Oxidation Reactivity of Bis(μ‐oxo) Dinickel(III) Complexes: Arene Hydroxylation of the Supporting Ligand

In the nick(el) of time : Bis(μ‐oxo) dinickel(III) complexes 2 (see scheme), generated in the reaction of 1 with H₂O₂, are capable of hydroxylating the xylyl linker of the supporting ligand to give 3 . Kinetic studies reveal that hydroxylation proceeds by electrophilic aromatic substitution. The lower reactivity than the corresponding μ‐η²:η²‐peroxo dicopper(II) complexes can be attributed to unfavorable entropy effects.

     

A Unified Strategy for Exceptionally High Diastereoselectivity in the Photochemical Ring Closure of Chiral Diarylethenes

Into my arms : Photochemical cyclization of diarylethenes that have two chiral side arms showed up to 100 % de (see scheme). Introduction of these chiral side arms onto the carbon atoms where ring closure occurs is a general strategy for the highly diastereoselective cyclization of diarylethenes.

     

Inside Cover: Self‐Assembly of One‐ and Two‐Dimensional Hemoprotein Systems by Polymerization through Heme–Heme Pocket Interactions (Angew. Chem. Int. Ed. 7/2009)

Supramolecular protein polymers consisting of cytochrome b₅₆₂ monomers with heme covalently attached to the protein surface are presented by T. Hayashi and co‐workers in their Communication on page 1271 ff. Not only one‐dimensional hemoprotein fibers with submicrometer lengths have been prepared, but when a heme triad was added as a pivot molecule, two‐dimensional protein assembly networks resulted, which cover over 100 square micrometers.

     

Evaluation of the Efficiency of the Macrolactonization Using MNBA in the Synthesis of Erythromycin A Aglycon

Various intermediates for the synthesis of erythronolide A, an aglycon of erythromycin A, are prepared from the corresponding seco‐acids using 2‐methyl‐6‐nitrobenzoic anhydride (MNBA) in the presence of 4‐(dimethylamino)pyridine (DMAP) with or without triethylamine. The efficiency of the MNBA lactonization is assessed by studying this method and comparing the results with those of the other established macrocyclization protocols. It has been finally concluded that (i) the conformationally appropriate substrate for the monomeric cyclization gave the desired lactone in excellent yield under mild reaction conditions in the presence of MNBA and DMAP, (ii) the highly‐strained substrate for the cyclization also afforded the monomeric lactone in relatively good yield at 100°C in toluene, and (iii) the seco‐acid having stable linear conformation, which preferred dimerizing more than forming the monomeric lactone, provided the corresponding diolide in high yield with the constant ratio of the monomer to dimeric lactone (approximately 1/5). © 2009 The Japan Chemical Journal Forum and Wiley Periodicals, Inc. Chem Rec 9: 305–320; 2009: Published online in Wiley InterScience ( www.interscience.wiley.com ) DOI 10.1002/tcr.200900017     

Experimental probe for hyperconjugative resonance contribution in stabilizing the singlet state of 2,2-dialkoxy-1,3-diyls: Regioselective 1,2-oxygen migration

A detailed study of the regioselectivity of 1,2-oxygen migration was conducted using the unsymmetrically substituted singlet 2,2-dialkoxy-1,3-diarylcyclopentane-1,3-diyls 5. The alkoxy group selectively migrates to the electron-donating p-methoxyphenyl-substituted carbon. The regioselective migration of oxygen clearly indicates a hyperconjugative resonance structure, that is, zwitterionic characteristics, in singlet 2,2-dialkoxy-1,3-diyls. This represents the first attempt to experimentally probe the contribution of hyperconjugation to stabilizing the singlet state.     

Synthesis and structural, electrochemical, and stacking properties of conical molecules possessing buckyferrocene on the apex

A series of conical molecules featuring a [60]fullerene/ferrocene hybrid and five aralkyl side chains (Fe[C60{C6H4-(OCO-C6H3-(OR)2-3,4)-4}5]Cp) have been synthesized and examined for their structural and electrochemical properties as well as their ability to form supramolecular structures in crystals and liquid crystals. When the R group on the side is a methyl group, the compound forms crystals in which the dipolar conical molecules are stacked head-to-tail to form a columnar structure. When the R group is as long as a C18H38 group, the compound forms liquid crystals. Oxidation of the liquid crystalline compound by an aminium salt [(4-BrC6H4)3N][SbCl6] produces the corresponding paramagnetic Fe(III) compound that also exhibits liquid crystalline properties.     

Masking mechanisms of bitter taste of drugs studied with ion selective electrodes

The masking mechanisms of the bitter taste of propantheline bromide (PB) and oxyphenonium (OB) bromide by native and modified cyclodextrins, saccharides, surfactants, organic acids, nonionic and anionic polymers, and other compounds were investigated with ion selective electrodes. The intensity of the bitter taste for a mixed solution of cyclodextrin with PB or OB was quantitatively explained from the observed electromotive force with the following assumptions: the complex and the masking agent do not have any tastes and the bitter taste is independent of other tastes. Sodium dodecyl sulfate reduced the bitter taste remarkably, and this reduction was also explicable on the basis of the same mechanism. Sodium taurodeoxycholate enhanced the bitter taste, because of its strong bitterness, although it formed 1 : 1 complexes with PB and OB. The masking mechanism of saccharides was ascribed to overcoming the weak bitterness of the drug by the strong sweetness. Lambda-carrageenan suppressed the bitter taste remarkably. This suppression was ascribed to the binding of PB and OB to lambda-carrageenan, the effect of the solution viscosity on the bitter taste, and the covering of the bitter taste receptor by lambda-carrageenan. It was suggested that the moderate masking by other polymers was attributable to the effect of the solution viscosity or the receptor covering. Native and modified beta-cyclodextrins, sodium dodecyl sulfate, lambda-carrageenan, Tween 20, and sodium carboxymethyl cellulose are good masking agents for the bitter tastes of PB and OB. The drug ion selective electrode is a useful tool for understanding of the masking mechanism of the bitter taste, screening of masking agents, and estimation of appropriate concentrations of the masking agents.     

Effect of the moisture content in aerosol on the spray performance of Stmerin D HFA preparations

Stmerin D, a pressurized metered dose inhaler (MDI) for treatment of asthma, contains CFCs (chlorofluorocarbons) as a propellant. For the CFC replacement study, two formulations were prepared using hydrofluoroalkanes (HFA-134a and HFA-227) and the effect of storage on the spray performance was investigated under accelerated stress conditions. Drug stability, moisture content and spray performances such as the emitted dose uniformity and aerodynamic particle size distribution were evaluated. Drug content did not change after 3 months storage at 40 degrees C/75% RH. However, the emitted dose uniformity varied and the respirable fraction (RF) was reduced remarkably. While stored at 40 degrees C/ambient for 3 months, no change was observed in either drug content or spray performances. This study clarified that the moisture content in the canister played an important role on the spray performance, and it changed not only the emitted dose uniformity but also the particle size distribution. Consequently, in order to improve the stability of the spray performance of aerosol prepared with HFAs, moisture permeation into the canister must be controlled.     

4-(Pyrrolidinyl)methoxybenzoic acid derivatives as a potent, orally active VLA-4 antagonist

A novel series of benzoic acid derivatives as VLA-4 antagonists were synthesized. Optimization, focusing on activity and lipophilicity needed for cell permeability, resulted in the identification of 15b and 15e with good activity (IC50 = 1.6 nM each) and moderate lipophilicity (Log D = 2.0, 1.8). Furthermore, 15e demonstrated efficacy in murine asthma model by an oral dose of 30 mg/kg.     

Construction of double-stranded metallosupramolecular polymers with a controlled helicity by combination of salt bridges and metal coordination

We describe the construction of the first double-stranded metallosupramolecular helical polymers. We designed and synthesized a supramolecular duplex comprised of complementary m-terphenyl-based strands bearing a chiral amidine or achiral carboxylic acid together with two pyridine groups at the four ends. Supramolecular polymerization of the duplex with cis-PtPh2(DMSO)2 in 1,1,2,2-tetrachloroethane produced the double-stranded metallosupramolecular polymer with a controlled helicity of which the two complementary metallostrands are intertwined through the amidinium-carboxylate salt bridges. The structures and hydrodynamic dimensions of the metallosupramolecular polymers were characterized by 1H NMR, diffusion-ordered NMR, dynamic light scattering, absorption, and CD measurements. The polymeric structure was also visualized by atomic force microscopy.