Crystal structures and Mössbauer spectroscopic studies of oxo-centered trinuclear chloroacetate complexes

The crystal structures of oxo-centered trineclear cobalt-iron chloroacetate complex [Co^IIFe ₂ ^III O(CH₂ClCO₂)₆(H₂O)₃]·3H₂O (1) was compared with that of previously reported trinuclear iron complex [Fe^IIFe ₂ ^III O(CH₂ClCO₂)₆(H₂O)₃]·3H₂O (2) which has an isomorphous structure to 1. Compound 1 crystallizes in space group P2₁/n with Z=4 in a unit cell of a=14.826 (4) Å, b=4.536 (8) Å, c=14.000 (4) Å, =100.32 (2)⁰ and V=2968 (11) ų. The structure was refined to R=0.75 and R_w=0.82. The coordination geometries of the three iron atoms are observed equivalent in 1 indicating a static disorder of the position among cobalt and iron atoms. Two distinct Fe^III doublets observed in Mössbauer spectra of 1 become an indistinguishable broad doublet by dehydration of crystal water. On the other hand, no significant line-broadening is observed after the dehydration in complex 2. The results indicate that the dehydration in 2 induces a local environmental change reordering of an electronic configuration around iron atoms, whereas the remaining disordering is reflected in Mössbauer spectrum after the dehydration in 1.     

The economical parameter survey program for long-term transient temperature distribution and stress analysis around the sodium level of the liquid metal fast breeder reactor

The thermal stress around the sodium level of the LMFBR reactor vessel, caused by the axial temperature distribution during heat-up and cool-down transient conditions, is one of the most important problems for a reactor vessel designer, especially in a conceptual design stage. Key parameters relating to plant operating transient conditions and reactor vessel main configuration should be settled carefully, thermal stresses not being allowed to exceed design stress limits. In order to examine the sodium level thermal stress easily and economically, a simple computer program for parameter survey has been developed. This program uses a one-dimensional Fourier series solution in transient temperature distribution analysis, and an analytical stress solution based on shell theory in stress value estimation. This paper presents a simplified and economical calculation method for the axial temperature distribution and stress value in the LMFBR operating transient conditions, and analysis examples obtained with this computer program.

---

Zusammenfassung Der durch die axiale Temperaturverteilung während der Übergangsphase von Aufheizen und Abkühlen verursachte thermische Streß rund um den Natriumfüllstand des LMFBR-Reaktorkessels ist für den Reaktorkesselkonstrukteur, besonders im Entwurfstadiuni eines der wichtigsten Probleme. Die mit den transienten Operationsbedingungen der Anlage und der Gestaltung des Reaktorkessels in Beziehung stehenden Grundparameter müssen sorgfältig ermittelt werden, um zu verhindern, daß der thermische Streß die geplanten Streßgrenzen nicht überschreitet. Um den thermischen Streß um den Natriumfüllstand, leicht und ökonomisch zu bestimmen, wurde ein Komputerprogramm für die Parameterübersicht aufgestellt. In diesem Programm wird von einer eindimensionalen Fourrierreihe zur Analyse der transienten Temperaturverteilung und einer auf der Schalentheorie von Streßwertbestimmungen basierende analytische Lösung Gebrauch gemacht. Im vorliegenden Artikel werden eine vereinfachte und wirtschaftliche Berechnungsmethode für die axiale Temperaturverteilung und Streßwerte bei transienten Arbeitsbedingungen mitgeteilt und mit diesem Komputerprogramm ausgeführte Analysenbeispiele angegeben.

---

, - () , , , . , , , . , , - , . , , .

---

---

Paper presented at the World Conference on Thermal Analysis, Madeira (Portugal) 1986.     

Asymmetric synthesis of 2-substituted-3-aminocarbonyl propionic acid

An asymmetric synthetic route to 2-substituted-3-aminocarbonyl propionic acid, which is the significant component of low-molecular-weight renin inhibitors, is described. The key step of this synthesis is diastereoselective alkylation by using chiral oxazolidinone and benzyl bromoacetate.     

A new series of antiallergic agents. I. Synthesis and activity of 11-(2-aminoethyl)thio-6,11-dihydrodibenz[b,e]oxepin derivatives.

A new series of 11-substituted 6,11-dihydrodibenz[b,e]oxepin derivatives was synthesized and evaluated for antiallergic activity. Convenient methods for the preparation of sulfides from alcohols were developed. Structure-activity relationships are described. Compound 7, 11-[2-(dimethylamin)ethyl]thio-6,11-dihydrodibenz[b,e] oxepin-2-carboxylic acid hydrochloride, was the most potent in the rat passive cutaneous anaphylaxis test (ED50 = 0.92 mg/kg p.o.). It had a potent inhibitory effect on anaphylactic bronchoconstriction in guinea pigs (ED50 = 0.029 mg/kg p.o.) and H1 receptor antagonistic effect (Ki = 14 nM) with few central nervous system side effects. Additionally, an antagonistic effect against prostaglandin D2-induced contraction of isolated guinea pig trachea (pA2 = 5.73) was an attractive mechanism of action of the new antiallergic agent. Compound 7 was selected for further evaluation as KW-4994.     

Ruthenium(II)-catalyzed hydrogenation of carbon dioxide to formic acid. Theoretical study of real catalyst, ligand effects, and solvation effects

Ruthenium-catalyzed hydrogenation of carbon dioxide to formic acid was theoretically investigated with DFT and MP4(SDQ) methods, where a real catalyst, cis-Ru(H)2(PMe3)3, was employed in calculations and compared with a model catalyst, cis-Ru(H)2(PH3)3. Significant differences between the real and model systems are observed in CO2 insertion into the Ru(II)-H bond, isomerization of a ruthenium(II) eta1-formate intermediate, and metathesis of the eta1-formate intermediate with a dihydrogen molecule. All these reactions more easily occur in the real system than in the model system. The differences are interpreted in terms that PMe3 is more donating than PH3 and the trans-influence of PMe3 is stronger than that of PH3. The rate-determining step is the CO2 insertion into the Ru(II)-H bond. Its deltaG(o++) value is 16.8 (6.8) kcal/mol, where the value without parentheses is calculated with the MP4(SDQ) method and that in parentheses is calculated with the DFT method. Because this insertion is considerably endothermic, the coordination of the dihydrogen molecule with the ruthenium(II)-eta1-formate intermediate must necessarily occur to suppress the deinsertion. This means that the reaction rate increases with increase in the pressure of dihydrogen molecule, which is consistent with the experimental results. Solvent effects were investigated with the DPCM method. The activation barrier and reaction energy of the CO2 insertion reaction moderately decrease in the order gas phase > n-heptane > THF, while the activation barrier of the metathesis considerably increases in the order gas phase < n-heptane < THF. Thus, a polar solvent should be used because the insertion reaction is the rate-determining step.     

Novel type of heterogenized CuCl2 catalytic systems for oxidative carbonylation of methanol

A novel type of heterogenized CuCl₂ catalysts was designed for the oxidative carbonylation of methanol to dimethyl carbonate (DMC) taking account of the plausible reaction mechanism and intermediates. To prevent severe corrosion of the reaction equipment materials due to Cl^– while keeping the catalytic activity of the homogeneous CuCl₂ catalyst, we adopted, as supports (or ligands) of CuCl₂, four polymers, bearing a 2,2-bipyridine (bpy) or pyridine (py) unit, namely, poly(2,2-bipyridine-5,5-diyl) (Pbpy), poly(pyridine-2,5-diyl) (Ppy), poly(N,N-bisphenylene-2,2-bipyridine-4,4-dicarboxylic amide) (Bpya), and poly(4-methyl-4-vinyl-2,2-bipyridine) (Pvbpy), together with one chelate compound, 8-quinolinol. The catalytic activity, stability of heterogenized CuCl₂ and their corrosivities to stainless steels were examined in the liquid-phase reaction of the oxidative carbonylation of methanol. These polymer-supported catalysts showed considerable catalytic activity and stability for the DMC synthesis. In particular, the Pbpy-CuCl₂ and Ppy-CuCl₂ catalysts exhibited high DMC yields and selectivity comparable to those of the homogeneous CuCl₂ catalyst. This high activity appears to be associated with the presence of the -conjugated system in the polymers, which affect the redox reactions of Cu involved in the catalytic reaction. All of the polymer-supported CuCl₂ catalysts could be easily recycled after filtration, and the initial catalytic activity was maintained after three times of use. The corrosive characters of the catalysts were closely related to CuCl₂ leaching from the supports, which reflects the ability of supports to coordinate Cu. These experimental results suggest that both the electronic structure and the coordination ability of the polymer supports are key factors for the development of an effective catalytic system.     

Simultaneous assay of four stereoisomers of diltiazem hydrochloride. Application to in vitro chiral inversion studies

Summary The simultaneous stereospecific assay of four stereoisomers of diltiazem hydrochloride in bulk drug and aqueous solution was developed using HPLC on a Chiralcel OF column. The four isomers were quantitated with good precision by the internal standard method. The chiral inversion of (+)-cis-diltiazem hydrochloride in vitro, stability of its (2S, 3S) configuration in the solid and aqueous states was examined by HPLC. Chiral inversion of (+)-cis-diltiazem hydrochloride was not observed in the solid state, and its (2S, 3S) configuration was stable to heat, humidity and light. Chiral inversion of (+)-cis-diltiazem hydrochloride (2S, 3S) was observed in aqueous solution under UV, but not in aqueous solution stored at 80°C for 5h nor under visible light for 10 h. The (+)-cis-diltiazem hydrochloride (2S, 3S) epimerized to (+)-trans-diltiazem hydrochloride (2R, 3S) with a half-life of 5h in aqueous solution under UV but the reverse chiral inversion of (+)-trans-diltiazem hydrochloride (2R, 3S) to (+)-cis-diltiazem hydrochloride (2S, 3S) was not observed.