Separation and determination of seven fluoroquinolones by pressurized capillary electrochromatography

In this paper, pressurized CEC was used for the separation and determination of seven fluoroquinolones (FQs). The effect of different experimental conditions, such as the concentration and pH of the buffer, the organic modifier concentration, the surfactant and ion-paring agents added to the electrolyte, and applied voltage were studied. All the seven FQs were baseline separated using mobile phase containing 27% v/v ACN, 5 mmol/L Na2HPO4 buffer (pH 4.0 adjusted using citric acid), 11 mmol/L SDS, and 0.01% TEA v/v at detection wavelength of 287 nm and at an applied voltage of -10 kV. The calibration curves were linear (r>0.9991) over a concentration range of 1.0-50.0 mg/L for norfloxacin (NFLX); 2.5-50.0 mg/L for fleroxacin (FLX), ciprofloxacin (CPFX), and lomefloxacin (LMX); and 5.0-50.0 mg/L for enoxacin (ENX), ofloxacin (OFLX), and gatifloxacin (GFLX). The detection limits (S/N = 3) for ENX, OFLX, FLX, NFLX, CPFX, LMX, and GFLX were 0.5, 0.8, 0.4, 0.2, 0.4, 0.5, and 1.0 mg/L, respectively. The method is simple, rapid, and reproducible. It was successfully applied to the analysis of fish muscle samples spiked with FQs. Mean recoveries ranged from 81.6 to 97.6%.     

SYNTHESIS AND CHARACTERIZATION OF PHTHALAZINONE POLY(ARYL ETHER SULFONE KETONE)WITH CARBONYL GROUP*

A kind of novel heat-resistant, high performance engineering thermoplastic phthalazinone poly(aryl ether sulfoneketone) (PPESK) containing a carboxyl group in its side chain was prepared by the nucleophilic displacement reaction of 4-(4-hydroxylphenyl)-1(2H)-phthalazinone with di(4-chlorophenyl) sulfone, 4,4'-difluoro-benzophenone and phenolphthalin insulfolane in the presence of K_2CO_3 to produce high molecular weight polymers which can be dissolved in some polarsolvents such as chloroform and nitrobenzene at room temperature and can be easily can into flexible, yellowish andtransparent films. PPESK is an amorphous polymer having a decomposition temperature above 400℃, which indicates that ithas high thermal stability. At the same time, the thermal properties of PPESKs with dicyandiamide (DICY) as curing agentindicated that the heat-resistance properties of the PPESKs are improved after curing. The apparent activation energy (ΔE) ofthe cross-linking reaction and the reaction order (n) of PPESK/DICY were found to be 52.2 kJ/mol and ca. 1.0, respectively.Therefore, the cross-linking reaction is approximately a first order reaction.     

Oxidation Kinetics of the Potent Insulin Mimetic Agent Bis(maltolato)oxovanadium(IV) (BMOV) in Water and in Methanol

The kinetics of oxidation of bis(maltolato)oxovanadium(IV), BMOV or VO(ma)(2), by dioxygen have been studied by UV-vis spectroscopy in both MeOH and H(2)O media. The VO(ma)(2):O(2) stoichiometry was 4:1. In aqueous solution, the pH-dependent rate of the VO(ma)(2)/O(2) reaction to generate cis-[VO(2)(ma)(2)](-) is attributed to the deprotonation of coordinated H(2)O, the deprotonated species [VO(ma)(2)(OH)](-) being more easily oxidized (k(OH) = 0.39 M(-)(1) s(-)(1), 25 degrees C) than the neutral form VO(ma)(2)(H(2)O) (k(H)()2(O) = 0.08 M(-)(1) s(-)(1), 25 degrees C). The activation parameters for the two second-order reactions in aqueous solution were deduced from variable temperature kinetic measurements. In MeOH, VO(ma)(2) was oxidized by dioxygen to cis-VO(OMe)(ma)(2), whose structure was characterized by single-crystal X-ray diffraction; the crystals were monoclinic, C2/c, with a = 28.103(1) ?, b = 7.721(2) ?, c = 13.443(2) ?, beta = 94.290(7) degrees, and Z = 8. The structure was solved by Patterson methods and was refined by full-matrix least-squares procedures to R = 0.043 for 1855 reflections with I >/= 3sigma(I). The kinetic results are consistent with a mechanism involving an attack of O(2) at the V(IV) center, followed by the formation of radicals and H(2)O(2) as transient intermediates.     

某些新型冠醚-卟啉化合物的合成

本文以内消旋不对称单羟基-卟啉化合物1a～d合成了七种新型的冠醚-卟啉化合物3a～g和它们的中间体2a～g.这些化合物中的某些金属络合物对链烯的环氧化作用起催化作用, 它们的结构经元素分析,IR, UV和^1H NMR波谱证实.     

芥子气纯度测定不确定度分析与评定

采用酸碱滴定法测定芥子气纯度,对测量结果的不确定度进行评定。分析了测定过程中不确定度来源,包括滴定剂的标定、消耗滴定剂体积、样品称量等引入的不确定度及其计算方法,最后合成得到标准不确定度。当芥子气纯度测定结果为94.78%时,扩展不确定度为0.34%(k=2)。实验结果表明,样品称量引入的不确定度对测量结果的影响最大。     

Hydrogen bonding and π–π stacking in 6‐hydroxy­biochanin A monohydrate

In the lattice of the title compound (systematic name: 5,6,7‐trihydroxy‐4′‐meth­oxy­isoflavone monohydrate), C₁₆H₁₂O₆·H₂O, the isoflavone mol­ecules are linked into chains through R₄³(17) motifs composed via O—H⋯O and C—H⋯O hydrogen bonds. Centrosymmetric R₄²(14) motifs assemble the chains into sheets. Hydrogen‐bonding and aromatic π–π stacking inter­actions lead to the formation of a three‐dimensional network structure.     

草莓型SiO2/PMMA纳米复合微球的制备

在纳米二氧化硅水分散体系中,借助于碱性辅助单体1-乙烯基咪唑(1-VID)与未改性纳米二氧化硅表面羟基之间的酸-碱作用,通过1-VID与甲基丙烯酸甲酯(MMA)的自由基共聚合,制备了草莓型的SiO2/PMMA复合微球.整个反应过程中,纳米二氧化硅无需表面处理,体系中无需另外加入乳化剂或助乳化剂,微球表面吸附的纳米二氧化硅对颗粒起稳定作用.用动态光散射粒度分布仪测得复合微球粒径在120-330nm之间,热重分析结果表明,复合微球中二氧化硅含量介于15%-20%之间.透射电镜和扫描电镜显示所得复合微球具有草莓型结构,二氧化硅富集在表面.     

Advanced Current Collectors for Alkali Metal Anodes

High-energy-density batteries are in urgent need to solve the ever-increasing energy storage demand for portable electronic devices, electric vehicles, and renewable solar and wind energy systems. Alkali metals, typically lithium(Li), sodium(Na) and potassium(K), are considered as the promising anode materials owing to their low electrochemical potential, low density, and high theoretical gravimetric capacities. However, the problem of dendrite growth of alkali metals during their plating/stripping process will lead to low Coulombic efficiencies, a short lifespan and huge volume expansion, eventually hindering their practical commercialization. To resolve this issue, a very effective approach is engineering the anodes on structured current collectors. This review summarizes the development of the alkali metal batteries and discusses the recent advances in rational design of anode current collectors. First, the challenges and strategies of suppressing alkali-metal dendrite growth are presented. Then the special attention is paid to the novel current collector design for dendrite-free alkali metal anodes. Finally, we give conclusions and perspective on the current challenges and future research directions toward advanced anode current collectors for alkali metal batteries.     

一个锰(Ⅲ)Schiff碱配合物[Mn(napn)(CH_3OH)_2]ClO_4的合成与晶体结构

合成了一个新配合物[Mn(napn)(CH3OH)2]ClO4 (C26H26 Cl N2O8Mn,Mr = 584.88,H2napn = 双a-萘酚醛缩乙二胺),并测定了其晶体结构。晶体属于三斜晶系,空间群P ,a = 7.813(1),b = 13.025(2),c = 14.089(2) ? = 64.89(3), = 83.98(3), = 78.11(3)海琕 = 1270.16 ?,Z = 2, Dc = 1.529 g/cm3, F(000) = 604, R = 0.0837, wR = 0.1636。锰(Ⅲ)离子的配位构型为拉长的八面体。Schiff碱配体napn2-中的N2O2在赤道平面与锰(Ⅲ)形成四配位,2个CH3OH中的O原子分别在赤道平面两侧轴向位置与锰(Ⅲ)配位。由于Jahn-Teller效应,轴向上的MnO平均键长为2.52 拧A硗猓О写嬖诜肿幽诤头肿蛹淝饧?     

DNA-templated self-assembly of protein and nanoparticle linear arrays

Self-assembling DNA tiling lattices represent a versatile system for nanoscale construction. Self-assembled DNA arrays provide an excellent template for spatially positioning other molecules with increased relative precision and programmability. Here we report an experiment using a linear array of DNA triple crossover tiles to controllably template the self-assembly of single-layer or double-layer linear arrays of streptavidin molecules and streptavidin-conjugated nanogold particles through biotin-streptavidin interaction. The organization of streptavidin and its conjugated gold nanoparticles into periodic arrays was visualized by atomic force microscopy and scanning electron microscopy.