Simulation of three-phase displacement experiments

Three-phase displacement experiments for a water-benzyl alcohol-decane system are simulated. Literature experimental three-phase relative permeabilities for the system are used to describe the relative permeabilities in the three-phase region for different three-phase relative permeability models. Saturation trajectories and elliptical regions are mapped in the three-phase region. Simulations are performed to model displacement experiments including breakthrough and the formation of multiple shocks. The model can be used to predict the results for other displacements. In an experiment where significant gravity segregation is present, the displacement is more accurately modeled by assuming a uniform initial condition than by using the actual vertical saturation and assuming no cross flow. It is shown how different residual saturation values can be measured in the laboratory depending on the initial saturation conditions in the core. The experimental residual saturations can be significantly different than the ‘theoretical’ or model values.     

Solubility and partial molar volume of carbon dioxide and ethane in crosslinked poly(ethylene oxide) copolymer

Experimental solubility and sorptive dilation data are reported for carbon dioxide and ethane in a crosslinked poly(ethylene oxide) (XLPEO) rubbery copolymer. Five different temperatures (253 ≤ T(K) ≤ 308) were considered, with a maximum gas pressure of 2.09 MPa (20.6 atm). The polymer was prepared by photopolymerization of a solution containing 70 wt % poly(ethylene glycol) methyl ether acrylate (PEGMEA) and 30 wt % poly(ethylene glycol) diacrylate (PEGDA). Sorption isotherms were described by the Flory‐Huggins model. For each gas, the Flory‐Huggins interaction parameter was a decreasing function of temperature and did not show a composition dependence. Dilation and sorption data were combined to calculate the partial molar volume (PMV) of the gases in the polymer, which was an increasing function of temperature. Based on a comparison with literature data for a XLPEO homopolymer prepared from pure PEGDA over the same range of operating conditions, an effect of the network composition on both gas solubility and PMV was found. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 456–468, 2010     

A STUDY OF THE PHOTODYNAMIC EFFICIENCIES OF SOME EYE LENS CONSTITUENTS

We have studied the photochemical quantum yields of singlet oxygen production (using the RNO bleaching method) and superoxide production (using the EPR-spin trapping method and the SOD-inhibitable ferricytochrome c reduction spectral assay) of kynurenine (Ky), N-formylkynurenine (NFK), 3-hydroxykynurenine (3HK), kynurenic acid (KUA), and the flavins, riboflavin (RF) and flavin mononucleotide (FMN). Such a study of the photodynamic efficiencies is important since these compounds appear endogenously in the eye. The singlet oxygen quantum yields of the flavins and KUA are high, while Ky and 3HK generate no detectable amounts of singlet oxygen. The superoxide quantum yields of the sensitizers are low compared to their singlet oxygen, and Ky and 3HK produce no detectable amounts of superoxide. The production of the superoxide radical is enhanced in the presence of electron donor molecules such as EDTA and NADH. These results suggest that the production of oxyradicals in the lens may be modulated by the presence of endogenous electron donor molecules such as the coenzymes NADH and NADPH, which are present in significant amounts in some lenses. They also suggest that Ky and 3HK, which are known to be present in aged lenses, might play a protective rather than a deleterious role in the eye.     

Laser Mass Spectrometry of Organophosphorus Pesticides and Related Compounds

Abstract

Laser mass spectra obtained for 20 organophosphorus (OP) compounds were systematically evaluated for groups containing analogous structural features. Variations in fragmentation can be understood based on simple organic reactions. While detailed mechanistic interpretations of the laser mass spectra (LMS) were not possible, the qualitative features in the LMS obtained from five compounds, not in the original set, could be predicted based on the characteristics of the other OP compounds studied. The success of the prediction lends credence to the qualitative models developed for rationalizing the LMS. A specific feature in the LMS of aromatic thionophosphates is a thiono-thiolo rearrangement. Detailed investigation into the phenomena involved comparison of LMS obtained from aromatic thionophosphates with spectra from electron impact, chemical ionization, field desorption, and secondary ion mass spectrometry. These results led to the conclusion that the rearrangement in laser mass spectrometry must occur during volatilization while the molecule/ion is in the “cloud” present immediately above the laser impact area.     

Polymerization (Polycondensation) of Alkanes over Fluosulfonic Acid and Antimony Pentafluoride

Several low molecular weight alkanes have been polymerized (polycondensed) over HSO₃ F-SbF₅ to yield a highly branched oily oligomer with a molecular weight range from the molecular weight of the monomer to around 700. The order of reactivity for butane and lower molecular alkanes is isobutane > n-butane > propane > ethane > methane. The reactivity is explained by the ease of attack of an acid proton derived from the acid on the alkane sigma bonds as well as the relative stability of the resulting cation formed. A cationic mechanism for this reaction is proposed.     

Short-Chain Branching in Polyethylene and Poly(vinyl Chloride) Using Pyrolysis Hydrogenation Gas Chromatography and 13C Nuclear Magnetic Resonance Analysis

This study compares the use of pyrolysis hydrogenation gas chromatography (PHGC) and ¹³C Fourier transform nuclear magnetic resonance (FTNMR) methods for the analysis of reference polyethylene (PE) samples, ethylene-α-olefin copolymers, and specially prepared poly(vinyl chloride) (PVC) samples which were reduced to their PE skeletal structures. The nature and relative quantities of the short branches along the polymer chains were determined using both techniques. Improved high-resolution PHGC data, obtained with a fused silica capillary separation column, gave results which were in satisfactory agreement with the ¹³C FTNMR data. This approach confirms that detailed microstructural information can be obtained with these methods by using carefully controlled experimental conditions and appropriate reference systems.     

Tentative Identification of the Reactive Species in the Reaction of Cp2 TiCl2 with Salts of Diacids

The tentative identification of the reactive species in the condensation of Cp₂ TiCl₂ with salts of diacids to form titanium polysters is made. The reactive species are believed to be the same for both aqueous solution and interfacial systems, i.e., R -CO₂ ^? and Cp₂ Ti²⁺ with reaction occurring in the aqueous phase. The condensation of Cp₂ TiCl₂ with disodium terephthalate in interfacial systems occurs via a pseudo-first-order reaction:

Rate = K[Cp₂ TiCl₂] The rate-determining step (s) is believed to be diffusion of CP₂ TiCl₂ into the aqueous layer and/or hydrolysis of Cp₂ TiCl₂     

Applicability of generic linear scoring mosels in the U.S. credit-union environment

Although credit-scoring models represent a widely used managerialaid for large financial intermediaries, the vast majority ofU.S. credit unions—relatively small cooperatively ownedretail intermediaries, constrained by sample and funding limitations—haveyet to adopt such techniques. Lovie & Lovie (1986) havetheorized that the flat-maximum effect or curve of insensitivityassociated with linear scoring models could be advantageousin areas of applied prediction such as credit scoring. In thiscontext, we reported the relative predictive power of genericcredit-scoring models versus customized models in an earlierpaper (Overstreet et al. 1992). Unfortunately, these findingswere not readily adaptable to the credit-union industry dueto a dated sample with incomplete credit-bureau information.Consequently, from 1988 to 1991, we gathered a refined databasefrom which to further develop and field-test generic scoringmodels in the credit-union environment. The results reportedherein not only confirm, but amplify, the relative predictivepower of such models found earlier. Relative costs and benefitsof generic versus customized models are modelled for a representativecredit union. Future research directions are set forth in theconclusions.