Fluorination of 2-alkyl-substituted oxanes. The synthesis and purification of perfluoro(2-alkyl-substituted oxane)s

Five kinds of 2-alkyl-substituted oxanes like 2-ethyloxane, 2-n-propyloxane, 2-iso-propyloxane, 2-n-butyloxane and 2-n-amyloxane were fluorinated electrochemically to give the corresponding perfluoro(2-alkyloxane)s. The perfluoro(2-alkyloxane)s were obtained in good yields from these starting materials together with isomeric perfluoro(2-alkyloxolane)s, perfluoro(2-alkyl-5-methyloxolane)s and perfluoro(dialkyl ether)s. The purification of the perfluoro(2-alkyloxane)s which contained small amounts of isomeric perfluoro(2-alkyloxolane)s was successfully achieved by recovering the former unreacted after treating these mixture with anhydrous aluminum chloride at 150 /sR 160 °C during /sR 48 hrs in order to convert the latter into the easy-separable perfluoro(2,5,5- trichloro-2-alkyloxolane)s. Small quantities of new perfluoro(5,5-dichloroalkanoyl chloride)s were also among the chlorination products. The spectroscopic data as well as the physical properties of these new fluorination products, and perfluoro(2,5,5-trichloro-2-alkyloxolane)s and perfluoro(5,5-dichloroalkanoyl chloride)s are presented.     

The behaviour of dyes at oil/water interfaces

Summary The adsorption of ionic dyes, the builder effect, and the interaction between ionic dyes and surface active agents were investigated by using the electrocapillarity at oil/water interfaces. The oil phase was the solution of tetra-butylammonium chloride, sodium cetylsulphate, cetylpyridinium chloride or stearylamine in methylisobutylketone, and the water phase contained various dyes in addition to the inorganic electrolyte. The interfacial tension decreased over the anodic (or cathodic) polarization range, when anionic (or cationic) dyes were added to the water phase, thus indicating the dye adsorption at the interface. The interfacial excess of dye ions was found to increase linearly with the cubic roots of dye concentration and of ionic strength of the water phase. The counterion binding took place at the oil/water interface between anionic (or cationic) dyes and positive (or negative) head groups of surface active agent ions adsorbed at the interface. It was found that the equilibrium constants of binding between anionic dyes and cationic surface active agents at the oil/water interface were of the same order of magnitude as, and a little larger than, those obtained at the water bulk phase.

---

Zusammenfassung An Öl-Wasser-Grenzflächen wurde die Adsorption ionischer Farbstoffe, die Füllerwirkung und die Wechselwirkung zwischen ionischen Farbstoffen und grenzflächenaktiven Verbindungen mit Hilfe der Elektrokapillarität untersucht. Die Ölphase bestand aus einer Lösung von Tetrabutylammoniumchlorid, Natriumcetylsulfat und Cetylpyridiniumchlorid oder Stearylamin in Methylisobutylketon. Die wässerige Phase enthielt verschiedene Farbstoffe und anorganische Elektrolyte. Die Grenzflächenspannung wurde durch anodische (bzw. kathodische) Polarisation erniedrigt, wenn anionischer (bzw. kationischer) Farbstoff zur Wasserphase gegeben wurde. Dies zeigt an, daß Farbstoff an der Grenzfläche adsorbiert wird. Die Grenzflächenkonzentration des Farbstoffions nimmt linear mit der Kubikwurzel der Farbstoffkonzentration und mit der Ionenstärke zu. Als Gegenionen für die anionischen (bzw. kationischen) Farbstoffe an der Grenzfläche wirken die positiven (bzw. negativen) Endgruppen der Tenside, die ebenfalls in der Grenzschicht adsorbiert sind. Die Gleichgewichtskonstanten für die Wechselwirkung zwischen den ionischen Farbstoffen und den grenzflächenaktiven Verbindungen sind an der Öl-Wasser-Grenzfläche von der gleichen Größenordnung bzw. geringfügig größer als in der wässerigen Volumenphase.

---

---

With 12 figures and 2 tables     

Evaluation of chiral bidentate ligand–metal complexes in asymmetric 1,3-dipolar cycloaddition reaction of nitrones with 3-alkenoyl-2-oxazolidinones

For evaluation of a chiral C₂-symmetric bis(oxazoline) ligand, its Lewis acid complexes-catalyzed asymmetric 1,3-dipolar cycloaddition reactions of nitrones with electron-deficient dipolarophiles, 3-(2-alkenoyl)-1,3-oxazolidin-2-ones, have been investigated and it was found that the cycloadditions using a Cu(II)-bis(oxazoline) complex under optimized reaction conditions induced extremely high enantioselectivity.     

Speciation of mercury in salmon egg cell cytoplasm in relation with metallomics research

Speciation of mercury in salmon egg cell cytoplasm was investigated by surfactant-mediated high-performance liquid chromatography/inductively coupled plasma mass spectrometry (HPLC/ICP-MS), where an ODS (octadecylsilica) column coated with a bile acid derivative, CHAPS (3-[(3-cholamidopropyl)-dimethylammonio]-1-propane sulfonate), was used for species separation. Prior to the speciation analysis, total Hg in the cell cytoplasm was determined by ICP-MS at m/z 202 in a flow injection mode. For the precise measurement, salmon egg cell cytoplasm was diluted five-fold with 0.1 M Tris (Tris(hydroxymethyl)aminomethane)-HNO₃ buffer solution, and the standard addition method was employed. Thus, the total concentration of Hg in cell cytoplasm was estimated to be 12.4 ng g⁻¹ on the wet weight basis. Next, the cell cytoplasm diluted five-fold with 0.1 M Tris-HNO₃ buffer solution was analyzed by surfactant-mediated HPLC with the dual detection system of a UV absorption detector and an ICP-MS instrument. Two peaks corresponding to some proteins and small molecules were mainly observed in those chromatograms. When salmon egg cell cytoplasm was diluted five-fold with 0.01 M Tris buffer solution or pure water, some precipitates appeared probably because of precipitation of hydrophobic proteins in cytoplasm. After the precipitates were eliminated with a membrane filter, the filtrate was subjected to the analysis by surfactant-mediated HPLC/UV/ICP-MS. As a result, the peaks for small molecular species of Hg were clearly observed at the retention time near 4.0 min (corresponding to low-molecular weight zone) in the chromatograms with UV absorption detection as well as with Hg- and S-specific ICP-MS detections. The small molecule bound with Hg was identified as cysteine through the cysteine-spiked experiment. In addition, the protein fraction on the chromatogram obtained by using the CHAPS-coated ODS column was further analyzed by SEC (size exclusion chromatography). Consequently, several protein peaks with molecular weight of 300, 50 and 12 kDa were observed in all the detections of UV absorption, Hg and Se, although two peaks among them were coincident in the case of S. These results indicate that Hg in salmon egg cell cytoplasm binds with proteins containing selenocysteine and/or cysteine residues in proteins.     

Simultaneous determination of tetrahydro-β-carbolines and β-carbolines

Summary Reversed-phase ion-pair HPLC with fluorimetric detectors connected in series was studied for the simultaneous determination of two tetrahydro--carbolines and two -carbolines. After additon of internal standards the samples were reacted with fluorescamine, and then subjected to serial extractions to remove their precursor (tryptamine) from the analytical system. This treatment not only suppressed the artefactual formation of tetrahydro--carbolines and -carbolines during analysis, but also effectively purified them. Under optimum conditions, using trifluoroacetic acid as counter ion, all analytes were separated within 14 min and without major interfering peaks. The quantitative ranges were 0.25–80.0 ng mL^–1 for both tetrahydro--carbolines and 0.1–30.0 ng mL^–1 for both -carbolines. Replicate spiking experiments showed that recovery from most of the samples tested was over 90% and the relative standard deviation ranged from 0.7 to 10.4% within and between assays. The proposed method was applicable to various materials such as soy sauce, vinegar, ketchup, tabasco, beer, wine, sake, whisky, brandy, cows' milk, coffee, cocoa, cheese, cigarette smoke and urine.     

Thermostability of <Emphasis Type="Italic">Cromobacterium viscosum</Emphasis> lipase in AOT/isooctane reverse micelle

The thermostability of Cromobacterium viscosum lip ase (EC 3.1.1.3) entrapped in AOT (sodium bis-[2-ethylhexyl] sulfosuccinate) reverse micelles was in creased by the addition of short-chain polyethylene glycol (PEG 400). Two different approaches were considered: (1) the determination of half-life time and (2) the mechanistic analysis of deactivation kinetics. The half-life of lipase entrapped in AOT/isooctane reverse micelles with PEG 400 at 60°C was 28h, ninefold higher than that in reverse micelles without PEG 400. The lip ase entrapped in both reverse micellar systems followed a series-type deactivation mechanism involving two first-order steps. The deactivation constant for the first step at 60°C in PEG containing reverse micelles was 0.055 h¹¹, 11-fold lower than that in reverse micelles without PEG, whereas it remained almost constant for the second step. The inactivation energy of the lip ase entrapped in reverse micelles with and without PEG 400 was 88.12 and 21.97 kJ/mol, respectively.     

Regioselective lithiation of II-(arene)chromium tricarbonyl complexes

Chromium tricarbonyl complexes of 3-methoxybenzyl alcohol and related compounds were selectively lithiated at the 4-position in contrast to the corresponding metal free arene compounds. The resulting 4-lithio complexes were converted to the 4-substituted arene compounds in moderate to excellent yields through the reactions with proper electrophiles and subsequent demetalation.     

Release characteristics of a free polyunsaturated fatty acid from an oily lymphographic agent

The release profiles of a free polyunsaturated fatty acid, alpha-linolenic acid, from solutions in an oily lymphographic agent Lipiodol-Ultra-Fluid (Lipiodol), to rabbit and human plasma, phosphate buffer solution (PBS), and PBS containing bovine serum albumin (BSA) were examined in vitro. The times required for 50% release of alpha-linolenic acid from Lipiodol were about 1 and 1.5 h in the rabbit and human plasma, respectively. Although only a slight amount of alpha-linolenic acid was released from Lipiodol to PBS after 24 h incubation at 37 degrees C, release was markedly enhanced by the addition of BSA to PBS. The amount of alpha-linolenic acid released from Lipiodol into PBS containing 5% BSA increased as the alpha-linolenic acid content in Lipiodol was increased. In all experiments, the release had stopped before all alpha-linolenic acid had been released. The prolongation of alpha-linolenic acid release from Lipiodol is considered a requisite for a selective anticancer effect of Lipiodol containing a free fatty acid on liver cancer.     

Blue myoglobin reconstituted with an iron porphycene shows extremely high oxygen affinity

Myoglobin will be a good scaffold for engineering a function into proteins. To modulate the physiological function of myoglobin, almost all approaches have been demonstrated by site-directed mutagenesis, however, there are few studies which show a significant improvement in the function. In contrast, we focused on the replacement of heme in the protein with an artificial prosthetic group. Recently, we prepared a novel myoglobin reconstituted with an iron porphycene as a structural isomer of mesoheme. The bluish colored reconstituted myoglobin is relatively stable and the deoxymyoglobin reversibly binds ligands. Interestingly, the O2 affinity of the reconstituted myoglobin, 1.1 x 109 M-1, is a significant 1,400-fold higher than that of the native myoglobin. Furthermore, the unfavorable autoxidation kinetics show 7-fold decrease in rate for the reconstituted myoglobin relative to the native myoglobin, indicating the stable oxy-form against autoxidation. The net results come from the slow dissociation of the O2 ligand in the reconstituted myoglobin, koff = 0.11 s-1, because of the formation of strong hydrogen bond between His64 and negatively charged dioxygen. The present study indicates that the replacement of native heme with an artificially created prosthetic group will give us a unique function into a hemoprotein.     

The effect of gas injection on a thermal argon plasma flow in a water-cooled tube

The effect of gas injection on an atmospheric thermal argon plasma flow in a water-cooled tube was investigated experimentally and numerically. The injection gas is argon, helium, or nitrogen. The static pressure with helium injection increases greatly because of its high thermal conductivity, while little increase occurs for nitrogen injection because of the dissociation. The increasing rate of the static pressure depends on the ratio of the momentum term to the viscosity term. The heat flux to the tube wall with gas injection changes less than that without injection. The numerical results showed variations similar to the experimental ones.