Continuous wave 1.6 μm laser action in Er doped garnets at room temperature⋆

We report on room-temperature cw laser action of Er³⁺: Yttrium-aluminum-garnet (YAG) and Er³⁺: Yttrium-gallium-garnet (YGG) crystals at 1.64 m. The laser operates from the metastable⁴ I _13/2 manifold into an upper Stark level of the⁴ I _15/2 ground-state manifold of Er³⁺. Due to reabsorption losses, the Er³⁺ concentration of the laser crystals must be low. Laser pumping at a wavelength of 647.1 nm yields lowest thresholds around 30 mW and slope efficiencies up to 12.7% for Er:YAG. Laser operation in Er:YGG is achieved with higher thresholds of about 200 mW and smaller slope efficiencies of 0.9%. The effective emission cross section in YAG is estimated to be _e5×10^–21 cm².Dedicated to Prof. Dr. Herbert Welling on the occasion of his 60th birthday     

Influence of end reflectivity on gain saturation in a planar distributed feedback laser

An approximate method for the analysis of planar-waveguide distributed-feedback lasers is extended to include a nonvanishing reflectivity at the ends of the structure. An index grating structure with parasitic losses is investigated. An expression for the small-signal gain coefficient ^0MN as a function of the output power P ^MNout normalized to the saturation power P ^s , coupling coefficient K, complex reflectivity R of end reflectors, and waveguide parameters is presented.     

Conductivity relaxation in glass: Compositional contributions to non-exponentiality

That ionic conductivity in glass is a non-exponential process and has been known for many years. The amorphous structure of glass and hence a distribution of cation sites has often been thought to be the cause for the non-exponentiality. Almost completely unresearched, however, has been the effect of glass composition on the nature of the relaxation process. In this paper, we review the observations that have been made of the relationships between glass composition and the non-exponential character of the conductivity relaxation as well combine our recent wide composition range studies of sodium aluminoborate and lithium phosphate glasses to delineate the major features of the correlation. By examining glass compositions ranging from 0.02 to 60 mole% alkalioxide, it is observed that the rapid development of non-exponentiality within 1% Na₂O is accompanied by a similar rapid decrease in the average cation-cation separation distance, this being calculated using the composition and density. Other quantities such as the dc conductivity or activation energy are observed to vary too slowly with composition to produce a linear correlation with the extent of non-exponentiality as monitored in the parameter of the stretched exponentialkww function.     

The influence of hydrogen on the atomic distribution function and electrical resistance of amorphous chromium films

Electrical resistivity of amorphous chromium films (20–37 nm thick) deposited in a hydrogen atmosphere (P _{H 2}=8·10^–6–2·10^–4 hPa) onto a substrate cooled by liquid helium down to 2 K is measured, and electron-diffraction studies have been performed immediately after the quench condensation and after annealing to different temperatures up to 300 K. The preparation method employed permits a considerable hydrogen enrichment of the films to be reached. The maximum hydrogen concentration corresponds approximately to a stoichiometric composition of CrH. It is found that as the maximum concentration is approached the atomic distribution functionG(r) changes remarkably. The interatomic distances increase considerably (by 10%) and the atomic densities decrease. It is quite possible that amorphous chromium hydride is a final state with the maximum hydrogen concentration. For films with intermediate concentration,G(r) is found to vary substantially under annealing up to 90 K. The electron-diffraction and electronmicroscopic data, as well as the variations in resistivity due to annealing, suggest that with annealing up to 90 K, a hydrogen redistribution occurs in the amorphous films, initially homogenous in concentration. We observe also distinct indications of separation into phases with increased and reduced hydrogen contents.     

Dispersive anisotropic ballistic phonon propagation in [100] GaAs

We report experimental observations of the phonon focusing pattern in [100] GaAs using low temperature electron beam scanning for phonon generation. The typical dispersive effects for high-frequency phonons expected from the calculations by Tamura have clearly been observed using PbIn tunnel junctions for phonon detection. The quantitative comparison of our experimental results with the frequency dependent calculations by Tamura allowed to determine the dominant phonon frequencies contributing to the detector signal in our different experiments. Above the temperature of the -point the dominant phonon frequencies appear to be shifted considerably to lower values, which could be explained by a heating effect in the liquid-He layer adjacent to the tunnel junction detector. By comparing the observed magnitude of the detector signal with different theoretical treatments of the detector response, we have found satisfactory agreement for a model where the perturbation due to the high-frequency phonons is restricted to the base electrode of the detector reached first by the phonons following their passage through the crystal.     

Spectroscopic investigation of the ionization kinetics in XeCl laser discharges by Xe* density measurements

Time and spatially resolved absorption measurements of Xe^* particle number densities performed at an X-ray preionized self-sustained XeCl^*-laser discharge were used to investigate the reaction kinetics of such discharges and to test the validity of the commonly-made assumption that they are fit well by spatially homogeneous numerical models. It turned out that the Xe^* density distribution over the discharge cross section remains homogeneous for less than 100 ns only. Comparing the experimental results of the homogeneous discharge phase with zero-dimensional model calculations, we conclude that induced emission modeled using two excited xenon levels must be taken into account for the quantitative interpretation of the absorption measurements. For the interpretation of the Xe 6s-6p absorption measurements even a multilevel model will be necessary. Further we conclude from the relative courses and the absolute values of the Xe^* particle number densities that realistic HCl kinetics should contain three vibrationally excited levels and stepwise excitation processes as proposed by Dem'yanov et al. [8].     

Accurate determination of wavenumbers for iodine molecular lines in the red spectral region

The hyperfine structure of various absorption lines of molecular iodine with wavenumbers between 12980 and 13890 cm^–1 has been resolved using Doppler-free polarization spectroscopy. The wavenumbers of theo-component of 17 rovibrational lines of I₂ due to the transitionB ³ _ou ⁺ –X¹ _g ⁺ with even rotational quantum numbers have been determined with an accuracy of 0.001 cm^–1. A comparison of the centers of gravity of these 17 lines with the values of the iodine atlas of Gerstenkorn et al. yields a difference of thus corroborating the data of the iodine atlas in the red region within limits of error.     

Ozone production in oxygen by means of F2-laser irradiation at λ=157.6 nm

Ozone is generated in pure oxygen (p5 kPa), synthetic air (p7 kPa) and oxygen-argon mixtures (p3 kPa) by irradiation of these gases with the VUV light of a repetitively pulsed (f _L15 Hz) F₂-laser at =157.6 nm with maximum about 4 mJ/pulse. An absorption photometer measurement operating at 253.7 nm (Hg line) determines the ozone concentration as a function of oxygen and/or additive gas pressure, the repetition frequency of the laser and the wall temperature of the reaction chamber. The temporal development of the ozone concentration as a function of these parameters is calculated by means of rate equations for the species O(³ P), O₂(X ³ _g ^– ), O₃(¹ A ₁), O(¹ D), O₂(a ¹_g), O₂(b ¹ _g ⁺ ) and vibrationally excited O ₃ ^* (¹ A ₁) and the photon distribution. The maximum concentration of O₃ in the sealed-off chamber reaches 1.6% in pure O₂, 4.1% in air and 1.2% in a 1:5 O₂-Ar mixture at 3 kPa. The annihilation of O₃ by the wall and temperature dependent volume processes (300 KT395 K) is studied and the experimental and theoretical results are compared.