X‐ray excited optical luminescence from crystalline silicon

Synchrotron based X‐ray excited optical luminescence (XEOL) has been measured with many direct bandgap semiconductors. We present XEOL measurements on crystalline silicon (Si), obtained despite of its indirect bandgap and the consequently low luminescence efficiency. Spectra of monocrystalline and multicrystalline (mc) Si at room temperature are compared to theoretical spectra. A possible application in the synchrotron‐based research on mc‐Si is exemplified by combining XEOL, X‐ray fluorescence (XRF) spectroscopy, photoluminescence (PL) spectroscopy, and microscope images of grain boundaries. This approach can be utilized to investigate the recombination activity of metal precipitates, to analyze areas of different lifetimes on mc‐Si samples and to correlate additional material parameters to XRF measurements. (© 2009 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Two Parton Shower Background for Associate <Emphasis Type="Italic">W</Emphasis> Higgs Production

The estimates of the background for the associate W Higgs production, which stems from the two parton shower production, leads to a background which is of the order of the signal for the non-perturbative contribution. In the perturbative approach the background turns out to be small. This background does not depend on the rapidity difference between the W and the pair, while the signal peaks when the rapidity difference is zero. Detailed calculations for the enhanced diagrams’ contribution to this process are presented, and it is shown that the overlapping singularities, being important theoretically, lead to a small contribution for the LHC range of energies.     

Benzene formation in premixed fuel-rich 1,3-butadiene flames

Detailed kinetic modeling and flame-sampling molecular-beam time-of-flight mass spectrometry are combined to unravel important pathways leading to the formation of benzene in a premixed laminar low-pressure 1,3-butadiene flame. The chemical kinetic model developed is compared with new experimental results obtained for a rich (? = 1.8) 1,3-butadiene/O₂/Ar flame at 30 Torr and with flame data for a similar but richer (? = 2.4) flame reported by Cole et al. [Combust. Flame 56 (1) (1984) 51-70]. The newer experiment utilizes photoionization by tunable vacuum-ultraviolet synchrotron radiation, which allows for the identification and separation of combustion species by their characteristic ionization energies. Predictions of mole fractions as a function of distance from the burner of major combustion intermediates and products are in overall satisfactory agreement with experimentally observed profiles. The accurate predictions of the propargyl radical and benzene mole fractions permit an assessment of potential benzene formation pathways. The results indicate that C₆H₆ is formed mainly by the C₃H₃ + C₃H₃ and i-C₄H₅ + C₂H₂ reactions, which are roughly of equal importance. Smaller contributions arise from C₃H₃ + C₃H₅. However, given the experimental and modeling uncertainties, other pathways cannot be ruled out.     

Metal-dielectric-metal plasmonic waveguide devices for manipulating light at the nanoscale Invited Paper

We review some of the recent advances in the development of subwavelength plasmonic devices for ma- nipulating light at the nanoscale, drawing examples from our own work in metal-dielectric-metal (MDM) plasmonic waveguide devices. We introduce bends, splitters, and mode converters for MDM waveguides with no additional loss. We also demonstrate that optical gain provides a mechanism for on/off switch- ing in MDM plasmonie waveguides. Highly efficient compact couplers between dielectric waveguides and MDM waveguides are also introduced.     

High-performance liquid chromatography determination of nitrated polycyclic aromatic hydrocarbons by indirect fluorescence detection

A high-performance liquid chromatography (HPLC) method for the analysis of nitrated polcyclic aromatic hydrocarbons (NPAHs) is reported. NPAH mixtures were pre-concentrated using solid-phase extraction and well resolved on a C(18) column. They were detected using an indirect method involving the quenching of the emission from the fluorophores 5,6,7,8-tetrahydronaphthol (5,6,7,8-THN-1-OH), 7-amino-4-methyl coumarin (Coumarin 120, COU-120) and 3-hydroxy-4-(2-hydroxy-4-sulfo-1-naphthylazo)2-naphthalene carboxylic acid (Calcon carboxylic acid, CCA). Linear calibration curves were obtained in the range 1.1 x 10(-9) to 1.1 x 10(-8) mol/L. Using COU 120 as the fluorophore, the detection limit was 2.9 x 10(-10) mol/L for 1-nitronaphthalene and 2.1 x 10(-11) mol/L for 2-nitrofluorene. Recoveries of NPAHs from spiked tap water samples were between 88 and 100%.     

Solubility of CO2 in CO2-philic oligomers; COSMOtherm predictions and experimental results

We report the solubility of carbon dioxide in four physical solvents and compare our data to predicted phase behavior using the conductor-like screening model for real solvents (COSMO-RS) formalism. The solubility data are presented in pressure-composition (Px) diagrams as well as Henry's law coefficients on a wt% basis at 298.15 K. The oligomers presented in this study are poly ethylene glycol di-methyl ether (PEGDME), perfluoro polyether (PFPE), poly di-methyl siloxane (PDMS), and poly propylene glycol di-methyl ether (PPGDME), which is a new solvent designed for this application by our group. These oligomers had 2–5 repeat units. We assess these four oligomers for capturing CO₂ from high-pressure streams. The COSMO-RS formalism is able to qualitatively and to some extent quantitatively describe solubilities of CO₂ in each of the oligomers.     

Thermodynamics, adsorption kinetics and rheology of mixed protein-surfactant interfacial layers

Depending on the bulk composition, adsorption layers formed from mixed protein/surfactant solutions contain different amounts of protein. Clearly, increasing amounts of surfactant should decrease the amount of adsorbed proteins successively. However, due to the much larger adsorption energy, proteins are rather strongly bound to the interface and via competitive adsorption surfactants cannot easily displace proteins. A thermodynamic theory was developed recently which describes the composition of mixed protein/surfactant adsorption layers. This theory is based on models for the single compounds and allows a prognosis of the resulting mixed layers by using the characteristic parameters of the involved components. This thermodynamic theory serves also as the respective boundary condition for the dynamics of adsorption layers formed from mixed solutions and their dilational rheological behaviour. Based on experimental studies with milk proteins (β-casein and β-lactoglobulin) mixed with non-ionic (decyl and dodecyl dimethyl phosphine oxide) and ionic (sodium dodecyl sulphate and dodecyl trimethyl ammonium bromide) surfactants at the water/air and water/hexane interfaces, the potential of the theoretical tools is demonstrated.The displacement of pre-adsorbed proteins by subsequently added surfactant can be successfully studied by a special experimental technique based on a drop volume exchange. In this way the drop profile analysis can provide tensiometry and dilational rheology data (via drop oscillation experiments) for two adsorption routes — sequential adsorption of the single compounds in addition to the traditional simultaneous adsorption from a mixed solution. Complementary measurements of the surface shear rheology and the adsorption layer thickness via ellipsometry are added in order to support the proposed mechanisms drawn from tensiometry and dilational rheology, i.e. to show that the formation of mixed adsorption layer is based on a modification of the protein molecules via electrostatic (ionic) and/or hydrophobic interactions by the surfactant molecules and a competitive adsorption of the resulting complexes with the free, unbound surfactant. Under certain conditions, the properties of the sequentially formed layers differ from those formed simultaneously, which can be explained by the different locations of complex formation.     

Structure–composition sensitivity in “Metallic” Zintl phases: A study of Eu(Ga1−xTtx)2 (Tt=Si, Ge, 0≤x≤1)

Two isoelectronic series, Eu(Ga_1−xTt_x)₂ (Tt=Si, Ge, 0≤x≤1), have been synthesized and characterized by powder and single-crystal X-ray diffraction, physical property measurements, and electronic structure calculations. In Eu(Ga_1−xSi_x)₂, crystal structures vary from the KHg₂-type to the AlB₂-type, and, finally, the ThSi₂-type structure as x increases. The hexagonal AlB₂-type structure is identified for compositions 0.18(2)≤x<0.70(2) with Ga and Si atoms statistically distributed in the polyanionic 6³ nets. As smaller Si atoms replace Ga atoms while the number of valence electrons increases, the lattice parameters, unit cell volumes, and Ga–Si distances in this phase region decrease significantly. Although aspects of X-ray diffraction results suggest puckering of the 6³ nets for the Si-richest example of the AlB₂-type Eu(Ga_1−xSi_x)₂, the complete experimental evidence remains inconclusive. On the other hand, in Eu(Ga_1−xGe_x)₂, six different structural types were observed as x varies. In addition to EuGa₂ (KHg₂-type; space group Imma) and EuGe₂ (own structure type, space group P3¯m1), the ternary phases studied show four different structures: the AlB₂-type for Ga-rich compositions; the YPtAs-type structure for EuGaGe; and two new structures, which are intergrowths of the YPtAs-type EuGaGe and EuGe₂, for Ge-rich compositions. These two Ge-rich phases include: (1) Eu(Ga_0.45(2)Ge_0.55(2))₂ containing two YPtAs-type motifs of EuGaGe plus one EuGe₂ motif; and (2) Eu(Ga_0.40(2)Ge_0.60(2))₂ containing one YPtAs-type motif alternating with a split site at and z=0.4798(2) with ca. 50% site occupancy by Ga and Ge along the c-axis. Magnetic susceptibilities of three Eu(Ga_1−xGe_x)₂ compounds display Curie–Weiss behavior above ca. 100 K, and show effective magnetic moments indicative of divalent Eu with a 4f⁷ electronic configuration, consistent with. X-ray absorption spectra (XAS). Density of states (DOS) and crystal orbital Hamilton population (COHP) analyses, based on first principles electronic structure calculations, rationalize the observed homogeneity ranges of the AlB₂-type phases in both systems and the structural variations as a function of Tt content.