共軛高分子的研究——Ⅲ.苯乙炔的热聚合

研究了苯乙炔在1.5,6和10小时的热聚合过程中温度对聚合物分子量的影响。所得结果表明,在150—500°的温度范围内,随着聚合温度的增高,聚合物的分子量都是逐渐降低,表明在高温时聚合物有裂解现象发生。红外光谱显示,400°所得聚合物的光谱吸收峯较之200°聚合物的为小,500°聚合物则出现无明显吸收峯的连续吸收,并且背景升高(“背景效应”)。聚合物的碳氢含量此同样随着聚合温度的升高而增大。这些结果,以及300°以上聚合物在溶液中显示明显的萤光等,被认为是表明聚苯乙炔在高温时发生结构改变,除裂解成小分子外,可能还有环化、脱氢、芳构化等发生,从而由链状结构变为稠环结构乃至三维共轭结构。 聚合物的电子自旋共振测试表明,聚苯乙炔的自由基浓度随下列顺序递增: 300°聚合物<400°聚合物<500°聚合物。     

分子印迹壳聚糖膜分离手性苯丙氨酸

以L-苯丙氨酸(L-Phe)为印迹分子,采用相转化法制备了分子印迹壳聚糖膜。分别采用碱液处理和硫酸交联两种方法对膜进行处理,降低了壳聚糖膜的溶胀度,印迹膜内识别位点的结构得以保持。采用FT-IR和SEM对膜的化学组成和结构形态进行了表征。通过渗透实验考察了分子印迹壳聚糖膜和非印迹空白壳聚糖膜对D,L-苯丙氨酸(D,L-Phe)混合物的手性拆分性能,并与空白膜进行了比较。印迹膜的分离因子达到1.43。     

羟基自由基引发的马来酸酐聚合反应机理AM1研究

用AM1方法计算了马来酸酐、羟基自由基及其加成产物α-羟基丁二酸酐基自由基的电子结构、电荷分布和键级.应用前线轨道理论和成键三原则研究了羟基自由基引发下马来酸酐聚合过程中α-羟基丁二酸酐基自由基活性中间体参与反应的可能性及其自由基聚合反应机理.计算结果表明:马来酸酐基态分子的HOMO和LUMO分别对应于双键CC的成键π-MO和反键π -MO;马来酸酐的羟基自由基加成反应活化能计算值为55 7kJ/mol;马来酸酐在羟基自由基引发下的自由基聚合产物是链式结构,与实验事实相符.     

2型糖尿病患者血清钙镁与甲状腺激素含量变化及临床意义

为了监测 2型糖尿病人血清钙、镁和甲状腺激素含量 ,分析其临床意义及相关性 ,应用放射免疫分析法测定了 1 1 5例 2型糖尿病及 1 5 0例健康人血清甲状腺激素含量。同时用美国杜邦RXL自动生化仪测定了其血清钙、镁含量。结果表明 ,在 2型糖尿病伴有明显并发症者血镁、FT3水平明显降低 (P <0 0 5 ) ,钙镁两种元素与甲状腺激素水平无明显相关性。 2型糖尿病患者适当补镁对预防其并发症是有益的 ,测定FT3 等可作为判断 2型糖尿病严重程度和估计预后的参考指标。     

CHARACTERIZATION OF AMPHIPHILIC AND MICROPHASE SEPARATED GRAFT COPOLYMERS Ⅱ SURFACE CHARACTERIZATION AND IN VITRO BLOOD-COMPATIBILITY ASSESSMENT OF POLYSTYRENE-GRAFT-ω-STEARYLPOLY (ETHYLENE OXIDE)*

This paper reported the research results concerning the surface characterization ofpolystyrene-graft-w-stearyl poly(ethylene oxide) (PS-g-SPEO) by means of XPS,contactangle measurement and TEM, and its in vitro blood compatibility assessment by measuringthe plasma recalcification time (RT) and partial thromboplastin time (PTT). The XPSresults demonstrated that the surface and bulk composition of the PS-g-SPEO graftcopolymers differ remarkably from each other,and that SPEO component was constantlyenriched at the copolymer/air interface. Contact angle studies indicated that the surfacewater wettability can be adjusted effectively by changing the composition of the copolymer.PS-g-SPEO graft copolymers can undergo microphase separation as clearly illustrated byTEM photographs. The relationship between the surface properties of PS-g-SPEO graftcopolymer and its blood compatibility was also discussed.     

SYNTHESIS OF THE POLYSTYRENE-TYPE ADSORBENTS CONTAINING POLAR GROUPS AND THEIR CAPACITIES IN THE ADSORPTION OF STEVIOSIDE AND GYPENOSIDES

Seven polystyrene-type adsorbents (Ⅰ—Ⅶ) were synthesized by the modification of styrene-divinylbenzene copolymer respectively with hydroxymethyl, aminomethyl, methoxymethyl, phenoxymethyl, (4-hydroxy phenoxy)methyl, (4-acetylphenoxy)methyl, and acetyl groups. Their structures were characterized with chemical methods and physical techniques. The adsorption capacities of the adsorbents to stevioside and gypenosides were determined via batch test in which the HPLC method was used for the analysis of Saponin concentration of solution. The results showed that all the adsorbents could adsorb these saponins to a certain extent, but Ⅵ and Ⅶ had large capacities owing to their moderate polarities.     

K-Ce_(0.5)Zr_(0.5)O_2催化碳颗粒物燃烧性能

用等体积浸渍法制备了不同K负载量的xKNO3-Ce0.5Zr0.5O2系列催化剂,用程序升温氧化反应(TPO)考察催化剂对碳颗粒物(soot)燃烧的催化活性.并采用XRD、BET、FT-IR、XPS等技术对KNO3负载催化剂进行表征.结果表明KNO3负载量对催化剂的比表面、表面化学环境有显著的影响;KNO3能使催化剂对soot的催化燃烧活性有较大提高,且存在最佳负载量,当x=0.5时,催化剂的活性最好,碳颗粒物的起燃温度(T)i和峰顶温度(Tp)分别为290℃和360℃.在反应过程中,KNO3熔融状态的形成和K2CO3的生成,使催化活性明显提高.     

正交试验法研制多烷基二氢化茚

双环苯型麝香化合物对香料工业具有重要意义。如粉檀麝香是合成麝香料。而1,1,2,3,3,5-六甲基-2.3-二氢化茚(HMI)则是制备粉檀麝香的母体化合物, 其经酰化后即可得到粉檀麝香。本文以对甲基异丙苯和2-甲基-丁烯-[2]为原料, 合成了HMI。     

水热法制备高纯超细CeO2-ZrO2复合氧化物

Superfine composite powders of CeO₂-ZrO₂ (CZ) and CeO₂-ZrO₂-La₂O₃ (CZL) were prepared by hydrothermal method. The effects of pH、temperature and time for hydrothermal process on the performance of the resulting powders were studied. The optimized reaction parameters were on follows: the precursor′s pH≈9.0, hydrothermal temperature of 200 ℃ holding for 2 h. Thermal stable powders with average particle size smaller than 10 nm and specific surface area of 171 m²·g^-1 were obtained. A BET specific surface area was still at 44 m²·g^-1 after calcination at 1 000 ℃ for 6 hours.     

A New Reaction-controlled Phase-transfer Catalyst System

A new reaction-controlled phase-transfer catalyst system was designed and synthesized.In this system, heteropolytungstate [C7H7N(CH3)3]9PW9O34 was used for catalytic epoxidation of cyclohexene with H2O2 as the oxidant. The conversion of H2O2 was 100% and the yield of cyclohexene oxide was 87.1% based on cyclohexene. Infrared spectra showed that both fresh catalyst and the recovered catalyst do have completely same absorption peak, indicating the structure of catalyst is very stability and can be recycled.