Influence of nonionic emulsifier included inside carboxylated polymer particles on the formation of multihollow structure by the alkali/cooling method

The influence of nonionic emulsifier, included inside styrene-methacrylic acid copolymer [P(S-MAA)] particles during emulsion copolymerization, on the formation of multihollow structure inside the particles via the alkali/cooling method (proposed by the authors) was examined in comparison to emulsifier-free particles. It was clarified that the nonionic emulsifier included inside the P(S-MAA) particles eased the formation of multihollow structure.Part CCL of the series studies on suspension and emulsion     

Unusual volumetric and hydration behavior of the catanionic system sodium undecenoate: sodecyltrimethylammonium bromide

Following the studies on the effect of double bonds in the surfactant hydrophobic tail on the formation of mixed surfactant aggregates, we studied the viscosity and density of the system Sodium 10-undecenoate (SUD)–decyltrimethylammonium bromide (DTAB)–water. We found that the partial molar volume (pmv) and intrinsic viscosity of both, micellised and unmicellised mixtures, are non-ideal, dependent on the mixture composition and related to structural changes in micelles. These phenomena are caused by the presence of the double bond at the distal extreme of the SUD molecule, which has some affinity with water by formation of hydrogen bonds. In particular, as far as we know, this is the first report on non-ideal behavior of the pmv in mixed micelles.     

The aqueous cationic system sodium undecenoate-dodecyltrimethylammonium bromide at low concentration

The aqueous sodium undecenoate (SUD) –dodecyltrimethylammonium bromide (DTAB) catanionic system was studied at low concentration. The system did not precipitate, even at a 1:1 SUD:DTAB proportion, but showed the formation of a coacervate in a range of surfactant mixture compositions. Micelles have a preferential composition of 0.37 mole fraction of SUD. This behavior is attributed to the presence of the double bond at the distal extreme of the SUD molecule, which can form hydrogen bonds with water. Consequently, the –CH=CH₂ group is situated at the interface between the hydrocarbon micelle core and water, reducing the interfacial free energy. Structural computations demonstrate that the mentioned SUD proportion produces complete coverage of the micelle surface by the double bonds.     

Hydrogels in aqueous phases of polyvinylalcohol (PVA), surfactants and clay minerals

Aqueous solutions of synthetic clay minerals have been studied in the presence of surfactants and water-soluble polyvinylalcohol (PVA). The PVAs (PVA 1, PVA 2) had a molecular weight of about 10⁵ Dalton and a degree of hydrolysis of 82%. The PVA-samples were surface active and lowered the surface tension to 43 mN/m. As a consequence of their amphiphilic nature the PVA molecules bind strongly to clay mineral particles. On saturation the clay mineral particles adsorb the fivefold weight of PVA of their own weight. It is concluded that the thickness of the adsorbed layers on both sides of the clay mineral is in the range of the hydrodynamic diameter of the PVA-coils in the bulk phase.When the clay mineral particles are not saturated with PVA, they act as cross-linking agents for the PVA. The whole systems are physically cross-linked and assume gel-like properties. Rheological measurements show that samples behave like soft matter with a yield stress value. All of them have a frequency independent storage modulus which is an order of magnitude larger than the loss modulus. The hydrogels become stronger as PVA concentration increases.Small amounts of cationic surfactants bind on the clay mineral. The interface of the clay mineral becomes more hydrophobic and the binding of the PVA on the clay mineral is strengthened. With rising concentration of the surfactant the surfactant molecules bind on PVA and the PVA becomes hydrophilic. As a consequence the PVA can no longer bind on the clay mineral and the gels transform to viscous and turbid solutions. Small amounts of cationic surfactants therefore stiffen the hydrogels while larger amounts cause phase separation and a solution with low viscosity. Anionic surfactants like SDS do not bind on the clay mineral, but strongly on the PVA. With increasing SDS concentration, the hydrogels become stiffer at first but thereafter they break and transform to viscous fluids.In PVA-solutions without the clay minerals both cationic and anionic surfactants bind to the PVAs in the aqueous solution. With increasing concentration of surfactant, the viscosities of the solutions pass over a maximum. In this respect the PVAs behave like hydrophobically modified water soluble polymers. The surfactants bind to the hydrophobic microdomain and thereby crosslink the polymer molecules. On saturation the polyvinyl alcohol with anionic surfactant become hydrophilic and the network character disappears to a certain extent.     

Intramolecular charge transfer in pyrromethene laser dyes: photophysical behaviour of PM650.

Absorption and fluorescence (steady-state and time-correlated) techniques are used to study the photophysical characteristics of the pyrromethene 650 (PM650) dye. The presence of the cyano group at the 8 position considerably shifts the absorption and fluorescence bands to lower energies with respect to other related pyrromethene dyes; this is attributed to the strong electron-acceptor character of the cyano group, as is theoretically confirmed by quantum mechanical methods. The fluorescence properties of PM650 are intensively solvent-dependent. The fluorescence band is shifted to lower energies in polar/protic solutions, and the evolution of the corresponding wavelength with the solvent is analysed by a multicomponent linear regression. The fluorescence quantum yield and the lifetime strongly decrease in polar/protic solvents, which can be ascribed to an extra nonradiative deactivation, via an intramolecular charge-transfer state (ICT state), favoured in polar media.     

Regioselective N-vinylation of cyclic thionocarbamates through a vinyl bis-sulfone methodology

A vinyl bis-sulfone Michael type approach towards heteroatom vinylation was applied on nitrogen derivatives. Cyclic thionocarbamates--mainly 1,3-oxazolidine-2-thiones--were converted into their N-vinyl counterparts; the procedure proved particularly efficient in the case of carbohydrate-derived complex structures.     

Ultraviolet radiation, vitamin D and risk of prostate cancer and other diseases

Most common diseases appear to result from complex, poorly understood interactions between genetic and environmental factors. Relatively few factors have been unequivocally linked with disease risk or outcome. Evidence from various studies using different experimental approaches has been interpreted as showing that, apart from its harmful effects on the pathogenesis of the common skin cancers, ultraviolet radiation (UVR) may exert a beneficial effect on development of various internal cancers and other pathologies. This concept is supported by parallel studies showing that hypovitaminosis D is linked with increased risk of various diseases including insulin resistance and multiple sclerosis. These findings suggest that, first, host factors such as skin pigmentation that affect UVR-induced synthesis of vitamin D and, second, polymorphism in genes that mediate the effectiveness of vitamin D action are susceptibility candidates for a variety of diseases. Collectively, these data suggest the hypothesis that, via effects on vitamin D synthesis, UVR exposure has beneficial effects on susceptibility and outcome to a variety of complex diseases. We describe evidence from studies in various diseases, but mainly from prostate cancer patients, that supports this hypothesis, but we emphasize that, although supportive data are available, the concept is unproven. Indeed, other explanations are possible. However, given the potentially important public health implications of the hypothesis and the potential for the development of novel therapeutic modalities, we believe the concept is worthy of further investigation.     

Novel 99mTc labeled σ receptor ligand as a potential tumor imaging agent

A novel ^99mTc labeled complex, [N-[2-((2-oxo-2-(4-(3-phenylpropyl)piperazin-1-yl)ethyl) (2-mercaptoethyl)amino)acetyl]-2-aminoethanethiolato]Technetium(V) oxide (PPPE-MAMA’-^99mTcO) ([ ^99m Tc]-2) has been designed and prepared based on the integrated approach. The corresponding rhenium complex (PPPE-MAMA’-ReO)(Re-2) has been prepared and characterized. In vitro competition binding assays show moderate affinity of Re-2 towards σ₁ and σ₂ receptors with K _i values of 8.67 ± 0.07 and 5.71 ± 1.88 μmol, respectively. Planar images obtained at 0.5 h, 4 h, 20 h after i.v. injection indicate the accumulation of [ ^99m Tc]-2 in MCF-7 human breast tumor bearing mice at 20 h. Furthermore, the accumulation of [ ^99m Tc]-2 has been inhibited at 20 h after co-injection of [ ^99m Tc]-2 plus haloperidol (1 mg/kg). Biodistribution studies of [ ^99m Tc]-2 display an in vivo tumor uptake of 0.14% ± 0.01% ID/g at 24 h post i.v. injection with a tumor/muscle ratio of 6.02 ± 0.87. The above results suggest that [ ^99m Tc]-2, derived from a previously published lead compound, retains certain tumor uptake and affinity for σ receptors. [ ^99m Tc]-2 may be used as a basis for further structural modifications to develop tumor imaging agents with high affinity for σ receptors.     

Removal of nickel from water and synthetic nuclear power plant coolant water by ion exchange resins

A method for the removal of nickel from waste water by adsorption process on ion exchange resin was studied. The percentage removal of nickel depends upon the contact time, pH and dose of adsorbent. Adsorption of nickel on ion exchange resins obeys Freundlich adsorption isotherm. The applicability of Lagergren kinetic model has also been investigated. In order to understand the adsorption behavior of nickel, a number of batch experiments were conducted at various pH values. The results show that the adsorption is maximum in the pH range 2 to 8. The studies showed that the ion exchange resins IRN77 and SKN1 can be used as an efficient adsorbent material for the removal of Ni(II) from water and coolant water.     

Dynamics studies on thermoresponsive poly(<Emphasis Type="Italic">N</Emphasis>-isopropylacrylamide) hydrogel in tetrahydrofuran/water mixtures

The properties of thermoresponsive poly(N-isopropylacrylamide) (PNIPAAm) hydrogel in tetrahydrofuran/H₂O mixtures were studied. Scanning electron microscopic (SEM) images demonstrate that the hydrogel changes from homogeneous to heterogeneous microstructure upon the addition of tetrahydrofuran to water. This heterogeneous PNIPAAm hydrogel in the mixture solvent exhibits a very slow response rate at temperatures above its lower critical solution temperature. The decreased response rate is attributed to the formation of special ternary complexes including the polymer and the two solvents in the tetrahydrofuran/H₂O mixture. Factors controlling the thermoresponse rate are discussed further and several suggestions are provided for designing and developing fast-response PNIPAAm hydrogels in the future.