富氧条件下Ag/LaMn1-xPdxO3催化剂直接分解NO研究

分别使用柠檬酸络合法和浸渍法制备了钙钛矿型复合氧化物催化剂LaMn1-xPdxO3(x=0,0.01,0.02,0.03,0.04)和不同Ag负载量的Ag/LaMn0.99Pd0.01O3催化剂.使用XRD,BET手段对各催化剂进行了表征,同时在反应条件:NO 0.1%,O2 8%,H2O 0或10%,SO2 0或0.008%,N2为平衡气体,接触时间为0.03g·s·ml-1(GHSV=30000h-1)下对催化剂的活性进行了考察.实验结果发现,当贵金属Pd在B位部分替代Mn时,替代量x=0.01时的催化剂对于催化氧化分解NO反应具有最高活性.另外,在LaMn0.99Pd0.01O3催化剂上负载2%Ag也明显提高了催化剂的活性.而且LaMn0.99Pd0.01O3和2%Ag/LaMn0.99Pd0.01O3催化剂尽管抗水性能不好,但却具有较强的抗SO2性能.     

外力辅助分散作用下环氧树脂粘土纳米复合材料中粘土的微观结构与解离机理研究

采用不同分散方法(机械搅拌、高速均质搅拌和球磨分散)制备环氧树脂粘土纳米复合材料,研究了分散方法对不同有机粘土解离结构和纳米复合材料力学性能的影响,并在此基础上探讨了粘土的解离机理.结果表明,普通机械搅拌只能使小粒径粘土或大粒径粘土团聚体的外部片层解离;施加一定的外力(如高速均质搅拌)促进粘土团聚体分散,有利于粘土片层的解离;利用剪切摩擦作用较强的球磨法分散粘土,不同处理剂改性粘土的内外片层都可以充分解离,而有机改性剂中酸性质子的催化作用对粘土片层解离的影响不大,只要粒径足够小,片层解离的驱动力(基体弹性力、反应性等)能够克服其所受阻力(片层引力、层外基体粘性阻力、层内粘性引力等),粘土内外各片层将会同时向外迁移而解离.纳米复合材料的力学性能大大改善,冲击强度和弯曲强度分别提高近50%和8%;     

荧光共振能量转移测定杀虫单

1引言 研究了钙黄绿素（Calcein）与酚藏花红（PF）的荧光共振能量转移现象，并且将其作为探针用来测定杀虫单，扩大了荧光共振能量转移的应用领域。该方法准确、简便，灵敏度高，检出限低，同时能消除仪器噪音影响，结果令人满意。     

Catalytic Combustion of Methane over Ti-Pillared Clay Supported Copper Catalysts

A natural montmorillonite, produced from Laiyang of Shandong Province, was pillared by Tipolycations to form Ti-pillared clay (Ti-PILC), and characterized by BET surface area, infrared spectra and thermal analysis. The characterization results show that Ti-PILC has a larger surface area and more hydroxyl groups than that of the natural clay, thus was used as the catalytic carriers to prepare supported Cu catalysts (Cu/TiopILC). The 20%Cu/Ti-PILC with 10mmol/g of Ti/clay shows a high catalytic performance of methane combustion in the temperature range of 400-500℃.     

非超临界干燥法制备SiO2气凝胶

应用廉价的国产硅溶胶为原料，通过凝胶过程和干燥过程条件的选择，以非超临界干燥技术最终获得了块状SiO2气凝胶.该气凝胶外观状态与应用正硅酸乙酯为原料制得的完全一致，其微观结构也相当良好，其直径和孔分布均匀.溶液的配比和pH对凝胶过程和气凝胶样品的密度有比较明显的影响，同时pH值与SiO2的粒径之间也有一定的关系.依据制备条件的变化，所得SiO2气凝胶的密度约在200～400 kg•m－3，比表面在250～300 m2•g－1之间变化，平均孔径约为11～20 nm，而孔隙率在91％左右.     

Synthesis and Structural Characterization of two Novel Copper(I) Complexes with Oxygen Donor

Two novel copper(I) complexes with Cu‐O bonds, [Cu₂L₂(PPh₃)₂](BF₄)₂ ( 1 ) and [Cu(L)(dppeo)](BF₄) ( 2 ) ( L = 6‐(4‐diethylmethylphosphonatephenyl)‐2,2′‐bipyridine, dppeo = bis(diphenylphosphino)ethane monoxide), have been prepared and their structures characterized. In the binuclear complex 1 , the ligand L serves as tridentate donor with the N, N′ and O as coordination atoms, and the two Cu^I atoms are bridged through both P = O donor atoms in different ligand L with a triphenylphosphine molecule as auxiliary ligand. While in mononuclear complex 2 , both ligands L and dppeo behave as bidentate with N^∧N from L and P^∧O from dppeo chelating to Cu^I atom.     

Reversible anion exchanges between the layered organic-inorganic hybridized architectures: syntheses and structures of manganese(II) and copper(II) complexes containing novel tripodal ligands

Six noninterpenetrating organic-inorganic hybridized coordination complexes, [Mn(3)(2)(H(2)O)(2)](ClO(4))(2).2 H(2)O (5), [Mn(3)(2)(H(2)O)(2)](NO(3))(2) (6), [Mn(3)(2)(N(3))(2)].2 H(2)O (7), [Cu(3)(2)(H(2)O)(2)](ClO(4))(2) (8), [Mn(4)(2)(H(2)O)(SO(4))].CH(3)OH.5 H(2)O (9) and [Mn(4)(2)](ClO(4))(2) (10) were obtained through self-assembly of novel tripodal ligands, 1,3,5-tris(1-imidazolyl)benzene (3) and 1,3-bis(1-imidazolyl)-5-(imidazol-1-ylmethyl)benzene (4) with the corresponding metal salts, respectively. Their structures were determined by X-ray crystallography. The results of structural analysis of complexes 5, 6, 7, and 8 with rigid ligand 3 indicate that their structures are mainly dependant on the nature of the organic ligand and geometric need of the metal ions, but not influenced greatly by the anions and metal ions. While in complexes 9 and 10, which contain the flexible ligand 4, the counteranion plays an important role in the formation of the frameworks. Entirely different structures of complexes 5 and 10 indicate that the organic ligands greatly affect the structures of assemblies. Furthermore, in complexes 5 and 6, the counteranions located between the cationic layers can be exchanged by other anions. Reversible anion exchanges between complexes 5 and 6 without destruction of the frameworks demonstrate that 5 and 6 can act as cationic layered materials for anion exchange, as determined by IR spectroscopy, elemental analyses, and X-ray powder diffraction.     

Simultaneous determination of pantoprazole and its two metabolites in dog plasma by HPLC

A simple and sensitive high-performance liquid chromatography (HPLC) method is developed and validated for simultaneous determination of pantoprazole and its two metabolites (pantoprazole sulfone and pantoprazole thioether) in dog plasma and applied to a pharmacokinetic study in Beagle dogs. Following a protein precipitation procedure, the samples are separated using reversed-phase HPLC (C18) by a gradient of acetonitrile and ammonium acetate (pH 6.0) at a flow rate of 1.0 mL/min and quantitated using UV detection at 290 nm. Omeprazole is selected as the internal standard. The method has a lower limit of quantitation of 0.025 microg/mL for pantoprazole and its two metabolites, using 0.1-mL aliquots of plasma. The linear calibration curves are obtained in the concentration range of 0.025-10.0 microg/mL for three analytes. The intra- and interrun precision (relative standard deviation), calculated from quality control (QC) samples, is less than 13% for three analytes. The accuracy determined from QC samples is between -6.4% and 12%.