Immobilization of thiabendazole-specific monoclonal antibodies to silicon substrates via aqueous silanization

Monoclonal antibodies specific for thiabendazole were immobilized to silicon, silicon dioxide, stoichiometric silicon nitride, and silicon-rich silicon nitride surfaces. This work provides the foundation for the development of a homogeneous sensor system for rapid detection and quantification of thiabendazole residues in produce and animal tissue. Immobilization was performed via aqueous silanization of the substrate followed sequentially by treatment with glutaraldehyde and contact with antibody solution in the presence of detergent. Surfaces were challenged with thiabendazole-horseradish peroxidase conjugate in an ELISA format to estimate immobilized antibody load. A stable and reproducible surface loading of 2 x 10¹¹ antibodies/cm² was obtained only after surfaces received postimmobilization treatments to remove nonspecifically adsorbed antibody. No difference in surface loading was noted when using 30% hydrogen peroxide rather than nitric acid for silanol activation. Little difference was noted among the antibody loadings achieved on the various silicon substrates. Bound antigen-enzyme conjugate was eluted with 0.1N acetic acid and reproducible surface activity was measured for up to four consecutive antigen challenges. Immobilized antibody surfaces were stabilized with 2% sucrose, dehydrated at 37‡C and stored in vacuum or stored at 4‡C in phosphate buffered saline containing 0.01% sodium azide without significant loss of activity.     

Current Trend in Synthesis,Post‐Synthetic Modifications and Biological Applications of Nanometal‐Organic Frameworks (NMOFs)

Since the early reports of MOFs and their interesting properties, research involving these materials has grown wide in scope and applications. Various synthetic approaches have ensued in view of obtaining materials with optimised properties, the extensive scope of application spanning from energy, gas sorption, catalysis biological applications has meant exponentially evolved over the years. The far‐reaching synthetic and PSM approaches and porosity control possibilities have continued to serve as a motivation for research on these materials. With respect to the biological applications, MOFs have shown promise as good candidates in applications involving drug delivery, BioMOFs, sensing, imaging amongst others. Despite being a while away from successful entry into the market, observed results in sensing, drug delivery, and imaging put these materials on the spot light as candidates poised to usher in a revolution in biology. In this regard, this review article focuses current approaches in synthesis, post functionalization and biological applications of these materials with particular attention on drug delivery, imaging, sensing and BioMOFs.     

Gas chromatographic trace analysis of underivatized nitrophenols

Summary A method for the gas chromatographic trace analysis of underivatized nitrophenols in ground-water is presented. Using a highly de-activated separation system a satisfactory precision for their quantitative GC analysis could be achieved by avoiding condensation of the solvent and by fast injection of the sample. The reproducibility of the peak areas of eleven nitrophenols in ethylacetate was <5 % RSD. Using a nitrogen-phosphorus detector detection limits were in a range from 10 to 30 pg. Within the concentration range from 0.1 to 10 ng μl⁻¹ the calibrations were linear with correlation coefficients >0.992. The approach described was applied to the analysis of nitrophenols in ground-water near a former ammunition plant, after preconcentration by continuous liquid/liquid extraction with ethylacetate. Using a GC-MS technique and retention times various nitrophenols were identified and then quantified in the μg/L-range by applying NPD.     

Enolization of acetone in superheated water detected via radical formation

Muoniated free radicals have been detected in muon-irradiated aqueous solutions of acetone at high temperatures and pressures. At temperatures below 250 degrees C, the radical product is consistent with muonium addition to the keto form of acetone. However, at higher temperatures, a different radical was detected, which is attributed to muonium addition to the enol form. Muon hyperfine coupling constants have been determined for both radicals over a wide range of temperatures, significantly extending the range of conditions under which these radicals and the keto-enol equilibrium have been studied.     

35Cl Nqr spectroscopy of the [PO2Cl2]− and POCl3 groups in Me(PO2Cl2)2·2D (Me = Mg,Ca, Mn; D = POCl3,CH3COOC2H5,CH3COCH3)

³⁵Cl NQR spectra of dichlorophosphates Me(PO₂Cl₂)₂ · 2D (Me = Mg, Ca, Mn; D = CH₃COOC₂H₅, CH₃COCH₃, POCl₃) are studied in the temperature range 77 ? T (K) ? 305. It is shown that the three compounds with CH₃COOC₂H₅ as donor are isomorphic at 77 K, the crystal structure of Mn(PO₂Cl₂)₂· 2CH₃COOC₂H₅. The structure of Mg(PO₂Cl₂)_2^?· 2CH₃COCH₃ and of Mg(PO₂Cl₂)₂ · 2POCl₃ probably consists of infinite chains as found for Mn(PO₂Cl₂)₂· 2CH₃COOC₂H₅. Mg(PO₂Cl₂)₂· 2CH₃COOC₂H₅ shows phase transformations and a complicated dynamical behaviour leading to strong deviations from a Bayertype NQR function v = f(T). The donor capacity of POCl₃ in Mg(PO₂Cl₂)₂· 2POCl₃ is comparable with the donor strength in AsCl₃ · POCl₃ · A d_π-p_π overlap of the P-O bond influences the P-Cl bond.     

A definitive investigation of the reaction of cyclopentadiene with cis-3,4-dichlorocyclobutene: A literature correction

Structural assignments are made to the three adducts derived from the title reaction. ¹H-n.m.r., ¹³C-n.m.r. and euroshift data are used to support the new structures.     

Molybdenum-catalyzed episulfidation of (E)-cycloalkenes with elemental sulfur

Episulfidation of (E)-cyclooctene and (E)-cyclononene was achieved with elemental sulfur by using a catalytic amount of a molybdenum oxo complex.     

Spectroscopic properties of Carcinus aestuarii hemocyanin and its structural subunits

Hemocyanin (Hc) of Carcinus aestuarii contains three major and one minor electrophoretically separable polypeptide chains which were purified by fast protein liquid chromatography (FPLC) ion exchange chromatography. N-terminal amino acid sequences of four structural subunits (SSs) from C. aestuarii were compared with known N-terminal sequences from other arthropodan hemocyanins. The conformational changes, induced by various treatments, were monitored by far UV, CD and fluorescence spectroscopy. The critical temperatures for the structural subunits, Tc, determined by fluorescence spectroscopy, are in the region of 52-59 degrees C and coincide with the melting temperatures, Tm (49-55 degrees C), determined by CD spectroscopy. The free energy of stabilization in water, delta GDH2O, toward guanidinium hydrochloride is about 1.3 times higher for the dodecameric Hc as compared to the isolated subunits and about one time higher for Cal, comparing with other SSs. The studies reveal that the conformational stability of the native dodecamer towards various denaturants (temperature and guanidinium hydrochloride) indicate that the quaternary structure is stabilized by oligomerization between structural subunits, and the possibility of a structural role of the sugar mojeties cannot be excluded.