Uncertainty Relations Based on Modified Wigner-Yanase-Dyson Skew Information

Uncertainty relation is a core issue in quantum mechanics and quantum information theory. We introduce modified generalized Wigner-Yanase-Dyson (MGWYD) skew information and modified weighted generalized Wigner-Yanase-Dyson (MWGWYD) skew information, and establish new uncertainty relations in terms of the MGWYD skew information and MWGWYD skew information.

     

Heterogeneous copper‐catalyzed oxidative coupling of oxime acetates with sodium sulfinates: An efficient and practical synthesis of β‐keto sulfones

An efficient and practical route to β‐keto sulfones has been developed through heterogeneous oxidative coupling of oxime acetates with sodium sulfinates by using an MCM‐41‐supported Schiff base‐pyridine bidentate copper (II) complex [MCM‐41‐Sb,Py‐Cu (OAc)₂] as the catalyst and oxime acetates as an internal oxidant, followed by hydrolysis. The reaction generates a variety of β‐keto sulfones in good to excellent yields. This new heterogeneous copper (II) catalyst can be easily prepared via a simple procedure from readily available and inexpensive reagents and exhibits the same catalytic activity as Cu (OAc)₂. MCM‐41‐Sb,Py‐Cu (OAc)₂ is also easy to recover and is recyclable up to eight times with almost consistent activity.     

硼掺杂VO2（M）纳米棒的合成、相转变及光学特性

采用V2O5和硼酸为原材料,草酸为还原剂,在水热条件下,成功制备出硼(B)掺杂VO2(B)纳米棒,经Ar气环境退火后,得到了V1-xBxO2(M)系列样品。样品的结构、形貌和相转变温度分别用X-射线粉末衍射(XRD)仪、扫描电子显微镜(SEM)和差示扫描量热仪(DSC)等进行表征。用X-射线光电子谱(XPS)来表征样品的组份和元素的价态,样品的红外光吸收谱也被测量。结果显示,当B掺杂达到2.0at%时,V1-xBxO2(M)相的转变温度升高到75.03℃。这个升高的相转变温度可归因于B3+替代V4+引起VO6八面体的晶格畸变,以及局域晶格电子密度的降低。     

Regulating Phase Junction and Oxygen Vacancies of TiO2 Nanoarrays for Boosted Photoelectrochemical Water Oxidation

In this study, we have provided a facile solution to synthesize well-aligned titanium dioxide nanorods by using hydrothermal reaction. By calcining the materials under different atmospheres and temperatures, a batch of titanium dioxides with excellent oxygen evolution reaction(OER) catalytic efficiency were obtained. This new structured TiO₂ photoanode material yields a high photocurrent density of 5.69 mA/cm² at 1.23 V vs. reversible hydrogen electrode(RHE) under simulated solar light(100 mW/cm²). Surface photovoltage techniques and other measurements were carried out to confirm that the enhanced photoelectrochemical performances were attributed to the synergistic effect of the phase junction and a certain content of surface states, which accelerate the separation and transmission of the photogenerated charges. This material with phase junction and surface states promises a potential application in the field of photoelectric catalysis under solar light.     

Construction and application of an electrochemical sensor based on graphene-MXene nanocomposites for baicalin detectionEI北大核心CSCD

Redox graphene-MXene(rGO-MXene) nanocomposites were prepared by ion polymerization and used to construct a highly sensitive electrochemical sensor for baicalin(BA) detection. The synergistic effect of rGO and MXene increased the specific surface area and electron transport capacity of the electrode, and significantly enhanced the electrochemical response of BA. The cyclic voltammetry and differential pulse voltammetry were used to investigate the electrochemical behavior of BA on the sensor. Under the optimal conditions, the peak current exhibited a good linear relationship with BA concentration in the range of 0. 05-10 μmol / L, and the limit of detection was as low as 28 nmol / L. The method was applied to analyze traditional Chinese medicine preparations containing baicalin, such as Qingkailing Capsule and Sanhuang Tablets with good accuracy and spiked recovery. The results were highly consistent with those of high performance liquid chromatography, providing a technical means for the rapid and sensitive detection of traditional Chinese medicine preparations. © 2022, Youke Publishing Co.,Ltd. All rights reserved.     

Inhibition of cold-welding and adhesive wear occurring on surface of the 6061 aluminum alloy by graphene oxide/polyethylene glycol composite water-based lubricant

In this paper, graphene oxide/polyethylene glycol (GO/PEG) composite water-based lubricant was prepared by an ultrasonic dispersion method, and characterized and analyzed by Fourier transform infrared (FT-IR), Raman spectroscopy, X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and thermogravimetric analysis (TGA). The suspension performance of GO/PEG composite water-based lubricant in water was verified by static sedimentation and centrifugation, and then, the prepared GO/PEG composite water-based lubricant was added into 304 stainless steel and 6061 aluminum alloy, and the coefficient of friction (COF) curve, average COF value, average wear rate, corresponding photomicrographs of balls and disks after wear, and energy-dispersive spectrometer (EDS) elemental analysis were used to illustrate the lubrication effect and lubrication mechanism. The results show that the GO/PEG composite water-based lubricant possesses excellent suspension ability in water, and the average COF value and wear rate of GO/PEG composite water-based lubricant are reduced by 78.8% and 88.8%, respectively, compared with water lubrication. The excellent lubrication effect of GO/PEG composite water-based lubricant can effectively reduce the cold-welding and adhesive wear phenomenon, mainly because GO/PEG composite water-based lubricant first fills the uneven surface of friction mating to form a high-quality lubricating film and then because of the special space structure of GO and the low shear between GO layers and the synergistic lubrication effect of GO/PEG.     

利用相位步进脉冲消除探头13C NMR背景信号

由静态探头线圈外有机材料产生的¹³C NMR背景信号强度大，化学位移范围广（δ_C 20~250），此背景信号在交叉极化实验中还可被增强，并随着样品信号的累积而累积，严重影响谱图分析.将相位步进脉冲引入交叉极化实验（称为PIPCP）中可以有效去除经交叉极化增强的¹³C NMR背景信号，但样品信号不受影响.这是由于经过相位步进脉冲后，线圈外相位严重畸变，而且线圈外锁定场强度急剧降低，来自探头材料的¹³C NMR背景信号无法有效地进行交叉极化.而对于被测样品甘氨酸来说，由于I核和S核之间强烈的偶极耦合作用，所加相位步进脉冲对锁定场强度的影响只有1.4%.     

考虑完全拆分的拣选分批与拣选路径集成优化模型

在电商海量订单背景下,在线订单拣选作业难度加大,因此设计了基于订单完全拆分的拣选分批与拣选路径综合优化模型解决此问题.模型共分两阶段.第一阶段,基于种子算法,设计考虑订单完成度、等待时间与拣选路径的拣选分批模型;第二阶段以拣选单流为单队列,设计多拣选员并行服务的拣选系统.行走策略为基于返回型和遍历型的综合策略,拣选路径优化模型采用模拟退火算法求解.算例分析表明,与传统的不拆分拣选分批模型相比,构建的综合优化模型能够显著提高拣选系统效率.拣选员为4人时,模型能够使总服务时间减少58.79%,订单完成率提高10.09%.