Effect of sucrose on the structure of a cubic phase formed from a monoolein/water mixture

The effect of sucrose on the structure of molecular assemblies formed in an MO/H2O mixture has been studied using a small-angle X-ray scattering method. It was found that the phase transition Ia3d --> Pn3m --> H(II) occurs with increased sucrose concentration in the mixture with the composition 70 wt% MO at 20 degrees C. This structural change induced by sucrose addition would be ascribed to a cosmotropic property of sucrose, which leads to the dehydration of the MO head group and hence causes a decrease in the effective area occupied by the MO molecule at the polar/apolar interface, which facilitates the formation of molecular assemblies with a high curvature for the reversed liquid-crystal mesophase.     

A concise route to the right wing of ciguatoxin

A concise route to the HIJKLM-ring fragment 10 of ciguatoxin (CTX) and 51-hydroxyCTX3C was developed in which oxiranyl anion addition and intramolecular carbonyl olefination were utilized as key transformations. The present procedure requires only 23 steps from the I-ring 5, while 35 steps were employed in a previous synthesis of the corresponding right wing 11 of CTX3C. The high efficiency of the present synthesis ensures a supply of 10 for total synthesis and biomedical applications.     

Solvothermal synthesis of large surface area zirconia

The reaction of zirconium n-propoxide in glycol at 300°C yielded microcrystalline tetragonal zirconia (ZrO₂). The crystallite size of the product depended on the carbon number of the glycol and increased in the following order (carbon number of glycol): 2<6<4, which suggested that the heterolytic cleavage of O-C bond of gylcoxide formed by transesterification is the prime factor for the formation of the product. In toluene, zirconium isopropoxide also gave tetragonal zirconia at 300°C, and zirconium tert-butoxide decomposed at 200°C yielding amorphous zirconia, while zirconium n-propoxide was stable at 300°C. These results suggest that the reaction in toluene depends on the structure of the alkyl group of the alkoxides. Thus-obtained tetragonal zirconias maintained large surface areas (90–160 m²/g) even after calcination at 500°C.     

Silylation of water glass. I. Solvent extraction and trimethylsilylation of silicic acid

Homogeneous trimethylsilylation of silicic acid in nonaqueous media was studied. The silylation process consisted of three steps: acidification of sodium silicate, solvent extraction. and trimethylation of silicic acid. Sodium silicate was first acidified with dilute sulfuric acid to form silicic acid: extraction followed with hydrophilic organic solvents. The Silicic acid obtained was finally allowed to react with trimethylchlorosilane to give trimethylsilylates with molecular weights of 1000–12,000. Optimum conditions for each step have been intensively sought to achieve trimethylsilylates in high yield. The trimethylsilylates exhibited excellent thermal stability and surface properties, such as water repellency and antifoaming properties, comparable to those of conventional polydimethylsiloxanes.     

Recent progress of high-power negative ion beam development for fusion plasma heating

A negative-ion-based neutral beam injector (N-NBI) has been constructed for JT-60U. The N-NBI is designed to inject 500 keV, 10 MW neutral beams using two ion sources, each producing a 500 keV, 22 A D⁻ ion beam. In the preliminary experiment using one ion source, a D⁻ ion beam of 13.5 A has been successfully accelerated with an energy of 400 keV (5.4 MW) for 0.12 s at an operating pressure of 0.22 Pa. This is the highest D⁻ beam current and power in the world. Co-extracted electron current was effectively suppressed to the ratio of Ie/I_D⁻ < 1. The highest energy beam of 460 keV, 2.4 A, 0.44 s has also been obtained. To realize 1 MeV class NBI system for ITER (International Thermonuclear Experimental Reactor), demonstration of ampere class negative ion beam acceleration up to 1 MeV is an important mile stone. To achieve the mile stone, a prototype accelerator and a 1 MV, 1 A test facility called MeV Test Facility (MTF) were constructed. Up to now, an H⁻ ion beam was accelerated up to the energy of 805 keV with an acceleration drain current of 150 mA for 1 s in a five stage electrostatic multi-aperture accelerator.     

Comparison of the compact dry TC method with the standard pour plate method (AOAC official method 966.23) for determining aerobic colony counts in food samples: Performance-tested method

Compact Dry TC qualifies as a rapid method kit for determining aerobic colony counts in foods. The plates are presterilized and contain culture medium and a cold-soluble gelling agent. The medium is rehydrated by inoculating 1 mL diluted sample into the center of the self-diffusible medium and allowing the solution to diffuse by capillary action. The plates can then be incubated and the colonies counted without any additional steps. The Compact Dry TC method was validated with 5 different raw meats. The performance tests were conducted at 35 degrees and 30 degrees C. In all required performance studies, no apparent differences were observed between the Compact Dry TC method and the Standard Pour Plate method (AOAC Official Method 966.23) for the detection level of aerobic microorganisms. For the accuracy claim (n = 60), a correlation factor of r2(35) = 0.9977 (35 degrees C) and r2(30) = 0.9932 (30 degrees C) could be assigned, as stated in the application for "Performance Tested Method." Quality consistency and storage robustness studies, showed no significant variations in plate count results with different production lots or plates of diverse storage age.     

Synthesis and reactivities of 10-S-3 trithiadiazapentalene derivatives

1,3-Bis(p-substituted-phenylthiocarbamoyl)-2-imidazolidinethiones 3a-f reacted with bromine to give trithiadiazapentalene derivatives 5a-f , bearing the exocyclic C-N double bonds, in moderate yields. The molecular structure of 5b was elucidated by the X-ray crystallographic analysis. The treatment of 5b-f with hydrochloric acid gave the ring-opening products, 1,3-bis(p-substituted-phenylthiocarbamoyl)-2-imidazo-lidinones 9b-f , accompanied by the production of elemental sulfur. Reduction of 5b , 5d , and 5e with sodium borohydride gave the ring-opening compounds, 1,3-bis(p-substituted-phenylthiocarbamoyl)-2-imidazolidines 13b , 13d , and 13e respectively.     

Palladium-catalyzed cycloheptatriene formation by [3+2+2] cocyclization of 2-substituted allylic alcohols and alkynes

Cycloheptatrienes were obtained by the reaction of 2-substituted allylic alcohols with alkynes in the presence of catalytic amounts of palladium complexes and p-toluenesulfonic acid.     

Dialumenes – aryl vs. silyl stabilisation for small molecule activation and catalysis

Main group multiple bonds have proven their ability to act as transition metal mimics in the last few decades. However, catalytic application of these species is still in its infancy. Herein we report the second neutral NHC-stabilised dialumene species by use of a supporting aryl ligand (3). Different to the trans-planar silyl-substituted dialumene (3Si), compound 3 features a trans-bent and twisted geometry. The differences between the two dialumenes are explored computationally (using B3LYP-D3/6-311G(d)) as well as experimentally. A high influence of the ligand''s steric demand on the structural motif is revealed, giving rise to enhanced reactivity of 3 enabled by a higher flexibility in addition to different polarisation of the aluminium centres. As such, facile activation of dihydrogen is now achievable. The influence of ligand choice is further implicated in two different catalytic reactions; not only is the aryl-stabilised dialumene more catalytically active but the resulting product distributions also differ, thus indicating the likelihood of alternate mechanisms simply through a change of supporting ligand.

Ligand controlled reactivity: a trans-bent and twisted geometry enables dihydrogen activation and enhanced catalytic activity for NHC-stabilised dialumenes.