Capillary electrophoresis as an alternative to HPLC for determination of honey flavonoids

Summary The general objective is to provide an alternative methodology based on capillary electrophoresis (CE) to characterize flavonoids from honey and hence determine its botanical origin. The specific objective is to compare the separation of flavonoids by CE with those achieved by HPLC to assess CE as an alternative technique for the determination of honey flavonoids. Fourteen different flavonoids isolated from honey were analysed by MECC and compared to the HPLC separations. It was difficult to find specific experimental conditions to separate all the flavonoids from honey in a single MEKC run. Three chromatographic conditions are optimized and, depending on the flavonoid markers sought in honey, the appropriate detection method should be chosen. Compared to the HPLC results, it is clear that CE could be an alternative technique in honey flavonoids analysis and particularly in the study of its geographical and floral origin.     

Effect of included guest molecules on the normal state conductivity and superconductivity of beta''-(ET)(4)[(H(3)O)Ga(C(2)O(4))(3)].G (G = pyridine,nitrobenzene)

Normal state conductivity and superconductivity together with bulk magnetic susceptibility and magnetization measurements have been measured for two molecular charge-transfer salts: beta' '-(ET)4[(H3O)Ga(C2O4)3]G (ET = bis(ethylenedithio)tetrathiafulvalene, G = pyridine for compound I and nitrobenzene for compound II). With the exception of the included guest molecules (G) the crystal structures are almost identical. Both show minima in their electrical transport at 130 K for I and at 160 K for II, but at lower temperatures their behaviors differ markedly. The resistance of I reaches a maximum at 50 K with a further small peak at 2 K and possible superconductivity only below 2 K, whereas that of II increases continuously down to 7.5 K, where an abrupt transition to a superconducting state occurs.     

Stereoselectivity in the collision-activated reactions of gas phase salt complexes

The collision-activated dissociations (CAD) of gas phase salt complexes composed of chiral ions were studied in a quadrupole ion trap mass spectrometer. Because both partners in the salt are chiral, diastereomeric complexes can be formed (e.g., RR, RS). Two general types of complexes were investigated. In the first, the complex was composed of deprotonated binaphthol and a chiral bis-tetraalkylammonium dication. CAD of these complexes leads to the transfer of a proton or an alkyl cation to the binaphtholate leading to a singly-charged tetraalkylammonium cation. During CAD, diastereomeric complexes give significantly different product distributions indicating reasonable stereoselectivity in the process. In the second system, the complexes involved a peptide dianion and a chiral tetraalkylammonium cation. These systems may be viewed as very simple models for the interactions of peptides/proteins with small chiral molecules. Again, stereoselectivity was evident during CAD, but the extent was dependent on the nature of the peptide and not observable in some cases. To better understand the structural features needed to achieve stereoselectivity in gas phase salt complexes, representative transition states were modeled computationally. The results suggest that it is critical for the asymmetry of the nucleophile (i.e., anion) to be well represented in the vicinity of its reactive center.     

Applications of benzotriazole methodology in heterocycle ring synthesis and substituent introduction and modification

Applications of benzotriazole methodology for the preparation of heterocyclic compounds are reviewed. The characteristic advantages of benzotriazole as a synthetic auxiliary are first briefly considered. This is followed by a summary of its use in ring synthesis in which the construction of small; five-membered; six-membered; and larger heterocyclic rings using benzotriazole methodology are each examined separately. Finally, consideration of the use of benzotriazole in the ring annulation - particularly benzannulation - of heterocycles. Subsequent sections deal with the introduction of substituents into aromatic heterocycles; the ring substitution of saturated heterocycles; and benzotriazole assisted modification of heterocyclic substituents. The present review supplements a recent comprehensive review of benzotriazole chemistry [1] which covers the literature through 1996.     

Flow-injection successive determination of cysteine and cystine in pharmaceutical preparations

A flow-injection configuration is proposed for the individual determination of cysteine and cystine and for the mixtures of both analytes. The procedure is based on the inhibitory effect of cysteine on the oxidation of thiamine to thiochrome by mercury(II). Linear calibration graphs were obtained between 1.0 x 10(-5) and 1.0 x 10(-4)M, with a sampling rate of 22 samples/hr and relative standard deviation of 1.14%. The inclusion of a selecting valve in the configuration, to pump water or hydroxylamine, allows the successive determination of these two analytes. The applicability of the method to the determination of cysteine and cystine in pharmaceutical preparations was demonstrated by investigating the effect of potential interferences and by the analysis of commercial preparations.     

Generation and reactivity of bis(2,6-diethylphenyl)germanium(II)

The title intermediate ($\text{3a}$) is produced on photolysis of hexakis(2,6-diethyl-phenyl)cyclotrigermane ($\text{1}$) or bis(2,6-diethylphenyl)bis(trimethylsilyl)germane ($\text{4}$) as evidenced by trapping experiments, and thermally dimerizes to tetrakis(2,6-diethyl-phenyl)digermene ($\text{2a}$). Diarylgermylenes such as $\text{3a}$ do not form stable triethylamine adducts (e.g. $\text{5a}$) as has been previously reported.     

Cluster Build-up Reactions using Di-gold Cationic Fragments: Synthesis and Structural Characterization of [Os7(CO)19(Au2dppm)]

The reaction of the di-gold cation [Au₂(dppx)]²⁺ with the heptanuclear cluster dianion [Os₇(CO)₂₀]^2– affords the mixed metal cluster [Os₇(CO)₂₀{Au₂(dppx)}] (x=m (1), e (2), b (3)). On standing, in solution, this complex undergoes decarbonylation to give the cluster [Os₇(CO)₁₉{Au₂(dppx)}] (x=m (4), e (5), b (6)). The complexes have been characterised spectroscopically, and an X-ray structure determination of the dppm derivative shows that it contains a metal core based on an Os₇ edge-bridged bicapped tetrahedron with the two ₃-Au atoms capping adjacent triangular Os₃ faces of the central tetrahedron. In an analogous reaction, the carbido anion [Os₇(H)C(CO)₁₉]^– affords the neutral cluster [Os₇C(CO)₁₉{Au₂(dppm)}] (7) when treated with [Au₂(dppm)]²⁺ in the presence of base.     

Preparation of 5-substituted 3-aminofuran-2-carboxylate esters

[reaction: see text] An efficient method for the preparation of 3-aminofuran-2-carboxylate esters has been developed. This method is based on the reaction of an alpha-cyanoketone with ethyl glyoxylate under Mitsunobu conditions to produce a vinyl ether in good yield. Subsequent treatment of the vinyl ether with sodium hydride afforded the 3-aminofuran. It was also found that a one-pot procedure using the Mitsunobu reaction followed by cyclization afforded the 3-aminofuran in comparable yield. Currently, this method is limited to the synthesis of 5-alkyl-, 5-aryl-, and 4,5-fused bicyclic furans.     

The separation of hypericin's enantiomers and their photophysics in chiral environments

We report the first separation of the enantiomers of hypericin. Their steady-state optical spectra and ultrafast primary photoprocesses are investigated in chiral environments. Within experimental error, there is no difference between the two enantiomers in any of the systems considered. This is consistent with the emerging picture that the rich and extended absorption spectrum of hypericin is not a result of ground-state heterogeneity. It is also consistent with the observation that the spectra and photophysics of hypericin are generally insensitive to environments in which it does not aggregate.     

Molecular dynamics simulations of a nucleoside analogue of 1,4-dihydro-4-oxoquinoline-3-carboxylic acid synthesized as a potential antiviral agent: Conformational studies in vacuum and in water

Conformational analysis of nucleosides may have direct applications to the structure–activity relationship (SAR) studies and in the design of new drug candidates. Although conformational analysis may be accessed in many different ways, in this work it was performed using molecular dynamics (MD) simulation in order to study the dynamic behavior of a nucleoside derivative of 1,4-dihydro-4-oxoquinoline-3-carboxylic acid, synthesized by our group as a potential antiviral agent. The MD simulation was carried out during 10 ns in vacuum and in a box of water at two different temperatures (i.e., 300 and 600 K) using the AMBER force field. The in vacuum MD simulation results are in agreement with the crystallographic structure and with the DFT calculations of the nucleoside, revealing the anti conformer as the more stable one. The simulation in water, however, shows that both conformers may exist at 300 K, the temperature of the in vivo and in vitro assays, revealing that both the syn and anti conformers should be considered in a MD simulation study of the inhibitor–enzyme complex. Simulations are also in agreement with the NOE experiment, which shows that the anti conformer is the preferential one in DMSO-d6 solution at 298 K.