The role of matching thickness on the wideband electromagnetic wave suppresser using single layer doped barium ferrite

The effect of Mg²⁺, Co²⁺and Ti⁴⁺ substitution on microwave absorption has been studied for BaMg_0.5Co_0.5Ti_1.0Fe₁₀O₁₉ ferrite-acrylic resin composite in frequency range from 13 to 20 GHz. X-ray diffraction (XRD), scanning electron microscopy (SEM), vector network analysis and vibrating sample magnetometry (VSM) were employed to analyze structure, electromagnetic and microwave absorption properties of prepared ferrite. The obtained results of reflectivity demonstrate that by varying matching thickness along with weight percentage of ferrite to acrylic resin, the bandwidth coupled with reflection loss values of prepared composites can be easily tuned. Based on microwave measurement on reflectivity, it is found that BaMg_0.5Co_0.5Ti_1.0Fe₁₀O₁₉ is a good candidate for wideband electromagnetic compatibility and other practical applications at high frequency.     

On Naked Black Holes

The recently proposed criteria for naked blackholes are conveniently rephrased. It is shown that twosolutions of dilaton-Maxwell gravity, satisfying weakenergy conditions, represent naked blackholes.     

Stability-Indicating Densitometric HPTLC Method for Qualitative and Quantitative Analysis of Hydroquinone in Commercial Whitening Creams

JPC – Journal of Planar Chromatography – Modern TLC - A densitometric high-performance thin-layer chromatographic (HPTLC) method for analysis of hydroquinone has been developed and...     

The size and number of local free volumes in polypropylenes: A positron lifetime and PVT study

The temperature dependence of the mean size of local free volumes in an amorphous atactic (aPP) and a semicrystalline syndiotactic polypropylene (sPP), and an amorphous ethylene‐propylene copolymer (E‐co‐P48) has been studied. Pressure‐volume‐temperature (PVT) experiments were performed for aPP, from which the hole fraction h of the Simha‐Somcynsky theory and the number density of holes were estimated. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 3089–3093, 2003     

Photochemical tuning of the helical structure of cholesteric liquid crystals by photoisomerization of chiral azobenzenes, and their structural effects

Several chiral azobenzene compounds having different chiral substituents were synthesized. A cholesteric phase was induced by mixing each chiral azobenzene compound with a host non-chiral nematic liquid crystal (E44). The helical twisting power (HTP) as well as the change in HTP by trans-cis photoisomerization of the chiral azobenzene compound was dependent on the structure of the chiral substituents. A compensated nematic phase was induced by combination of E44, a chiral azobenzene compound and a non-photochromic chiral compound. Reversible switching between the compensated nematic phase and cholesteric phase was brought about by trans-cis photoisomerization of the chiral azobenzene compound in the liquid crystalline systems. An azobenzene compound substituted with a menthyl group showed the highest efficiency as the trigger for the switching; this efficiency was related to the compactness of the chiral group substituted within the azobenzene core moiety.     

Four-operand parallel optical computing using shadow-casting technique

Optical shadow-casting (OSC) technique has shown excellent potential for optically implementing two-operand parallel logic gates and array logic operations. The 16 logic functions for two binary patterns (variables) are optically realizable in parallel by properly configuring an array of 2×2 light emitting diodes. In this paper, we propose an enhanced OSC technique for implementing four-operand parallel logic gates. The proposed system is capable of performing 2¹⁶ logic functions by simply programming the switching mode of an array of 4×4 light emitting diodes in the input plane. This leads to an efficient and compact realization scheme when compared to the conventional two-operand OSC system.     

Synthesis and Characterization of Organosilicon Substituted Fluorenyl Derivatives

Friedel‐Crafts cycloalkylation of biphenyl with 2,3‐dichlorobutyltrichlorosilane(Cl₃Si‐CH₂CHClCHClCH₃) at a temperature of 100°C in the presence of anhydrous aluminum chloride catalyst gave cyclized product, 9‐methyl‐9‐(2‐trichlorosilylethyl)fluorene 1a , in 33% yield. Methylation of 1a with nucleophilic reagent such as methyl magnesium chloride, gave 9‐methyl‐9‐(2‐trimethylsilylethyl)fluorene 2 while bromination of 2 with excess amount of bromine in DMF resulted in 2,7‐dibromo‐9‐methyl‐9‐(2‐trichlorosilyl)fluorene 3 in good yield. All the compounds were structurally identified by GC/MS, ¹H and ¹³C‐NMR spectroscopy.     

Effect of Manganese on Radiation Vulcanization of Natural Rubber

Manganese was added as a promoter to investigate physico-mechanical properties of radiation-vulcanized natural rubber latex (RVNRL) films. RVNRL films were prepared by the addition of Mn with the concentration range 0–30 ppm to natural rubber latex and irradiated with various radiation doses (0–20 kGy). Tensile strength, tear strength, and cross-linking density of the irradiated rubber films increased with increasing the concentration of Mn ions as well as radiation doses. In contrast, elongation at break, permanent set, and swelling ratio of the films were decreased under the same conditions. The concentration of Mn ions and radiation doses were optimized and found to be 20 ppm and 12 kGy, respectively. The maximum tensile and tear strengths of irradiated rubber films were observed as 29.12 MPa and 44.78 N/mm, respectively at the optimum conditions. The mechanical properties of the films increased markedly with the addition of Mn until they attained the highest values of 33.88 MPa and 54.77 N/mm, respectively. These enhancements, which reached approximately 20% at the most favorable conditions, can be explained by the effect of transition metals in view of Fajan’s rules regarding the covalent character of ionic bonds and suggest that the higher the difference in charges between cation and anion, the higher the ability to form distortion or polarization of ions.     

Gamma-Irradiated Gelatin-Based Films Modified by HEMA for Medical Application

The present article describes the synthesis and characterization of bi-component polymer systems based on gelatin films incorporated with 2-hydroxyethyl methacrylate (HEMA) monomer, developed for medical application. Gelatin films were prepared by the addition of HEMA of different concentrations (0–30 wt.%) and irradiated with various radiation doses (0–5 kGy). Tensile strength and tear strength of the irradiated gelatin films were found to increase with increasing HEMA up to 20 wt.% as well as radiation doses (1 kGy) as optimized. The maximum tensile and tear strengths of irradiated gelatin films with HEMA were found to be 79.1 MPa and 83.2 N/mm, respectively, at the optimum conditions, and these values were about double that of a reference film prepared without additives. In addition, morphological analysis was done by scanning electron microscopy (SEM) and showed how HEMA cemented and was covered with gelatin in the blend. Thermomechanical analysis was carried out to investigate the shifting of glass transition temperature (T_g) towards higher temperature due to HEMA addition, and the effect of this film was tested on the human body in order to determine whether it can be applied for medical purposes.     

Structure activity relationship of bergenin,p-hydroxybenzoyl bergenin, 11-O-galloylbergenin as potent antioxidant and urease inhibitor isolated from Bergenia ligulata

Ethanol extract of the aerial parts of Bergenia ligulata was subjected to solvent–solvent separation followed by various chromatographic techniques that lead to isolation of bergenine (1), p-hydroxybenzoyl bergenin (2), 11-O-galloylbergenin (3) and methyl gallate (4) as major constituents. Ethyl acetate fraction showed a dose-dependent urease inhibitory pattern with IC₅₀ value of 54μg/mL. Structures of compounds 1 and 3 were established by XRD and 2, 4 by NMR. All these compounds were subjected to DPPH scavenging activity, reducing power assay and urease inhibitory activity. The EC₅₀ 7.45 ± 0.2 μg/mL and 5.39 ± 0.28 μg/mL values in terms of antioxidant and reducing power, respectively, were less for 3. Compounds 1–3 showed moderate to significant urease inhibitory potential with IC₅₀ 57.1 ± 0.7, IC₅₀ 48.4 ± 0.3 and 38.6 ± 1.5. Antioxidant activities and urease inhibitory potential were investigated and compound 3 was found to be the most active.