Microscale sample deposition onto hydrophobic target plates for trace level detection of neuropeptides in brain tissue by MALDI-MS

A sample preparation method that combines a modified target plate with a nanoscale reversed-phase column (nanocolumn) was developed for detection of neuropeptides by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS). A gold-coated MALDI plate was modified with an octadecanethiol (ODT) self-assembled monolayer to create a hydrophobic surface that could concentrate peptide samples into a approximately 200-500-microm diameter spot. The spot sizes generated were comparable to those obtained for a substrate patterned with 200-microm hydrophilic spots on a hydrophobic substrate. The sample spots on the ODT-coated plate were 100-fold smaller than those formed on an unmodified gold plate with a 1-microl sample and generated 10 to 50 times higher mass sensitivity for peptide standards by MALDI-TOF MS. When the sample was deposited on an ODT-modified plate from a nanocolumn, the detection limit for peptides was as low as 20 pM for 5-microl samples corresponding to 80 amol deposited. This technique was used to analyze extracts of microwave-fixed tissue from rat brain striatum. Ninety-eight putative peptides were detected including several that had masses matching neuropeptides expected in this brain region such as substance P, rimorphin, and neurotensin. Twenty-three peptides had masses that matched peaks detected by capillary liquid chromatography with electrospray ionization MS.     

Physicochemical characterization of degradable thermosensitive polymeric micelles

Amphiphilic AB block copolymers consisting of thermosensitive poly(N-(2-hydroxypropyl) methacrylamide lactate) and poly(ethylene glycol), pHPMAmDL-b-PEG, were synthesized via a macroinitiator route. Dynamic light scattering measurements showed that these block copolymers form polymeric micelles in water with a size of around 50 nm by heating of an aqueous polymer solution from below to above the critical micelle temperature (cmt). The critical micelle concentration as well as the cmt decreased with increasing pHPMAmDL block lengths, which can be attributed to the greater hydrophobicity of the thermosensitive block with increasing molecular weight. Cryogenic transmission electron microscopy analysis revealed that the micelles have a spherical shape with a narrow size distribution. 1H NMR measurements in D2O showed that the intensity of the peaks of the protons from the pHPMAmDL block significantly decreased above the cmt, indicating that the thermosensitive blocks indeed form the solidlike core of the micelles. Static light scattering measurements demonstrated that pHPMAmDL-b-PEG micelles with relatively large pHPMAmDL blocks possess a highly packed core that is stabilized by a dense layer of swollen PEG chains. FT-IR analysis indicated that dehydration of amide bonds in the pHPMAmDL block occurs when the polymer dissolved in water is heated from below to above its cmt. The micelles were stable when an aqueous solution of micelles was incubated at 37 degrees C and at pH 5.0, where the hydrolysis rate of lactate side groups is minimized. On the other hand, at pH 9.0, where hydrolysis of the lactic acid side groups occurs, the micelles started to swell after 1.5 h of incubation and complete dissolution of micelles was observed after 4 h as a result of hydrophilization of the thermosensitive block. Fluorescence spectroscopy measurements with pyrene loaded in the hydrophobic core of the micelles showed that when these micelles were incubated at pH 8.6 and at 37 degrees C the microenvironment of pyrene became increasingly hydrated in time during this swelling phase. The results demonstrate the potential applicability of pHPMAmDL-b-PEG block copolymer micelles for the controlled delivery of hydrophobic drugs.     

An intercomparison of sampling techniques for measurements of radiocaesium in upland pasture and soil

An intercomparison of sampling procedures used by five laboratories for the determination of radiocaesium in vegetation and peaty soil was carried out at two locations in Cumbria. The multiple sampling has given information on the homogeneity of the parameters studied at each location. The parameters comprise soil bulk densities, total deposition of¹³⁷Cs, deposition of¹³⁷Cs in three soil layers, biomass densities, concentrations of¹³⁷Cs in pasture, and activity ratios (¹³⁴Cs/¹³⁷Cs) in soil and vegetation. The determination of total deposition of¹³⁷Cs gave no indication of differences between the laboratories. The results from the soil profiles do indicate significant differences between laboratories. One laboratory using a coring technique observed difficulties during sampling due to compression of the soil. The coring technique should thus be avoided or applied with extreme care for the sampling of depth profiles in peaty soil. The results from the sampling of pasture show no indication of differences between the laboratories. For the parameters studied the observed variabilities across soil depths and locations range from 10% to 81% in terms of relative standard deviations. A comparison across all results at the two locations indicate a 50% higher field variability at one of the sites relative to the other.     

Behavior of radiocesium in atmospheric arerosol and fallout in Prague

Radiocesium in ground layer atmospheric aerosol and fallout in Prague has been examined. After a decline in 1986–1988, controlled by a sum of two negative exponentials,¹³⁷Cs aerosol concentration reached a constant level based on an equilibrium between its deposition and resuspension. Deposition velocity was compared to that of⁷Be and²²⁶Ra. It confirmed the supposed source of¹³⁷Cs as resuspension from the ground. Resuspension factor of the order of magnitude of 10^–9 was determined, reminding similar values found earlier in Prague as well as those found in Munich. It also agrees well with the USAEC resuspension model. Solubility of¹³⁷Cs was measured in combined wet and dry fallout. The average undissolved fraction of¹³⁷Cs was found to be about 70% which can be explained by the conditions of the¹³⁷Cs aerosol formation in Chernobyl.     

Synthesis and burst strength of water‐swollen immunoisolatory tubules

A series of amphiphilic hydrogel tubules have been prepared by copolymerizing/crosslinking hydrophilic poly(dimethylacrylamide) segments with hydrophobic di‐, tri‐, and octamethacrylate‐telechelic polyisobutylene crosslinkers, and their elastic modulus and burst strength in the water‐swollen state were investigated. Because the burst characteristics of hydrogels have not yet been quantitatively investigated, equipment was designed and built to generate fundamental insight into the burst properties of thin‐walled (200–250 μm) narrow lumen (2–3 mm i.d.) water‐swollen tubules. The theory developed to describe quantitatively the inflation behavior of thin‐walled rubber tubules was adapted to treat our experimental observations. Changes in the burst strength, elastic modulus, and expansion during the inflation of hydrogel tubules were interpreted in terms of the molecular weight of the hydrophilic segments between crosslinking sites (M_{c,hydrophilic}), which in turn was calculated according to the rubber elasticity theory. According to these investigations, the burst strength of our water‐swollen amphiphilic tubules is in the 0.2–0.5 MPa range, which is sufficient for implantation and immunoisolatory applications. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2075–2084, 2002     

Isolation of ammonium-N as 1-sulfonato-iso-indole for measurement of delta15N

The conversion of ammonium (NH(4) (+)) to 1-sulfonato-iso-indole has been examined as a method for natural abundance measurement of delta(15)N of NH(4) (+). The reaction is complete within 2 h and is based on the derivatisation of NH(4) (+) by o-phthaldialdehyde and sodium sulfite at a high pH, 11.2. The product is readily concentrated from dilute solutions by reverse-phase solid-phase extraction (SPE). The method is compound-specific despite partial derivatisation of potentially interfering amino acids, as their derivatives are not extracted by SPE. delta(15)N values of NH(4) (+) in KCL soil extracts can be measured within 48 h by automated continuous-flow IRMS with a precision of 0.23 per thousand (1 SD). Parallel measurements of NH(4) (+) standards of known delta(15)N are made to allow correction for the isotopic dilution by non-sample NH(4) (+). The practicality of this method is demonstrated by measuring the changes in NH(4) (+) concentration and delta(15)N following the addition of urea as a nitrogen source to inorganic N-depleted soil.     

Exciton diffusion and interfacial charge separation in meso-tetraphenylporphyrin/TiO2 bilayers: effect of ethyl substituents

The photoinduced charge separation efficiency in porphyrin/TiO2 bilayers has been determined using the time-resolved microwave conductivity (TRMC) technique. Porphyrins investigated are unsubstituted meso-tetraphenylporphyrin (TPP) and meso-tetra(4-ethylphenyl)porphyrin (TEPP). TEPP/TiO2 bilayers exhibit a charge separation efficiency per incident photon at the Soret band maximum of 6.2%, which is considerably higher than the efficiency of 1.2% found for TPP/TiO2 bilayers. Exciton diffusion lengths of 7 A for TPP and 75 A for TEPP are obtained from fitting a model for the charge separation efficiency to the experimental data. Optical measurements on the porphyrin derivatives on quartz yield a 20 times higher fluorescence quantum yield and a 7 times higher fluorescence rate constant for TEPP layers as compared to TPP layers. The exciton lifetime of 800 ps found for TEPP layers is considerably longer than the lifetime of 260 ps in TPP layers. The exciton diffusion coefficients, determined from the exciton diffusion length and the exciton lifetime, are found to be 2.10(-9) m(2)/s for TPP and 7.10(-8) m(2)/s for TEPP. The difference is discussed in terms of the presence of face-to-face dimers or larger aggregates in TPP layers.     

Reaction of carbonyl fluoride with fluorine in the presence of various fluorides as catalysts

The fluorides KF, RbF and CsF have been known to serve as catalysts for the reaction CF₂O + F₂→ CF₃OF. The list of catalysts for this process has now been enlarged to include NaF, MgF₂, CaF₂, SrF₂, BaF₂ and LaF₃. Lithium fluoride and thorium fluoride also give CF₃OF but are less active. Perhaps the substances CsF·HF, KAgF₄ and NiF₂ should be included in this list. Silver fluoride, usually as a mixture of AgF₂ with AgF, has been known to catalyze the reaction of CF₂O with F₂ to give both CF₃OF and CF₃OOCF₃. The proportion of the latter in the mixture of products increases with decreasing temperature. At 25°, the reaction is slow and the yield of CF₃OOCF₃ is very high. It has now been shown that TIF₃ behaves like silver fluoride. It has also been shown that many other fluorides of metals give higher yields of CF₃OOCF₃ than of CF₃OF but require higher temperatures than AgF₂ (100-ca. 150°) to be effective. Various possible mechanisms for these catalytic processes are discussed.     

Ligand requirements for glmS ribozyme self-cleavage

Natural RNA catalysts (ribozymes) perform essential reactions in biological RNA processing and protein synthesis, whereby catalysis is intrinsic to RNA structure alone or in combination with metal ion cofactors. The recently discovered glmS ribozyme is unique in that it functions as a glucosamine-6-phosphate (GlcN6P)-dependent catalyst believed to enable "riboswitch" regulation of amino-sugar biosynthesis in certain prokaryotes. However, it is unclear whether GlcN6P functions as an effector or coenzyme to promote ribozyme self-cleavage. Herein, we demonstrate that ligand is absolutely requisite for glmS ribozyme self-cleavage activity. Furthermore, catalysis both requires and is dependent upon the acid dissociation constant (pKa) of the amine functionality of GlcN6P and related compounds. The data demonstrate that ligand is integral to catalysis, consistent with a coenzyme role for GlcN6P and illustrating an expanded capacity for biological RNA catalysis.     

Tetranuclear Pt<Subscript>2</Subscript>Cu<Subscript>2</Subscript> Complex with a Staircase-Shaped Chain Aggregate in the Solid State

The reaction of the tetranuclear cyanide aquo complex [{Pt(CN)₄Cu(bipy)(H₂O)}₂]· 2H₂O with aqueous ammonia produces the new tetranuclear ammino-containing product [{Pt(CN)₄Cu(bipy)(NH₃)}₂] (1), with terminal cyanide groups and with NH₃ coordinated to the Cu atom. The distorted trigonal bipyramidal coordination about copper in 1 differs from the square-pyramidal coordination present in the starting material. The bipyridine ligand in 1 is nearly perpendicular to the tetranuclear core of the molecule, as opposed to its coplanar disposition in the aquo complex. The two platinum atoms of the tetranuclear core in 1 form Pt···Pt interactions of 3. 2390(8) Å with platinum atoms of neighboring molecules, producing an echelon-shaped supramolecular chain held together by staggered (CN)₄Pt···Pt(CN)₄ linkages, an aggregate structure which does not have a precedent in chemistry derived from the Pt(CN)₄ building block.