New salts based on imidazolium, pyrrolidinium, phosphonium, guanidinium, and ammonium cations together with the 5‐cyanotetrazolide anion [C2N5]? are reported. Depending on the nature of cation–anion interactions, characterized by XRD, the ionic liquids (ILs) have a low viscosity and are liquid at room temperature or have higher melting temperatures. Thermogravimetric analysis, cyclic voltammetry, viscosimetry, and impedance spectroscopy display a thermal stability up to 230 °C, an electrochemical window of 4.5 V, a viscosity of 25 mPa s at 20 °C, and an ionic conductivity of 5.4 mS cm?1 at 20 °C for the IL 1‐butyl‐1‐methylpyrrolidinium 5‐cyanotetrazolide [BMPyr][C2N5]. On the basis of these results, the synthesized compounds are promising electrolytes for lithium‐ion batteries. 相似文献
Journal of Nanoparticle Research - Plasmonic interfaces consisting of silver nanoparticles of different sizes (50–100&;nbsp;nm) have been processed by the self-assembled dewetting... 相似文献
Cyclohexane and cyclotri-β-alanyl have been used as scaffolds for the design of new C3-symmetric rings incorporating conjugated alkenes and dienes. All three C3-symmetric lactams share the same triangular shape and their crystal system is trigonal. They all belong to the R3 space group, R3m, R3 and R3c, for the increasingly large 12-, 18- and 24-membered rigid rings, respectively. All lactams stack on top of each other, through H-bonds and van der Waals noncovalent interactions, leading to endless supramolecular cylinders and tubes. The largest member of the family leads to tubes, the central pores of which is wide enough to let water in. A common feature of all the lactams is their very large dipole, of around 9 D, according to DFT calculations. Surprisingly, all the resulting cylinders and tubes pack side by side in the crystals, with all the dipoles pointing to the same direction. As a result, all three crystals are anisotropic and appear to be the first members of a new kind of highly polar crystals. 相似文献
The diffusive behavior of nanoparticles inside porous materials is attracting a lot of interest in the context of understanding, modeling, and optimization of many technical processes. A very powerful technique for characterizing the diffusive behavior of particles in free media is dynamic light scattering (DLS). The applicability of the method in porous media is considered, however, to be rather difficult due to the presence of multiple sources of scattering. In contrast to most of the previous approaches, the DLS method was applied without ensuring matching refractive indices of solvent and porous matrix in the present study. To test the capabilities of the method, the diffusion of spherical gold nanoparticles within the interconnected, periodic nanopores of inverse opals was analyzed. Despite the complexity of this system, which involves many interfaces and different refractive indices, a clear signal related to the motion of particles inside the porous media was obtained. As expected, the diffusive process inside the porous sample slowed down compared to the particle diffusion in free media. The obtained effective diffusion coefficients were found to be wave vector-dependent. They increased linearly with increasing spatial extension of the probed particle concentration fluctuations. On average, the slowing-down factor measured in this work agrees within combined uncertainties with literature data.
The development of a new three-component chromatography-free reaction of isocyanides, amines and elemental sulfur allowed us the straightforward synthesis of thioureas in water. Considering a large pool of organic and inorganic bases, we first optimized the preparation of aqueous polysulfide solution from elemental sulfur. Using polysulfide solution, we were able to omit the otherwise mandatory chromatography, and to isolate the crystalline products directly from the reaction mixture by a simple filtration, retaining the sulfur in the solution phase. A wide range of thioureas synthesized in this way confirmed the reasonable substrate and functional group tolerance of our protocol. 相似文献
A model is developed for the formation and propagation of cracks in a material sample that is heated at its top surface, pyrolyses, and then thermally degrades to form char. In this work the sample is heated uniformly over its entire top surface by a hypothetical flame (a heat source). The pyrolysis mechanism is described by a one-step overall reaction that is dependent nonlinearly on the temperature (Arrhenius form). Stresses develop in response to the thermal degradation of the material by means of a shrinkage strain caused by local mass loss during pyrolysis. When the principal stress exceeds a prescribed threshold value, the material forms a local crack. Cracks are found to generally originate at the surface in response to heating, but occasionally they form in the bulk, away from ever-changing material boundaries. The resulting cracks evolve and form patterns whose characteristics are described. Quantities examined in detail are: the crack spacing in the pyrolysis zone; the crack length evolution; the formation and nature of crack loops which are defined as individual cracks that have joined to form loops that are disconnected from the remaining material; the formation of enhanced pyrolysis area; and the impact of all of the former quantities on mass flux. It is determined that the mass flux from the sample can be greatly enhanced over its nominal (non-cracking) counterpart. The mass efflux profile qualitatively resembles those observed in Cone Calorimeter tests. 相似文献