Thermal phase transition of RbMnFe(CN)6 observed by X-ray emission and absorption spectroscopy

The thermal phase transition of RbMnFe(CN)₆ has been observed by Mn and Fe 3p-1s X-ray emission spectroscopy (XES) and 1s X-ray absorption spectroscopy (XAS). The thermal variations of the spin states and the valences of Mn and Fe were determined to be Mn²⁺(S=5/2)-NC-Fe³⁺(S=1/2) for the high-temperature (HT) phase and Mn³⁺(S=2)-NC-Fe²⁺(S=0) for the low-temperature (LT) phase. These transitions are thus caused by charge transfer between Mn and Fe. The temperature dependences of Mn and Fe 3p-1s XES and 1s XAS were observed as the composition of the spectra of the HT and LT phases. The ratios of the HT component in each spectrum show good agreement with the thermal transition curves observed with magnetic susceptibility measurements.     

Hexagon versus trimer formation in in nanowires on Si(111): energetics and quantum conductance

The structural and electronic properties of the quasi-one-dimensional In/Si(111) surface system are calculated from first principles. It is found that the symmetry lowering of the In chains is energetically favorable, provided neighboring nanowires are correlated, giving rise to a doubling of the surface unit cell both along and perpendicular to the chain direction. The recently suggested formation of hexagons within the In nanowires [C. González, F. Flores, and J. Ortega, Phys. Rev. Lett. 96, 136101 (2006)]--in clear contrast to the trimer formation proposed earlier-drastically modifies the electron transport along the In chains, in agreement with experiment.     

Stabilization of H3 + in the high pressure crystalline structure of HnCl (n = 2–7)

The particle-swarm optimization method has been used to predict the stable high pressure structures up to 300 GPa of hydrogen-rich group 17 chlorine (H_nCl, n = 2–7) compounds. In comparison to the group 1 and 2 hydrides, the structural modification associated with increasing pressure and hydrogen concentration is much less dramatic. The polymeric HCl chains already present in the low temperature phase under ambient pressure persist in all the high pressure structures. No transfer of electrons from the chlorine atoms into the interstitial sites is found. This indicates the chemical bonding at high pressure in group 17 elements is fundamentally different from the alkali and alkaline elements. It is found that almost perfectly triangular H₃ ⁺ ions can be stabilized in the crystalline structure of H₅Cl.     

One‐Step Borylation of 1,3‐Diaryloxybenzenes Towards Efficient Materials for Organic Light‐Emitting Diodes

The development of a one‐step borylation of 1,3‐diaryloxybenzenes, yielding novel boron‐containing polycyclic aromatic compounds, is reported. The resulting boron‐containing compounds possess high singlet‐triplet excitation energies as a result of localized frontier molecular orbitals induced by boron and oxygen. Using these compounds as a host material, we successfully prepared phosphorescent organic light‐emitting diodes exhibiting high efficiency and adequate lifetimes. Moreover, using the present one‐step borylation, we succeeded in the synthesis of an efficient, thermally activated delayed fluorescence emitter and boron‐fused benzo[6]helicene.     

Production of secondary drops during the single water drop impact onto a plane water surface

The normal impact of single water drops onto a plane water surface was studied experimentally to reveal the amount of secondary drops produced from the rim of crown-like interfacial structure. Within the experimental ranges tested, the ratio of the total mass of secondary drops to the mass of primary drop was approximately within 0–1 and correlated well as the function of dimensionless parameter K that consisted of the impact Weber number We and the Ohnesorge number Oh (K = We Oh ^−0.4). The dependences of the number and the mean diameter of secondary drops on K and dimensionless film thickness were also investigated.     

Dinuclear macrocyclic palladium complexes having pincer coordinating groups and their catalytic properties in Mizoroki-Heck reactions

An improved synthetic method of palladium(II) dinuclear macrocyclic complexes have been described. Each of the two isomers of the complexes [Pd₂LBr₂] has a macrocyclic ligand L in which two 2,6-bis(diaminomethyl)phenyl units coordinate to the Pd(II) centers with N, C, N donor atoms. Substitution of the bromo ligands of one of the isomer of the complexes with acetonitrile ligands affords a new dinuclear complex. Catalytic activities of these complexes were studied for the Mizoroki-Heck type reactions of iodobenzene and styrene. High turnover number up to 30,000 was achieved using one of the isomer of the complexes.     

Synthesis of tri- or tetrasubstituted pyrimidine derivatives through the [5+1] annulation of enamidines with either N,N-dimethylformamide dialkyl acetals or orthoesters and their application in a ring transformation of pyrimidines to pyrido[2,3-d]pyrimidin-5-one derivatives

The [5+1] annulation of enamidines, which were prepared from functionalized silanes, organolithium compounds and two nitriles, with N,N-dimethylformamide dialkyl acetals as the C1 unit is described, leading to the synthesis of tri- and tetrasubstituted pyrimidine derivatives under catalyst- and solvent-free reaction conditions. Furthermore, the [5+1] annulation of enamidines by using orthoesters as the C1 unit is described, in which catalytic amounts of ZnBr(2) catalyze the annulation to produce polysubstituted pyrimidines under toluene or xylene reflux conditions. Moreover, the combination of a reductive ring-opening reaction with [Mo(CO)(6)] and a subsequent intramolecular cyclization with tBuOK effectively causes a skeletal transformation from the pyrimidines containing an isoxazolyl and an ethoxy substituent to form pyrido[2,3-d]pyrimidin-5-one frameworks in excellent yield.     

Single-molecule force spectroscopy for studying kinetics of enzymatic dextran elongations

Catalytic elongation of dextran by a single molecule of dextransucrase (DSase) was directly monitored by observing the movements of the positions of a rupture peak, which represented the adhesive force between an isomaltoheptaose (dextran 7-mer)-immobilized probe and a DSase-immobilized mica surface. This was initiated with the addition of sucrose monomers. From the histograms of the rupture peaks after elongation reactions on each individual enzyme and the continuous peak shift of certain single enzymes, the catalytic elongation rate constant (k(cat)) was ascertained to be 1.2-2.7 s(-1).     

First-principles study of liquid gallium at ambient and high pressure

The static and dynamic properties of liquid Ga close to the melting line have been studied by first-principles molecular dynamics simulations at ambient and elevated pressure up to 5.8 GPa. Below 2.5 GPa, the nearest neighbor Ga-Ga separation shows little change, while the second and third coordination shells are compressed to shorter distances. This behavior is attributed to the gradual occupation of the interstitial sites. Detail analysis of the local geometry and dynamical behavior refutes the proposed existence of Ga(2) dimers in the liquid state. In fact, both the structure and electronic properties of the liquid are found to closely resemble that of the underlying Ga-II and Ga-III crystalline phases.     

1-Alkynyl- and 1-alkenyl-3-arylimidazo[1,5-a]pyridines: synthesis, photophysical properties, and observation of a linear correlation between the fluorescent wavelength and Hammett substituent constants

1-Alkynyl- and 1-alkenyl-3-arylimidazo[1,5-a]pyridines were synthesized. The Sonogashira coupling of 3-aryl-1-iodoimidazo[1,5-a]pyridines and various terminal alkynes with Pd(PPh(3))(2)Cl(2) (10 mol %) and CuI (10 mol %) in triethylamine at 80 °C for 12 h afforded the corresponding 1-alkenyl-3-arylimidazo[1,5-a]pyridines in good to excellent yields. The Mizoroki-Heck reaction of 3-aryl-1-iodoimidazo[1,5-a]pyridines and various styrene derivatives proceeded smoothly with Pd(OAc)(2) (5 mol %), IMes·HCl (10 mol %), and Cs(2)CO(3) (2 equiv) in DMA at 130 °C for 20 h to give the alkenylated imidazo[1,5-a]pyridines in moderate to high yields. The fluorescence maxima and fluorescence quantum yields of the alkynylated products were 458-560 nm and Φ(F) = 0.08-0.26 in chloroform solution, and those of the alkenylated imidazopyridines were 479-537 nm and Φ(F) = 0.03-0.13. The absorption behaviors of the obtained alkynylated and alkenylated imidazo[1,5-a]pyridines showed a good fit to the values predicted by TDDFT calculations at the B3LYP/6-311++G(d,p) level. In addition, the alkynylated imidazo[1,5-a]pyridines obtained showed linear correlations between the Hammett substituent constants of the substituents on the arylalkynyl group and their fluorescence wavelengths.