Estimation of L-dopa from Mucuna pruriens LINN and formulations containing M. pruriens by HPTLC method

A selective, precise, and accurate high-performance thin-layer chromatographic (HPTLC) method has been developed for the analysis of L-dopa in Mucuna pruriens seed extract and its formulations. The method involves densitometric evaluation of L-dopa after resolving it by HPTLC on silica gel plates with n-butanol-acetic acid-water (4.0+1.0+1.0, v/v) as the mobile phase. Densitometric analysis of L-dopa was carried out in the absorbance mode at 280 nm. The relationship between the concentration of L-dopa and corresponding peak areas was found to be linear in the range of 100 to 1200 ng/spot. The method was validated for precision (inter and intraday), repeatability, and accuracy. Mean recovery was 100.30%. The relative standard deviation (RSD) values of the precision were found to be in the range 0.64-1.52%. In conclusion, the proposed TLC method was found to be precise, specific and accurate and can be used for identification and quantitative determination of L-dopa in herbal extract and its formulations.     

Stability-Indicating HPTLC Method for Analysis of Moclobemide, and Use of the Method to Study Degradation Kinetics

A sensitive, selective, precise, and stability-indicating HPTLC method for analysis of moclobemide in the bulk drug and in formulations has been established and validated. Aluminium TLC plates precoated with silica gel 60 F₂₅₄ were used with benzene–methanol–40% ammonia 7:3:0.1 (v/v) as mobile phase. Densitometric analysis was performed in absorbance mode at 238 nm. Compact bands were obtained for moclobemide (R _F 0.67 ± 0.02; n = 6). The drug was subjected to acidic and alkaline hydrolysis, oxidation, dry heat treatment, and photodegradation. The drug undergoes degradation under acidic, basic, and oxidising conditions. The degradation products were well resolved from the pure drug with significantly different R _F values, so the method can be regarded as stability-indicating. Response to moclobemide was a linear function of amount in the range 50–600 ng per band, with a correlation coefficient, r ², of 0.9967 ± 0.51. LOD and LOQ, determined experimentally, were 10 and 30 ng per band, respectively. Statistical analysis proves the method is repeatable and specific for analysis of moclobemide. The method was used to investigate the kinetics of alkaline degradation. The Arrhenius plot was constructed and the activation energy calculated.     

Development and validation of a visible absorption densitometry method for quantitation of conessine in Holarrhena antidysenterica (Kurchi)

A selective, precise, and accurate high-performance thin-layer chromatographic (HPTLC) method has been proposed for the analysis of conessine in Holarrhena antidysenterica. The method involves visible densitometric evaluation of conessine resolving it by HPTLC on aluminium-based silica gel plates. For visible densitometric evaluation, peak areas were recorded at 520 nm after the resolved bands were derivatized with Dragendorff's reagent and then sprayed with a 10% solution of aqueous sodium nitrite which resulted in reddish brown color. The correlation between the concentration and area was found to be linear within the range of 10 to 60 ng/spot. The method was validated for precision (interday and intraday), repeatability, and accuracy. Mean recovery for conessine was 98.34-100.25%. The method was applied for the quantitation of conessine in Kurchi. The proposed HPTLC method was found to be precise, specific, sensitive, and accurate and can be used for routine analysis of Kurchi.     

Simultaneous estimation of acetylsalicylic acid and clopidogrel bisulfate in pure powder and tablet formulations by high-performance column liquid chromatography and high-performance thin-layer chromatography

This paper describes validated high-performance column liquid chromatographic (HPLC) and high-performance thin-layer chromatographic (HPTLC) methods for simultaneous estimation of acetylsalicylic acid (ASA) and clopidogrel bisulfate (CLP) in pure powder and formulations. The HPLC separation was achieved on a Nucleosil C8 column (150 mm length x 4.6 mm id, 5 microm particle size) using acetonitrile-phosphate buffer, pH 3.0 (55 + 45, v/v) mobile phase at a flow rate of 1.0 mL/min at ambient temperature. The HPTLC separation was achieved on an aluminum-backed layer of silica gel 60F254 using ethyl acetate-methanol-toluene-glacial acetic acid (5.0 + 1.0 + 4.0 + 0.1, v/v/v/v) mobile phase. Quantitation was achieved with UV detection at 235 nm over the concentration range 4-24 microg/mL for both drugs, with mean recoveries of 99.98 +/- 0.28 and 100.16 +/- 0.66% for ASA and CLP, respectively, using the HPLC method. Quantitation was achieved with UV detection at 235 nm over the concentration range of 400-1400 ng/spot for both drugs, with mean recoveries of 99.93 +/- 0.55 and 100.21 +/- 0.83% for ASA and CLP, respectively, using the HPTLC method. These methods are simple, precise, and sensitive, and they are applicable for the simultaneous determination of ASA and CLP in pure powder and formulations.     

Method development and validation: quantitation of telmisartan bulk drug and its tablet formulation by 1H NMR spectroscopy

The quantitative NMR (qNMR) spectroscopy is nowadays a new tool for the determination of pharmaceutical potent biologically active molecules in bulk drug and its tablet formulation than the other analytical techniques. Herein, qNMR method was developed for an anti‐hypertensive drug, telmisartan in bulk drug and its tablet formulation. The precise method was developed by using malononitrile as an internal standard. The methylene signal of telmisartan appeared at δ = 5.46 ppm (singlet) relative to the signal of malononitrile at δ = 3.59 ppm (singlet) in CDCl₃, as an NMR solvent. The development and validation of the method were carried out as per International Conference on Harmonization guidelines. The method was found to be linear (r² = 0.9999) for 0.5 to 3.5 mg/ml in the drug concentration range. The relative standard deviation for accuracy and precession was not more than 2.0%. The sensitivity of the method was carried out by limit of detection and a limit of quantification, at 0.05 and 0.2 mg/ml, respectively, concentration. The robustness of the method was studied by changing parameters as well as different solvent manufacturer company. The result shows that method was accurately developed for quantification of telmisartan in pharmaceutical dosage form. The developed method by ¹H NMR spectroscopy is comparatively easy and more precise with respect to the other analytical tools. Copyright © 2016 John Wiley & Sons, Ltd.     

Transition from antagonistic to synergistic interaction in mixed micellar system by increase in alkyl chain length of alkyl trimethylammonium bromide

Herein, the electrical conductivity technique used to measure the critical micelle concentration (cmc) for pure cationic surfactants (Dodecyl/cetyltrimethylammonium bromides) and phenothiazine drug (Promethazine hydrochloride), as well as their different mole fractions in 10^?3 ?mol/kg 1-methyl-3-octylimidazolium chloride (C₈mim.Cl) at different temperatures. By using the cmc values the regular solution theory used to evaluate the micellar mole fraction for DTAB/CTAB-PMT mixed systems. The clint's model used to calculate the ideal critical micelle concentration (cmc1) that helps to evaluate the ideal micellar mole fraction for studied mixed systems, both explain the deviation from ideality. In addition, interaction parameter β^m helps to confirm the nature of interaction (either antagonistic or synergistic) for the studied systems. The calculated parameters confirm a transition in the binding nature from antagonistic to synergistic with the increase in alkyl chain length of cationic surfactant i.e., component of the binary mixed system. The ease of micellization for the studied systems discussed by the standard Gibb's energy of micellization ($\Delta G_m^0$), as well as the standard enthalpy and standard entropy of micellization were ($\Delta H_m^0$) and ($\Delta S_m^0$), respectively to discuss the stability of the studied systems.