A computerised, unbiased method for epithelial measurement

OBJECTIVE: To develop and evaluate a standardised method for unbiased measurements of epithelial thickness taking the variability of the dermal papillae in consideration. METHODS: A computer-assisted measurement program suitable for haematoxylin and eosin routine stained specimens has been developed. RESULTS: The developed program was designed to measure four different distance parameters, taking the number, height and width of dermal papillae into account. The measurement program gave very accurate results compared with manual measurements. The measurement results can be presented as tables or star graphs, and the results can be further processed by multivariate analysis. CONCLUSION: The computer-assisted measurement program is considered to be a valuable and reliable tool for measurements of epithelial thickness, irrespectively of the variability of the epithelial morphology. Since length, size and number of the papillae may change with certain pathological conditions, age and also under hormonal influence, this method can be a helpful diagnostic tool.     

Symmetric halogen bonding is preferred in solution

Halogen bonding is a recently rediscovered secondary interaction that shows potential to become a complementary molecular tool to hydrogen bonding in rational drug design and in material sciences. Whereas hydrogen bond symmetry has been the subject of systematic studies for decades, the understanding of the analogous three-center halogen bonds is yet in its infancy. The isotopic perturbation of equilibrium (IPE) technique with (13)C NMR detection was applied to regioselectively deuterated pyridine complexes to investigate the symmetry of [N-I-N](+) and [N-Br-N](+) halogen bonding in solution. Preference for a symmetric arrangement was observed for both a freely adjustable and for a conformationally restricted [N-X-N](+) model system, as also confirmed by computation on the DFT level. A closely attached counterion is shown to be compatible with the preferred symmetric arrangement. The experimental observations and computational predictions reveal a high energetic gain upon formation of symmetric, three-center four-electron halogen bonding. Whereas hydrogen bonds are generally asymmetric in solution and symmetric in the crystalline state, the analogous bromine and iodine centered halogen bonds prefer symmetric arrangement in solution.     

Methodology for determination of 89Sr and 90Sr in radiological emergency: I. Scenario dependent evaluation of potentially interfering radionuclides

Early determination of ⁸⁹Sr and ⁹⁰Sr in radiological emergency is hampered by the presence of interfering short-lived fission products. In this study, three commonly used radioanalytical strategies for ⁸⁹Sr and ⁹⁰Sr were evaluated theoretically considering their suitability in a nuclear explosion scenario. The methods were evaluated with respect to the need for decay time of interfering short-lived strontium and yttrium isotopes, and reduction of other known interfering nuclides prior to measurement. The strategy shown to be most successful included initial separation of strontium and determination of ⁸⁹Sr, followed by an yttrium separation and counting of ⁹⁰Y. ⁸⁹Sr and ⁹⁰Sr could be determined about 5 and 9 days after a nuclear explosion, respectively.     

Conformational Flexibility and Dynamics of Two (1→6)‐Linked Disaccharides Related to an Oligosaccharide Epitope Expressed on Malignant Tumour Cells

The conformational flexibility and dynamics of two (1→6)‐linked disaccharides that are related to the action of the glycosyl transferase GnT‐V have been investigated. NMR NOE and T‐ROE spectroscopy experiments, conformation‐dependent coupling constants and molecular dynamics (MD) simulations were used in the analyses. To facilitate these studies, the compounds were synthesised as α‐d‐ [6‐¹³C]‐Manp‐OMe derivatives, which reduced the ¹H NMR spectral overlap and facilitated the determination of two‐ and three‐bond ¹H,¹H, ¹H,¹³C and ¹³C,¹³C‐coupling constants. The population distribution for the glycosidic ω torsion angle in α‐d‐ Manp‐(1→6)‐α‐d‐ Manp‐OMe for gt/gg/tg was equal to 45:50:5, whereas in α‐d‐ Manp‐OMe it was determined to be 56:36:8. The dynamic model that was generated for β‐d‐ GlcpNAc‐(1→6)‐α‐d‐ Manp‐OMe by MD simulations employing the PARM22/SU01 CHARMM‐based force field was in very good agreement with experimental observations. β‐d‐ GlcpNAc‐(1→6)‐α‐d‐ Manp‐OMe is described by an equilibrium of populated states in which the ? torsion angle has the exo‐anomeric conformation, the ψ torsion angle an extended antiperiplanar conformation and the ω torsion angle a distribution of populations predominantly between the gauche–trans and the gauche–gauche conformational states (i.e., gt/gg/tg) is equal to 60:35:5, respectively. The use of site‐specific ¹³C labelling in these disaccharides leads to increased spectral dispersion, thereby making NMR spectroscopy based conformational analysis possible that otherwise might be difficult to attain.     

Dynamic field sampling of airborne organophosphate triesters using solid-phase microextraction under equilibrium and non-equilibrium conditions

A simple setup for dynamic air sampling using a solid-phase microextraction (SPME) device designed for use in the field was evaluated for organophosphate triester vapour under both equilibrium and non-equilibrium conditions. The effects of varying the applied airflows in the sampling device were evaluated in order to optimise the system with respect to the Reynolds number and magnitude of the boundary layer that developed near the surface. Further, the storage stability of the analytes was studied for both capped and uncapped 100-microm PDMS fibres. Organophosphate triesters are utilized on large scales as flame-retardants and/or plasticizers, for instance in upholstered furniture. In indoor working environments these compounds have become common components in the surrounding air. Measurements were performed in a recently furnished working environment and the concentration of tris(2-choropropyl) phosphate was found to be 7 microg m(-3).     

Evaluation of solid-phase microextraction with PDMS for air sampling of gaseous organophosphate flame-retardants and plasticizers

As an inexpensive, simple, and low-solvent consuming extraction technique, the suitability of solid-phase microextraction (SPME) with polydimethylsiloxane (PDMS) sorbent was investigated as a quantitative method for sampling gaseous organophosphate triesters in air. These compounds have become ubiquitous in indoor air, because of their widespread use as additive flame retardants/plasticizers in various indoor materials. Results obtained by sampling these compounds at controlled air concentrations using SPME and active sampling on glass fibre filters were compared to evaluate the method. A constant linear airflow of 10 cm s^–1 over the fibres was applied to increase the extraction rate. For extraction of triethyl phosphate with a 100-m PDMS fibre, equilibrium was achieved after 8 h. The limit of detection was determined to be less than 10 pg m^–3. The PDMS–air partition coefficients, K_fs, for the individual organophosphate triesters were determined to be in the range 5–60×10⁶ at room temperature (22–23°C). Air measurements were performed utilising the determined coefficients for quantification. In samples taken from a lecture room four different airborne organophosphate esters were identified, the most abundant of which was tris(chloropropyl) phosphate, at the comparatively high level of 1.1 g m^–3. The results from SPME and active sampling had comparable repeatability (RSD less than 17%), and the determined concentrations were also similar. The results suggest that the investigated compounds were almost entirely associated with the gaseous phase at the time and place sampled.     

Coupled LC-GC-MS for on-line clean-up,separation, and identification of chlorinated polycyclic aromatic hydrocarbons at picogram levels in urban air

Coupled liquid chromatography – gas chromatography – mass spectrometry (LC-GC-MS) has been applied for on-line clean up, separation, and identification of chlorinated polycyclic aromatic hydrocarbons (CI-PAHs). A loop-type interface was used to couple the liquid chromatograph on-line with the GC-MS, and concurrent solvent evaporation was used for sample transfer. A back-flush technique was used in conjunction with a two-dimensional column system for isolation of CI-PAHs and polycyclic aromatic hydrocarbons (PAHs). This fraction was transferred on-line to the GC and separated on a capillary column. Selective and sensitive detection of CI-PAHs in the GC eluate was obtained by negative ion chemical ionization (NICI) mass spectrometry and selected ion monitoring (SIM). The combined on-line system for isolation, separation, and identification showed high precision and accuracy, and demonstrated a linear response from 1 to 1000 pg for chlorinated PAHs. The estimated detection limit was 250 fg for 1-chloropyrene and 1,6-dichloropyrene. The technique was demonstrated by analysis of urban air samples. The low detection limit made it possible to use the technique for analysis of personally carried monitoring equipment for measurement of exposure to CI-PAHs in the work environment.     

Spruce Bark-Extracted Lignin and Tannin-Based Bioresin-Adhesives: Effect of Curing Temperatures on the Thermal Properties of the Resins

In this study, formaldehyde-free bioresin adhesives were synthesised from lignin and tannin, which were obtained from softwood bark. The extraction was done via organosolv treatment and hot water extraction, respectively. A non-volatile, non-toxic aldehyde, glyoxal, was used as a substitute for formaldehyde in order to modify the chemical structure of both the lignin and tannin. The glyoxal modification reaction was confirmed by ATR–FTIR spectroscopy. Three different resin formulations were prepared using modified lignin along with the modified tannin. The thermal properties of the modified lignin, tannin, and the bioresins were assessed by DSC and TGA. When the bioresins were cured at a high temperature (200 °C) by compression moulding, they exhibited higher thermal stability as well as an enhanced degree of cross-linking compared to the low temperature-cured bioresins. The thermal properties of the resins were strongly affected by the compositions of the resins as well as the curing temperatures.