Characterizations for Vinylimidazolium Based Ionic Liquid Polymer Stationary Phases for Capillary Gas Chromatography

Six polyvinylimidazolium based ionic liquids were prepared for use as stationary phases for gas chromatography. The influences of the attached side-chains (hexyl-, octyl- and phenylpropyl-) on the vinylimidazolium cations and of different counter ions (bromide, hexafluorophosphate, bis-trifluoromethanesulfonlyimide, and bis-trifluoroethanesulfonylimide) were studied. Linear solubility parameter experiments were conducted to characterize the specific interactions of these stationary phases. Some of the polymerized ionic liquid stationary phases exhibited unique structural selectivity. m-, and p-xylenes could be distinguished. The preparation of the polymerized ionic liquid column is simple and reliable. This work provides detailed information for designing polymerized ionic liquids, and shows that these materials have great potential extending the range of options for stationary phases in gas chromatography.     

Observation of the nd 1Delta(g) (n = 6, 7, and 8) Rydberg states of Na2 by optical-optical double resonance spectroscopy: L uncoupling and perturbations

The nd (1)Delta(g) (n = 6, 7, and 8) Rydberg states of Na(2) correlating with the asymptotic limits of Na(3s) + Na(nd) have been observed using high-resolution cw optical-optical double resonance spectroscopy corresponding to the rovibrational transitions X (1)Sigma(g)(+)(v("),J(")) + h nu(pump) --> B (1)Pi(u)(v('),J(')) + h nu(probe) --> nd (1)Delta(g)(v,J). Totals of 104, 83, and 45 identified rovibrational e/f-parity levels in the ranges of v = 0-11, 11 < or = J < or = 83; v = 0-10, 11 < or = J < or = 83; and v = 0-10, 11 < or = J < or = 65, have been assigned to the 6d (1)Delta(g), 7d (1)Delta(g), and 8d (1)Delta(g) states, respectively. Using the observed quantum levels, molecular constants were determined from the Dunham fits of the e-parity levels and the Rydberg-Klein-Rees potential curves were constructed for the nd (1)Delta(g)(n = 6-8) states. The characteristics of the estimated Lambda-doubling splitting constants (q(0), q(v), and mu) with n(= 5-8) of the nd (1)Delta(g) series have been explored. Detailed investigations reveal that the nd (1)Delta(g)(n = 6-8) states involve L uncoupling from the internuclear axis and each of these states is affected by an asymmetric perturbation caused by the up and down adjacent states. The rotational-branch intensity and position anomalies in the observed spectra of the nd (1)Delta(g) series (n = 5-8) of Na(2) lead to the conclusion that due to the effects of the L-uncoupling perturbations, the same l complexes approaching the same ion-core limits result in the same l-mixing processes which lead to the formation of the supercomplexes due to the anisotropy of the molecular-ion [Na(2)(+)(3s)] field. This would open up opportunities to study the effects of L uncoupling and perturbations in the nd series and high Rydberg states of other alkali dimers.     

Stimuli‐Responsive Reversible Fluorescence Switching in a Crystalline Donor–Acceptor Mixture Film: Mixed Stack Charge‐Transfer Emission versus Segregated Stack Monomer Emission

We report on a molecularly tailored 1:1 donor–acceptor (D‐A) charge‐transfer (CT) cocrystal that manifests strongly red‐shifted CT luminescence characteristics, as well as noteworthy reconfigurable self‐assembling behaviors. A loosely packed molecular organization is obtained as a consequence of the noncentrosymmetric chemical structure of molecule A1 , which gives rise to considerable free volume and weak intermolecular interactions. The stacking features of the CT complex result in an external stimuli‐responsive molecular stacking reorganization between the mixed and demixed phases of the D‐A pair. Accordingly, high‐contrast fluorescence switching (red?blue) is realized on the basis of the strong alternation of the electronic properties between the mixed and demixed phases. A combination of structural, spectroscopic, and computational studies reveal the underlying mechanism of this stimuli‐responsive behavior.     

Quantitative determination of 15 bioactive triterpenoid saponins in different parts of Acanthopanax henryi by HPLC with charged aerosol detection and confirmation by LC–ESI‐TOF‐MS

Triterpenoid saponins are difficult to analyze using high‐performance liquid chromatography coupled to UV/vis spectrophotometry due to their lack of chromophores. This study describes the first analytical method for the determination of 15 triterpenoid saponins from the leaves, stems, root bark, and fruits of Acanthopanax henryi, using a high‐performance liquid chromatography with charged aerosol detection coupled with electrospray ionization mass spectrometry method. The separation was carried out on a Kinetex XB‐C18 column with an acetonitrile/water gradient as the mobile phase, followed by charged aerosol detection. The operating conditions of charged aerosol detection were set at 24 kPa for nitrogen pressure and 100 pA for the detection range. Liquid chromatography with electrospray ionization mass spectrometry is described for the identification of compounds in plant samples. The electrospray ionization mass spectrometry method involved the use of the [M + Na]⁺ and [M + NH₄]⁺ ions for compounds 1 – 15 in the positive ion mode with an extracted ion chromatogram. The developed method was fully validated in terms of linearity, sensitivity, precision, repeatability, and recovery, then subsequently applied to evaluate the quality of A. henryi.     

Kinetics and mechanism of the aminolysis of aryl ethyl chloro and chlorothio phosphates with anilines

The reactions of ethyl Y-phenyl chloro (1) and chlorothio (2) phosphates with X-anilines in acetonitrile at 55.0 degrees C are studied kinetically and theoretically. Kinetic results yield the primary kinetic isotope effects (k(H)/k(D) = 1.07-1.80 and 1.06-1.27 for 1 and 2, respectively) with deuterated aniline (XC(6)H(4)ND(2)) nucleophiles, and the cross-interaction constants rho(XY) = -0.60 and -0.28 for and , respectively. A concerted mechanism involving a partial frontside attack through a hydrogen-bonded, four-center-type transition state is proposed. The large rho(X) (rho(nuc) = -3.1 to -3.4) and beta(X) (beta(nuc) = 1.1-1.2) values seem to be characteristic of the anilinolysis of phosphates and thiophosphates with the Cl leaving group. Because of the relatively large size of the aniline nucleophile, the degree of steric hindrance could be the decisive factor that determines the direction of the nucleophilic attack to the phosphate and thiophosphate substrates with the relatively small-sized Cl leaving group.     

Capillary electrophoresis–electrochemiluminescence detection method for the analysis of ibandronate in drug formulations and human urine

A simple, rapid and sensitive CE method coupled with electrochemiluminescence (ECL) detection for direct analysis of ibandronate (IBAN) has been developed. Using a buffer solution of 20 mM sodium phosphate (pH 9.0) and a voltage of 13.5 kV, separation of IBAN in a 30‐cm length capillary was achieved in 3 min. ECL detection was performed with an indium tin oxide working electrode bias at 1.6 V (versus a Pt wire reference) in a 200‐mM sodium phosphate buffer (pH 8.0) containing 3.5 mM Ru(bpy)₃²⁺ (where bpy=2,2′‐bipyridyl). Derivatization of IBAN prior to CE‐ECL analysis was not needed. Linear correlation (r=0.9992, n=7) between ECL intensity and analyte concentration was obtained in the range of 0.25–50 μM IBAN. The LOD of IBAN in water was 0.08 μM. The developed method was applied to the analysis of IBAN in a drug formulation and human urine sample. SPE using magnetic Fe₃O₄@Al₂O₃ nanoparticles as the extraction phase was employed to pretreat the urine sample before CE‐ECL analysis. The linear range was 0.2–12.0 μM IBAN in human urine (r=0.9974, n=6). The LOD of IBAN in urine was 0.06 μM. Total analysis time including sample preparation was <1 h.     

Kinetics and mechanism of the anilinolyses of aryl dimethyl, methyl phenyl and diphenyl phosphinates

The reactions of Z-aryl dimethyl (1), methyl phenyl (2), and diphenyl (3) phosphinates with X-anilines in dimethyl sulfoxide at 60.0 °C are studied kinetically. Kinetic results yield the primary normal deuterium kinetic isotope effects (DKIEs) involving deuterated aniline (XC(6)H(4)ND(2)) nucleophiles, k(H)/k(D) = 1.03-1.17, 1.15-1.29, and 1.24-1.51, and the cross-interaction constants (CICs), ρ(XZ) = 0.37, 0.34, and 0.65 for 1, 2, and 3, respectively. The steric effects of the ligands (R(1) and R(2)) on reaction rates play a role, but are relatively much smaller compared to other phosphinate systems. A stepwise mechanism with a rate-limiting leaving group expulsion from the intermediate is proposed on the basis of the CICs positive signs. The dominant frontside nucleophilic attack through a hydrogen-bonded, four-center-type transition state is proposed on the basis of primary normal DKIEs and large magnitudes of the CICs for 2 and 3, while both frontside and backside attack are proposed on the basis of relatively small primary normal DKIEs for 1.     

Differentiation of human labia minora dermis-derived fibroblasts into insulin-producing cells

Recent evidence has suggested that human skin fibroblasts may represent a novel source of therapeutic stem cells. In this study, we report a 3-stage method to induce the differentiation of skin fibroblasts into insulin- producing cells (IPCs). In stage 1, we establish the isolation, expansion and characterization of mesenchymal stem cells from human labia minora dermis- derived fibroblasts (hLMDFs) (stage 1: MSC expansion). hLMDFs express the typical mesenchymal stem cell marker proteins and can differentiate into adipocytes, osteoblasts, chondrocytes or muscle cells. In stage 2, DMEM/F12 serum-free medium with ITS mix (insulin, transferrin, and selenite) is used to induce differentiation of hLMDFs into endoderm-like cells, as determined by the expression of the endoderm markers Sox17, Foxa2, and PDX1 (stage 2: mesenchymal-endoderm transition). In stage 3, cells in the mesenchymal- endoderm transition stage are treated with nicotinamide in order to further differentiate into self-assembled, 3-dimensional islet cell-like clusters that express multiple genes related to pancreatic β-cell development and function (stage 3: IPC). We also found that the transplantation of IPCs can normalize blood glucose levels and rescue glucose homeostasis in streptozotocin- induced diabetic mice. These results indicate that hLMDFs have the capacity to differentiate into functionally competent IPCs and represent a potential cell-based treatment for diabetes mellitus.     

Fabrication and characterization of poly(methyl methacrylate) photopolymer doped with 9,10-phenanthrenequinone (PQ) based derivatives for volume holographic data storage

We present our studies on the photopolymer of poly(methyl methacrylate) (PMMA) doped with 9,10-phenanthrenequinone based derivatives for volume holographic storage. By introducing different functional groups on the side-chain of 9,10-phenanthrenequinone molecule, the holographic characteristics of the material can be modified. The photoreaction involved with the holographic recording in the samples was investigated by measuring UV-Vis absorption spectrum and mass spectrum. The experimental results show that the similar behaviors were exhibited in these photopolymers. It is found that phase hologram recording in our PQ derivatives doped PMMA photopolymer involves a structure change of the quinone based molecule, which induces a strong change of the refractive index. Experimental characterizations on holographic data storage, including material sensitivity, dynamic range (M#) and bit-error-rate have been performed. We found that, by selecting appropriate functional groups, an improvement in sensitivity and M# for holographic data storage can be achieved.     

Grain boundary diffusion of Cu in TiN film by X-ray photoelectron spectroscopy

In this study, the grain boundary diffusion of Cu through a TiN layer with columnar structure was investigated by X-ray photoelectron spectroscopy (XPS). It was observed that Cu atoms diffuse from the Cu layer to the surface along the grain boundaries in the TiN layer at elevated temperature. In order to estimate the grain boundary diffusion constants, we used the surface accumulation method. The diffusivity of Cu through TiN layer with columnar structure from 400 °C to 650 °C is D_b≈6×10⁻¹¹exp(−0.29/(k_BT )) cm²/s. Received: 18 May 1999 / Accepted: 8 September 1999 / Published online: 23 February 2000