The Antioxidant and Hypolipidemic Effects of Mesona Chinensis Benth Extracts

In this study, the antioxidant and hypolipidemic effects of Mesona Chinensis Benth (MCB) extracts were evaluated. Seven fractions (F0, F10, F20, F30, F40, F50 and MTF) were obtained from the MCB ethanol extracts. Compared to the commercial antioxidants (vitamin C), MTF and F30 exhibited higher antioxidant activities in the antiradical activity test and the FRAP assay. The half-inhibition concentration (IC50) for MTF and F30 were 5.323 µg/mL and 5.278 µg/mL, respectively. MTF at 200 µg/mL significantly decreased the accumulation of TG in oleic acid (OA)-induced HepG2 cells and reversed the inhibitory effect of Compound C on AMPK (MTF and F30 significantly increased the glucose utilization of insulin-induced HepG2 cells). In addition, the components of MTF were identified by HPLC-MS, which were caffeic acid, quercetin 3-O-galactoside, isoquercetin, astragalin, rosmarinic acid, aromadendrin-3-O-rutinoside, rosmarinic acid-3-O-glucoside and kaempferol-7-O-glucoside. Through statistical correlations by Simca P software, it was found that the main antioxidant and hypolipidemic components of MCB might be caffeic acid, kaempferol-7-O-glucoside, rosmarinic acid-3-O-glucoside and aromadendrin-3-O-rutinoside, which may play important roles in the AMPK pathway. MTF and F30 in MCB could be potential health products for the treatment of hyperlipidemia.     

H2SO4-H2O中硝酸铜对脱硫石膏晶须生长的影响

以处理后的脱硫石膏为原料,在H₂SO₄-H₂O体系中以Cu(NO₃)₂为晶形控制剂采用水热法制备脱硫石膏晶须,探讨了Cu(NO₃)₂对脱硫石膏晶须生长的影响机理。结果表明:Cu(NO₃)₂对脱硫石膏有明显促溶作用,其中Cu²⁺可减小溶液中各离子的活度系数,使溶液中的Ca²⁺浓度增大。NO^-₃通过静电作用在Ca²⁺周围聚集并对SO^2-₄产生屏蔽作用,导致脱硫石膏继续溶解并使Ca²⁺和SO^2-₄的浓度处于相对稳定状态,有利于半水脱硫石膏晶体的形核与生长。此外,Cu²⁺还可在晶须的生长过程中选择性吸附在晶须表面,生成CuSO₄,促进了脱硫石膏的结晶生长,最终在Cu(NO₃)₂用量为2.0%(质量分数)时制备的脱硫石膏晶须长径比约为73。     

Te溶剂Bridgman法CdMnTe晶体核辐射探测器的制备和表征

碲锰镉(CdMnTe)作为性能优异的室温核辐射探测器材料,可用于环境监测和工业无损检测领域。本文中采用Te溶剂Bridgman法生长In掺杂Cd_0.9Mn_0.1Te晶体,制备成10 mm×10 mm×2 mm大小的室温单平面探测器,研究了该探测器对²⁴¹Am@59.5 keV γ射线源的能谱响应。通过表征红外透过率、电阻率以及探测器能谱响应等参数,综合评定了探测器用CdMnTe晶体的质量、电学和探测器性能。结果表明,晶片的红外透过率均在55%以上,最好可达到60%。采用湿法钝化,100 V偏压下的漏电流由钝化前的9.48 nA降为钝化后的7.90 nA,钝化后的电阻率为2.832×10¹⁰ Ω·cm。在-400 V反向偏压下,CdMnTe探测器对²⁴¹Am@59.5 keV γ射线源的能量分辨率在钝化前后分别为13.53%和12.51%,钝化后的电子迁移率寿命积为1.049×10^-3 cm²/V。研究了探测器的能量分辨率随电压的变化特性,当偏压≤400 V时,探测器的能量分辨率主要由载流子的收集效率决定,而当偏压>400 V时,能量分辨率由漏电流决定。本文研究结果表明,Te溶剂Bridgman法生长的CdMnTe晶体质量较好,电阻率和电子迁移率寿命积满足探测器制备需求。     

Transition-metal-free synthesis of 1,4-benzoxazepines via [4+3]-cycloaddition of para-quinone methides with azaoxyallyl cations

A formal[4+3]-cycloaddition reaction of ortho-hydroxyphenyl-substituted para-quinone methides(p-QMs)with in-situ generated azaoxyallyl cations is reported.The reaction occurs under very mild reaction conditions(transition-metal free,room temperature,cheap inorganic base)and provides a very efficient route to a series of biologically important 1,4-benzoxazepine derivatives in good to excellent yields.     

Fe3+对KDP晶体光学质量的影响

金属离子Fe3+对KDP晶体的生长和光学性质有明显影响.本文在前期研究的基础上[1]系统考察了该杂质离子对KDP晶体光学质量的影响.实验结果表明,三价金属离子Fe3+会降低KDP晶体的透光率,同时对晶体均匀性和光损伤阈值也有明显影响.光损伤阈值降低的主要原因在于杂质诱发缺陷导致的电子崩电离、多光子电离(尤其是双光子电离)等过程的发生.     

First Organic–Inorganic Hybrid Compounds Formed by Ge-V-O Clusters and Transition Metal Complexes of Aromatic Organic Ligands

Three compounds based on Ge-V-O clusters were hydrothermally synthesized and characterized by IR, UV-Vis, XRD, ESR, elemental analysis and X-ray crystal structural analysis. Both [Cd(phen)(en)]₂[Cd₂(phen)₂V₁₂O₄₀Ge₈(OH)₈(H₂O)]∙12.5H₂O (1) and [Cd(DETA)]₂[Cd(DETA)₂]_0.5[Cd₂(phen)₂V₁₂O₄₁Ge₈(OH)₇(0.5H₂O)]∙7.5H₂O (2) (1,10-phen = 1,10-phenanthroline, en = ethylenediamine, DETA = diethylenetriamine) are the first Ge-V-O cluster compounds containing aromatic organic ligands. Compound 1 is the first dimer of Ge-V-O clusters, which is linked by a double bridge of two [Cd(phen)(en)]²⁺. Compound 2 exhibits an unprecedented 1-D chain structure formed by Ge-V-O clusters and [Cd₂(DETA)₂]⁴⁺ transition metal complexes (TMCs). [Cd(en)₃]{[Cd(η₂-en)₂]₃[Cd(η₂-en)(η₂-μ₂-en)(η₂-en)Cd][Ge₆V₁₅O₄₈(H₂O)]}∙5.5H₂O (3) is a novel 3-D structure which is constructed from [Ge₆V₁₅O₄₈(H₂O)]¹²⁻ and four different types of TMCs. We also synthesized [Zn₂(enMe)₃][Zn(enMe)]₂[Zn(enMe)₂(H₂O)]₂[Ge₆V₁₅O₄₈(H₂O)]∙3H₂O (4) and [Cd(en)₂]₂{H₈[Cd(en)]₂Ge₈V₁₂O₄₈(H₂O)}∙6H₂O (5) (enMe = 1,2-propanediamine), which have been reported previously. In addition, the catalytic properties of these five compounds for styrene epoxidation have been assessed.     

Numerical Study on an RBF-FD Tangent Plane Based Method for Convection–Diffusion Equations on Anisotropic Evolving Surfaces

In this paper, we present a fully Lagrangian method based on the radial basis function (RBF) finite difference (FD) method for solving convection–diffusion partial differential equations (PDEs) on evolving surfaces. Surface differential operators are discretized by the tangent plane approach using Gaussian RBFs augmented with two-dimensional (2D) polynomials. The main advantage of our method is the simplicity of calculating differentiation weights. Additionally, we couple the method with anisotropic RBFs (ARBFs) to obtain more accurate numerical solutions for the anisotropic growth of surfaces. In the ARBF interpolation, the Euclidean distance is replaced with a suitable metric that matches the anisotropic surface geometry. Therefore, it will lead to a good result on the aspects of stability and accuracy of the RBF-FD method for this type of problem. The performance of this method is shown for various convection–diffusion equations on evolving surfaces, which include the anisotropic growth of surfaces and growth coupled with the solutions of PDEs.     

Benzothiadiazole-based Conjugated Polymers for Organic Solar Cells

Benzothiadiazole(BT) is an electron-deficient unit with fused aromatic core, which can be used to construct conjugated polymers for application in organic solar cells(OSCs). In the past twenty years, huge numbers of conjugated polymers based on BT unit have been developed,focusing on the backbone engineering(such as by using different copolymerized building blocks), side chain engineering(such as by using linear or branch side units), using heteroatoms(such as F, O and S atoms, and CN group), etc. These modifications enable BT-polymers to exhibit distinct absorption spectra(with onset varied from 600 nm to 1000 nm), different frontier energy levels and crystallinities. As a consequence, BT-polymers have gained much attention in recent years, and can be simultaneously used as electron donor and electron acceptor in OSCs, providing the power conversion efficiencies(PCEs) over 18% and 14% in non-fullerene and all-polymer OSCs. In this article, we provide an overview of BTpolymers for OSCs, from donor to acceptor, via selecting some typical BT-polymers in different periods. We hope that the summary in this article can invoke the interest to study the BT-polymers toward high performance OSCs, especially with thick active layers that can be potentially used in large-area devices.     

Brightness Temperature Emitted by Radiometer Calibration Load at Millimeter Wave Band

In this paper, the DVRT (vector radiative transfer theory of densely distributed random discrete scatters) model to calculate the brightness temperature emitted by radiometer calibration load is presented. It takes the multiple scattering of isolation layer into account, which is neglected by the incoherent homogeneous model often used in calibration. Hence, it works much better than incoherent homogeneous model at millimeter wave band. Furthermore, the iteration of DVRT model is presented, and it proves that the incoherent homogeneous model is just the zero-order solution of DVRT model. Some numerical results are provided in the end.