原子吸收法在有机分析中的应用（Ⅵ）香烟中氢氰酸的分析

原子吸收法在有机分析中的应用（Ⅵ）香烟中氢氰酸的分析谢志海，郎惠云，高云（西北大学化学系，西安，７１００６９）关键词：氢氰酸，测定，原子吸收光谱香烟中的尼古丁，烟焦油等含氮有机物燃烧后将产生氢氰酸，吸入人体后极为有害。国外在这方面的研究始于七十年代，...     

Crystal structure and morphology of phenyl‐capped tetraaniline in the leucoemeraldine oxidation state

A series of crystals of phenyl‐capped tetraaniline in the leucoemeraldine oxidation state were obtained at different isothermal temperatures and were observed directly under transmission electron microscope. The crystals obtained at higher temperatures exhibit more perfect structures than those obtained at lower temperatures. Both the lamella thickness and the crystal size increase with crystallization temperature. The tetraaniline is apt to form larger scale crystals under lower degree of supercooling. However, their crystal structures keep steady with the crystallization temperature. The tetramer was found to adopt a monoclinic lattice with unit cell parameter of a = 13.93 Å, b = 8.82 Å, c = 23.20 Å, and β = 95.03°, as determined using electron diffraction tilting method combined with wide‐angle X‐ray diffraction experiment. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 764–769, 2006     

红磷增效Al（OH）3／Mg（OH）2阻燃的聚丙烯结晶形态

借助宽角Ｘ－射线衍射、差热分析、偏光显微镜对红磷增效Ａｌ（ＯＨ）ａ和Ｍｇ（ＯＨ）２混合填充的阻燃聚丙烯体系的结晶形态进行了研究。发现这种体系中不仅出现ａ型而且还出现β型聚丙烯晶体。β型晶体可能是由于Ａｌ（ＯＨ）ａ和Ｍｇ（ＯＨ）ａ协同诱发而生成的。     

一种高效驱蚊剂的合成

一种高效驱蚊剂的合成高明章（西江大学轻工化学系肇庆５２６０６１）关键词驱蚊剂ＤＥＴＡ合成中图分类号Ｏ６２５．５为了驱避蚊虫，人们进行了多年的研究，合成了许多驱蚊剂，到１９７５年止，各国合成和试验过的化合物就有２５００种以上［１］。其中Ｎ，Ｎ－二乙基间...     

介孔材料在烯烃环氧化中的催化应用

本文综述了介孔材料在烯烃环氧化反应中的应用,包括材料的制备方法、催化性能以及活性中心的表征。通过硅钛原子的合理匹配可以达到四配位钛的高度分散,从而提高催化活性。硅烷化处理增加材料表面的疏水性,能够大幅度提高活性和选择性。通过多种谱学和分子模拟等手段可表征骨架钛及其配位情况。     

助熔剂N_aCl－CdCl_2对CdS∶Cu，In结晶状态作用规律研究

发现在确定的热处理温度和时间下，随炉料中助熔剂ＮａＣｌ－ＣｄＣｌ２，总含量的增加，ＣｄＳ：Ｃｕ，Ｉｎ多晶的粒度分布变窄，数均粒径具有最大值，晶粒外型趋于规整且表面平滑．进而证明，多晶的结晶状态对其光电性能具有显著的影响．     

硅酸盐中桥联键的机制及其性质的CNDO/2法研究

法计算模型,分析了桥联键的成键机制,解释了硅酸盐的通常性质。以体系总能量随桥角变化关系,解释了硅酸盐矿物及沸石分子筛中桥角Si-O-T出现的范围和几率。 由计算结果还发现,桥氧上具有较高的非键p-电子电荷Q_o~n,并随桥氧的第三配原子性质和距离R(M-O~(br))而变化,使桥氧具有授受电子的双重性质。在此基础上,探讨了沸石分子筛的碳离子催化活性机理,提出了锁与匙匹配原子对的催化活性中心的新观点。     

A microfluidic device using a green organic light emitting diode as an integrated excitation source

A simply fabricated microfluidic device using a green organic light emitting diode (OLED) and thin film interference filter as integrated excitation source is presented and applied to fluorescence detection of proteins. A layer-by-layer compact system consisting of glass/PDMS microchip, pinhole, excitation filter and OLED is designed and equipped with a coaxial optical fiber and for fluorescence detection a 300 microm thick excitation filter is employed for eliminating nearly 80% of the unwanted light emitted by OLEDs which has overlaped with the fluorescence spectrum of the dyes. The distance between OLED illuminant and microchannels is limited to approximately 1 mm for sensitive detection. The achieved fluorescence signal of 300 microM Rhodamine 6G is about 13 times as high as that without the excitation filter and 3.5 times the result of a perpendicular detection structure. This system has been used for fluorescence detection of Rhodamine 6G, Alexa 532 and BSA conjugates in 4% linear polyacrymide (LPA) buffer (in 1 x TBE, pH 8.3) and 1.4 fmol and 35 fmol mass detection limits at 0.7 nl injection volume for Alexa and Rhodamine dye have been obtained, respectively.