β-二酮、邻菲罗啉分别与铕和铽三元配合物的合成及发光性能研究

为了寻找新的发光材料并研究β-二酮对稀土配合物发光性能的影响, 我们合成了一个新的β-二酮配体: 1-苯 基-3-(对苯乙炔苯基)-1,3-丙二酮(HPPP), 并用HPPP、邻菲罗啉(phen)分别与Eu(III)和Tb(III)反应, 合成了两个新的三元稀土配合物: Eu(PPP)3phen和Tb(PPP)3phen, 通过红外光谱、化学分析、元素分析对三元稀土配合物的组成和结构进行了表征. 研究了配合物的荧光性质, 发现β-二酮配体对配合物的发光有较大影响, 通过量子化学计算对实验结果进行了解释.     

Calorimetric Studies on Enthalpy Relaxation in Maltitol Glass Transition Based on Phenomenological Models

To investigate the enthalpy relaxation behavior of maltitol glass system, differential scanning calorimetry (DSC) was used to obtain the specific heat capacity[C_p(T)] near the glass transition temperature(T_g) at different coo- ling rates ranged between 1 and 20 K/min. Three phenomenological models of enthalpy relaxation, Tool-Narayanaswamy-Moynihan(TNM) model, Adam-Gibbs-Vogel(AGV) model and Gómez Ribelles(GR) model, were used to simulate the experimental data. The models’ parameters were obtained via a curve-fitting method. The results indicate that TNM and AGV models gave the almost identical prediction powers and can reproduce the curves of experimental C_p(T) very well. However, the prediction power of GR model evolved from configurational entropyapproach is not so good as those of TNM and AGV models. In particular, the metastable limit state parameter(δ) introduced by Gómez Ribelles has insignificant effect on the enthalpy relaxation of the small molecular hydrogen-bonding glass system.     

乙烯的实验室制备及性质检验的实验改进

在采用乙稀利为原料制备纯净乙烯的研究基础上,从药品配置、实验操作和装置优化等方面对乙烯的实验室制备及性质检验进行了科学改进,希望对高中化学教学有一定的启示作用。     

An experimental investigation of tribological performance of triangular textures in water lubrication regime

Surface texturing has been considered as an effective approach to improve the tribological performances.Based on the consideration of enhancing the tribological performance,the experiments are carried out to investigate tribological performance of triangular textures in water lubrication.The textures are generated by the Nd:YAG laser marking system,with an area density of 20%and a depth of 7 m and are distributed uniformly on the surface of the SiC rings.Compared with the circular textures,the triangular textures have obvious tribological anisotropy.The triangular textures in clockwise direction show the best friction reduction effect among the three textures.The friction reduction mechanisms of the triangular textures in clockwise direction are also analyzed and discussed.     

Non-Gaussian water diffusion kurtosis imaging of prostate cancer

Purpose

To evaluate the non-Gaussian water diffusion properties of prostate cancer (PCa) and determine the diagnostic performance of diffusion kurtosis (DK) imaging for distinguishing PCa from benign tissues within the peripheral zone (PZ), and assessing tumor lesions with different Gleason scores.

Materials and Methods

Nineteen patients who underwent diffusion weighted (DW) magnetic resonance imaging using multiple b-values and were pathologically confirmed with PCa were enrolled in this study. Apparent diffusion coefficient (ADC) was derived using a monoexponential model, while diffusion coefficient (D) and kurtosis (K) were determined using a DK model. Differences between the ADC, D and K values of benign PZ and PCa, as well as those of tumor lesions with Gleason scores of 6, 7 and ≥ 8 were assessed. Correlations between parameters D and K in PCa were analyzed using Pearson’s correlation coefficient. ADC, D and K values were correlated with Gleason scores of 6, 7 and ≥ 8, respectively.

Results

ADC and D values were significantly (p < 0.001) lower in PCa (0.79 ± 0.14 μm²/ms and 1.56 ± 0.23 μm²/ms, respectively) compared to benign PZ (1.23 ± 0.19 μm²/ms and 2.54 ± 0.24 μm²/ms, respectively). K values were significantly (p < 0.001) greater in PCa (0.96 ± 0.20) compared to benign PZ (0.59 ± 0.08). D and K showed fewer overlapping values between benign PZ and PCa compared to ADC. There was a strong negative correlation between D and K values in PCa (Pearson correlation coefficient r = − 0.729; p < 0.001). ADC and K values differed significantly in tumor lesions with Gleason scores of 6, 7 and ≥ 8 (p < 0.001 and p = 0.001, respectively), although no significant difference was detected for D values (p = 0.325). Significant correlations were found between the ADC value and Gleason score (r = − 0.828; p < 0.001), as well as the K value and Gleason score (r = 0.729; p < 0.001).

Conclusion

DK model may add value in PCa detection and diagnosis. K potentially offers a new metric for assessment of PCa.     

Effects of carbon sources and carbon contents on the electrochemical properties of LiFePO4/C cathode material

LiFePO₄/C composites are prepared by using two types of carbon source: one using polymer (PAALi) and the other using sucrose. The physical characteristics of LiFePO₄/C composites are investigated by X-ray diffraction), scanning electron microscopy, BET, laser particle analyzer, and Raman spectroscopy. Their electrochemical properties are characterized by cyclic voltammograms, constant current charge–discharge, and electrochemical impedance spectra. These analyses indicate that the carbon source and carbon content have a great effect on the physical and electrochemical performances of LiFePO₄/C composites. An ideal carbon source and appropriate carbon content can effectively increase the lithium-ion diffusion coefficient and exchange current density, decrease the charge transfer resistance (R _ct), and enhance the electrochemical performances of LiFePO₄/C composite. The results show that PAALi is a better carbon source for the synthesis of LiFePO₄/C composites. When the carbon content is 4.11 wt.% (the molar ratio of PAALi/Li₂C₂O₄ was 2:1), as-prepared LiFePO₄/C composite shows the best combination between electrochemical performances and tap density.     

Capture efficiency of Escherichia coli in fimbriae-mediated immunoimmobilization

Capturing pathogens on a sensor surface is one of the most important steps in the design of a biosensor. The efficiency of a biosensor at capturing pathogens has direct bearing on its sensitivity. In this work we investigated the capturing of Escherichia coli on substrates modified with antibodies targeting different types of fimbriae: K88ab (F4), K88ac (F4), K99 (F5), 987P (F6), F41, and CFA/I. The results suggest that all these fimbriae can be used for the efficient immobilization of living E. coli cells. The immobilization efficiency was affected by the purity and clone type of the antibody and the fimbriae expression level of the bacteria. For a specific fimbriae type, a higher immobilization efficiency was often observed with the monoclonal antibodies. Immunoimmobilization was utilized in an antibody microarray immersed in a mixed culture of pathogens to demonstrate the rapid and simultaneous label-free detection of multiple pathogens within less than 1 h using a single test. The capture rate of living pathogens exceeds a single bacterium per 100 × 100 μm(2) area per 0.5 h of incubation for a bulk concentration of 10(5) cfu/mL.     

Mechanical behavior of a pH-sensitive hydrogel ring used in a micro-optical device

A hydrogel is a polymer network that can absorb a large quantity of solvent and swell due to a physical or chemical stimulus. Hydrogels are more and more used as smart materials in recent micro-applications. This fact requires the development of adequate models and simulation tools for their large deformation behavior. These models must also predict the onset of instabilities, such as folding or creasing. In this work, we study an interesting application of adaptive optical microsystem using a previously developed theory of inhomogeneous large deformation of a pH-sensitive hydrogel. The devices function is based on the swelling of a ring made of a pH-sensitive hydrogel. The latter controls the focal length of the liquid microlens. Our aim is to analyze major design parameters that affect the hydrogel ring behavior and the function of the micro-optical device. The problem is solved numerically with the finite element commercial software ABAQUS. Various modes of large deformation and the influence of the rings aspect ratio on the behavior of the micro-device are investigated. Results show that, for relatively short rings, a stable swelling takes place. Rings with a relatively big aspect ratio can have an unstable swelling with the propagation of a creasing instability. (© 2012 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim)     

Resonant behavior of a membrane of a dielectric elastomer

This paper analyzes a membrane of a dielectric elastomer, prestretched and mounted on a rigid circular ring, and then inflated by a combination of pressure and voltage. Equations of motion are derived from a nonlinear field theory, and used to analyze several experimental conditions. When the pressure and voltage are static, the membrane may attain a state of equilibrium, around which the membrane can oscillate. The natural frequencies can be tuned by varying the prestretch, pressure, or voltage. A sinusoidal pressure or voltage may excite superharmonic, harmonic, and subharmonic resonance. Several modes of oscillation predicted by the model have not been reported experimentally, possibly because these modes have small deflections, despite large stretches.