Bacterial Cellulose Nanopaper as Reinforcement for Polylactide Composites: Renewable Thermoplastic NanoPaPreg

Bacterial cellulose (BC) is often regarded as a prime candidate nano‐reinforcement for the production of renewable nanocomposites. However, the mechanical performance of most BC nanocomposites is often inferior compared with commercially available polylactide (PLLA). Here, the manufacturing concept of paper‐based laminates is used, i.e., “PaPreg,” to produce BC nanopaper reinforced PLLA, which has been called “nanoPaPreg” by the authors. It is demon­strated that high‐performance nanoPaPreg (v_f = 65 vol%) with a tensile modulus and strength of 6.9 ± 0.5 GPa and 125 ± 10 MPa, respectively, can be fabricated. It is also shown that the tensile properties of nanoPaPreg are predominantly governed by the mechanical performance of BC nanopaper instead of the individual BC nanofibers, due to difficulties impregnating the dense nanofibrous BC network.

     

Comparison of detectability limits for elemental mapping by EF-TEM and STEM-XEDS

The analytical sensitivity in terms of the signal-to-noise ratio (SNR) was investigated for elemental mapping by a transmission electron microscope equipped with an energy filter (EF-TEM) and a scanning transmission electron microscope with an X-ray energy dispersive spectrometer (STEM-XEDS). To compare the detectability limits of the elemental maps by the two techniques, homogeneous Cu-0.98+/-0.34 wt% Mn and Cu-4.93+/-0.49 wt% Mn thin specimens were used. Elemental maps can be considered as either an image or a spectrum. Therefore, the detectability limits of the elemental maps were characterized by the spectral SNR. To evaluate the detectability limits of the elemental maps with statistical confidence limits such as 1 sigma, 2 sigma and 3 sigma, the SNR values were reviewed from the statistical point of view. In STEM-XEDS mapping, the spectral SNR values improve as the specimen thickness increases since the signal intensity increases. Conversely, the spectral SNR in EF-TEM mapping is maximized at a certain thickness and then reduces as the thickness increases. To compare the two mapping techniques with regard to the analytical sensitivity, a method to estimate the minimum mass fraction (MMF) from measured signal and background intensities was developed. In this experimental approach, the MMF value can be evaluated by selecting the appropriate SNR value corresponding to the statistical confidence limits. In comparing the estimated MMF values from the two mapping approaches, EF-TEM mapping can be more sensitive than STEM-XEDS mapping up to specimen thicknesses <20-30 nm in the 1 sigma confidence limit and < approximately 50 nm in the 3 sigma limits. However, as the specimen thickness increases, the XEDS maps provide better detectability limits in the Cu-Mn dilute alloy specimens.     

Improving spatiotemporal resolution of USPIO-enhanced dynamic imaging of rat kidneys

This paper addresses the problem of enhancing spatiotemporal resolution of ultra-small superparamagnetic iron oxide (USPIO)-enhanced dynamic MRI of rat kidneys. To alleviate the limited resolution problem of conventional full-scan Fourier imaging methods, we use a generalized series-based imaging scheme to reduce coverage of kappa-space. Experimental results demonstrate that the generalized series imaging method with basis functions constructed using two references (pre- and post-contrast) can reduce the number of phase encodings measured during the dynamic contrast wash-in process by a factor of 4 with a negligible or minimal loss of image quality. The method is expected to make 3D studies possible using USPIO-enhanced dynamic imaging of rat kidneys, and prove valuable for early detection of renal rejection after kidney transplantation.     

A qualitative study on the pulsatile flow phenomenon in a dense fly ash pneumatic conveyor

Understanding of the dynamic particulate flow structures within a dense gas-fly ash pneumatic conveyor must be improved in order to better aid its design guidance.The complex pulsatile movement of the gas-fly ash mixture dominates the flow performance within the pipeline,and historically,non-invasive measurement devices such as the electrical capacitance tomography（ECT） were often used to sufficiently capture the flow dynamics.However,inadequate studies have been conducted on the pulsatile flow phenomenon,which directly relate to the gas-fly ash two-phase flow performance.This paper aims to investigate the pulsatile flows using an ECT device.Initially,pulsatile flow patterns under various experimental conditions were obtained through ECT.Pulses within a flow were then characterised into pulse growth and decay segments,which represent the superficial fluidisation and deaeration processes during conveying.Subsequently,structural and statistical analyses were performed on the pulse growth and decay segments.Results suggested that the increasing air mass flow rate led to the decrease of the superficial fluidisation/deaeration magnitude,however,the increase of the superficial fluidisation/deaeration durations.Also,the air mass flow rate was indicated as the dominant factor in determining the pulsing statistical parameters.This research provides fundamental insights for further modelling the dense fly ash pneumatic flows.     

Infrared spectroscopic study of natural hydrotalcites carrboydite and hydrohonessite

Infrared spectroscopy has proven most useful for the study of anions in the interlayer of natural hydrotalcites. A suite of naturally occurring hydrotalcites including carrboydite, hydrohonessite, reevesite, motukoreaite and takovite were analysed. Variation in the hydroxyl stretching region was observed and the band profile is a continuum of states resulting from the OH stretching of the hydroxyl and water units. Infrared spectroscopy identifies some isomorphic substitution of sulphate for carbonate through an anion exchange mechanism for the minerals carrboydite and hydrohonessite. The infrared spectra of the CO3 and SO4 stretching region of takovite is complex because of band overlap. For this mineral some sulphate has replaced the carbonate in the structure. In the spectra of takovites, a band is observed at 1346 cm(-1) and is attributed to the carbonate anion hydrogen bonded to water in the interlayer. Infrared spectroscopy has proven most useful for the study of the interlayer structure of these natural hydrotalcites.     

Numerical errors and chaotic behavior in docking simulations

This work examines the sensitivity of docking programs to tiny changes in ligand input files. The results show that nearly identical ligand input structures can produce dramatically different top-scoring docked poses. Even changing the atom order in a ligand input file can produce significantly different poses and scores. In well-behaved cases the docking variations are small and follow a normal distribution around a central pose and score, but in many cases the variations are large and reflect wildly different top scores and binding modes. The docking variations are characterized by statistical methods, and the sensitivity of high-throughput and more precise docking methods are compared. The results demonstrate that part of docking variation is due to numerical sensitivity and potentially chaotic effects in current docking algorithms and not solely due to incomplete ligand conformation and pose searching. These results have major implications for the way docking is currently used for pose prediction, ranking, and virtual screening.     

Enantiomeric natural products: occurrence and biogenesis

In nature, chiral natural products are usually produced in optically pure form-however, occasionally both enantiomers are formed. These enantiomeric natural products can arise from a single species or from different genera and/or species. Extensive research has been carried out over the years in an attempt to understand the biogenesis of naturally occurring enantiomers; however, many fascinating puzzles and stereochemical anomalies still remain.     

Structures and energetics of electrosprayed uracil(n)Ca2+ clusters (n = 14-4) in the gas phase

Clusters of uracil (U) about a calcium dication, U(n)Ca(2+) (n = 14-4), have been studied in the gas phase by both experimental and theoretical methods. Temperature dependent blackbody infrared radiative dissociation (BIRD) experiments were performed on U(n)Ca(2+) clusters with n = 14-5 and the observed Arrhenius parameters are reported here. Master equation modeling of the BIRD kinetics data was carried out to determine threshold dissociation energies. Initial geometry calculations were performed using the B3LYP density functional and 3-21G(d) basis set. A sample of ten conformations per cluster was obtained through a simulated annealing study. These structures were optimized using B3LYP/6-31G(d) level of theory. Fragment-based hybrid many body interaction (HMBI) MP2/6-311++G(2df,2p)/Amoeba calculations were performed on representative conformations to determine theoretical binding energies. Results were examined in relation to cluster size (n). A significant increase in the energy required to remove uracil from U(6)Ca(2+) when compared to larger clusters supports previous reports that the calcium ion is coordinated by six uracil molecules in the formation of an inner shell. For clusters larger than n = 6, an odd-even alternation in threshold dissociation energies was observed, suggesting that the outer shell uracil molecules bind as dimers to the inner core. Proposed binding schemes are presented. Multiple structures of U(5)Ca(2+) are suggested as being present in the gas phase where the fifth uracil may be either part of the first or second solvation shell.     

Pushing the limit: synthesis, photophysical and DNA binding studies of a NIR-emitting Ru(II)-polypyridyl probe with 'light switch' behaviour

The new Ru(II) polypyridyl complex 1 was synthesised using microwave irradiation from the new polypyridyl ligand 2'DipyTAP', and its photophysical properties, and DNA binding abilities were investigated using various spectroscopic techniques; and 1 was shown to act as a 'NIR molecular light switch' for DNA with an emission window between 680 and 860 nm.