Synergistic effect of magnesium and fluorine doping on the electrochemical performance of lithium-manganese rich (LMR)-based Ni-Mn-Co-oxide (NMC) cathodes for lithium-ion batteries

Mg-doped-LMR-NMC (Li_1.2Ni_0.15-xMg_xMn_0.55Co_0.1 O₂) is synthesized by combustion method followed by fluorine doping by solid-state synthesis. In this approach, we substituted the Ni²⁺ by Mg²⁺ in varying mole percentages (x = 0.02, 0.05, 0.08) and partly oxygen by fluorine (LiF: LMR-NMC = 1:50 wt%). The synergistic effect of both magnesium and fluorine substitution on electrochemical performance of LMR-NMC is studied by electrochemical impedance spectroscopy and galvanostatic-charge-discharge cycling. Mg-F-doped LMR-NMC (Mg 0.02 mol) composite cathodes shows excellent discharge capacity of ~300 mAh g^?1 at C/20 rate whereas pristine LMR-NMC shows the initial capacity around 250 mAh g^?1 in the voltage range between 2.5 and 4.7 V. Mg-F-doped LMR-NMC shows lesser Ohmic and charge transfer resistance, cycles well, and delivers a stable high capacity of ~280 mAh g^?1 at C/10 rate. The voltage decay which is the major issue of LMR-NMC is minimized in Mg-F-doped LMR-NMC compared to pristine LMR-NMC.     

Controlled Space Radiation concept for mesh-free semi-analytical technique to model wave fields in complex geometries

Numerical modelling of the ultrasonic wave propagation is important for Structural Heath Monitoring and System Prognosis problems. In order to develop intelligent and adaptive structures with embedded damage detector and classifier mechanisms, detailed understanding of scattered wave fields due to anomaly in the structure is inevitably required. A detailed understanding of the problem demands a good modelling of the wave propagation in the problem geometry in virtual form. Therefore, efficient analytical, semi-analytical or numerical modelling techniques are required. In recent years a semi-analytical mesh-free technique called Distributed Point Source Method (DPSM) is being used for modelling various ultrasonic, electrostatic and electromagnetic wave field problems. In the conventional DPSM approach point sources are placed along the transducer faces, problem boundaries and interfaces to model incident and scattered fields. Every point source emits energy in all directions uniformly. Source strengths of these 360° radiation sources are obtained by satisfying interface and boundary conditions of the problem. In conventional DPSM modelling approach it is assumed that the shadow zone does not require any special consideration. 360° Radiation point sources should be capable of properly modelling shadow zones because all boundary and interface conditions are satisfied. In this paper it is investigated how good this assumption is by introducing the ‘shadow zone’ concept at the point source level and comparing the results generated by the conventional DPSM and by this modified approach where the conventional 360° radiation point sources are replaced by the Controlled Space Radiation (CSR) sources.     

Molecular Photoacoustic Tomography with Colloidal Nanobeacons

Spotting clots : Vascularly constrained colloidal gold nanobeacons (GNBs; see picture) can be used as exogenous photoacoustic contrast agents for the targeted detection of fibrin, a major biochemical feature of thrombus. Fibrin‐targeted GNBs provide a more than tenfold signal enhancement in photoacoustic tomography in the near‐IR wavelength window, indicating their potential for diagnostic imaging.

     

Enhanced photocatalytic activity of ternary CuInS<Subscript>2</Subscript> nanocrystals synthesized from the combination of a binary Cu(I)S precursor and InCl<Subscript>3</Subscript>

Ternary copper indium sulfide (CIS) nanocrystals (NCs) have been synthesized by mixing of binary precursor [Cu^I(bdpa)₂][Cu^ICl₂] (1) and/or [Cu^I(mdpa)₂][Cu^ICl₂] (2) (where, mdpa and bdpa represent methyl and benzyl ester of 3,5-dimethyl pyrazole-1-dithioic acid, respectively) with InCl₃ in a low-temperature solvothermal process. The +1 oxidation state of copper and the atomic ratio Cu to S (1:2) is atomically maintained in the pyrazole-based Cu(I)–S precursor to synthesize phase pure CuInS₂. Coordinating solvents like ethylene diamine (EN) and ethylene glycol (EG) have been used in the synthesis without any surfactants. No use of external surfactants in the synthesis of CIS nanoparticles reveals that precursor acts as stabilizing agent. The synthesized nanocrystals were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), and energy dispersive X-ray spectroscopy (EDX) studies. The optical property of the nanocrystals shows a pronounced quantum confinement effect in the particles with band gap energy ca. 1.5 eV. The formation mechanism of ternary CIS has been proposed. The pore size distributions of the particles show the average pore diameters 13.1 nm from 1 and 5.3 nm from 2. The calculated values of the specific surface area are 8.123 and 9.577 m²/g for 1 and 2, respectively. The excellent photocatalytic degradation of rose bengal (RB) and rhodamine B (RhB) was demonstrated by the porous CIS nanocrystals.

Open image in new window

Graphical abstract Enhanced photocatalytic activity of ternary CuInS₂ nanocrystals synthesized from the combination of a binary Cu(I)S precursor and InCl₃. Gopinath Mondal, Ananyakumari Santra, Sumanta Jana, Nimai Chand Pramanik, Anup Mondal and Pulakesh Bera

     

Antitumour effect of Diospyros cordifolia bark on Ehrlich ascites carcinoma-bearing Swiss albino mice

Diospyros cordifolia Roxb. (Ebenaceae), commonly known as Indian ebony, is used traditionally for several medicinal purposes. In this study, the methanol extract of D. cordifolia bark (MEDC) was evaluated for its antitumour effect against Ehrlich ascites carcinoma (EAC)-bearing Swiss albino mice. Twenty-four hours after intraperitoneal inoculation of tumour (EAC) cells in mice, MEDC was administered intraperitoneally at 25 and 50?mg kg?1 bodyweight for 9 consecutive days. On the 10th day, half of the mice were sacrificed to determine the tumour volume, viable and non-viable tumour cell counts, and rest were kept alive for the assessment of median survival time and increase in life span. Haematological profiles were also determined. MEDC exhibited a marked decrease in tumour growth parameters and increased the survival rate of EAC-bearing animals. MEDC normalised the haematological parameters as compared with the EAC control mice. Therefore, this study demonstrated that D. cordifolia bark possessed remarkable antitumour efficacy.     

Boundaries of Anion/Naphthalenediimide Interactions: From Anion-π Interactions to Anion-Induced Charge-Transfer and Electron-Transfer Phenomena

The recent emergence of anion-π interactions has added a new dimension to supramolecular chemistry of anions. Yet, after a decade since its inception, actual mechanisms of anion-π interactions remain highly debated. To elicit a complete and accurate understanding of how different anions interact with π-electron-deficient 1,4,5,8-naphthalenediimides (NDIs) under different conditions, we have extensively studied these interactions using powerful experimental techniques. Herein, we demonstrate that, depending on the electron-donating abilities (Lewis basicity) of anions and electron-accepting abilities (π-acidity) of NDIs, modes of anion-NDI interactions vary from extremely weak non-chromogenic anion-π interactions to chromogenic anion-induced charge-transfer (CT) and electron-transfer (ET) phenomena. In aprotic solvents, electron-donating abilities of anions generally follow their Lewis basicity order, whereas π-acidity of NDIs can be fine-tuned by installing different electron-rich and electron-deficient substituents. While strongly Lewis basic anions (OH(-) and F(-)) undergo thermal ET with most NDIs, generating NDI(?-) radical anions and NDI(2-) dianions in aprotic solvents, weaker Lewis bases (AcO(-), H(2)PO(4)(-), Cl(-), etc.) often require the photoexcitation of moderately π-acidic NDIs to generate the corresponding NDI(?-) radical anions via photoinduced ET (PET). Poorly Lewis basic I(-) does not participate in thermal ET or PET with most NDIs (except with strongly π-acidic core-substituted dicyano-NDI) but forms anion/NDI CT or anion-π complexes. We have looked for experimental evidence that could indicate alternative mechanisms, such as a Meisenheimer complex or CH···anion hydrogen-bond formation, but none was found to support these possibilities.     

Monotonicity testing and shortest-path routing on the cube

We study the problem of monotonicity testing over the hypercube. As previously observed in several works, a positive answer to a natural question about routing properties of the hypercube network would imply the existence of efficient monotonicity testers. In particular, if any set of source-sink pairs on the directed hypercube (with all sources and all sinks distinct) can be connected with edge-disjoint paths, then monotonicity of functions $f:\{ 0,1\} ^n \to \mathcal{R}$ can be tested with O(n/∈) queries, for any totally ordered range $\mathcal{R}$ . More generally, if at least a µ(n) fraction of the pairs can always be connected with edge-disjoint paths then the query complexity is O(n/(∈µ(n))). We construct a family of instances of Ω(2 ⁿ ) pairs in n-dimensional hypercubes such that no more than roughly a $\frac{1} {{\sqrt n }}$ fraction of the pairs can be simultaneously connected with edge-disjoint paths. This answers an open question of Lehman and Ron [16], and suggests that the aforementioned appealing combinatorial approach for deriving query-complexity upper bounds from routing properties cannot yield, by itself, query-complexity bounds better than ≈ n ^3/2. Additionally, our construction can also be used to obtain a strong counterexample to Szymanski’s conjecture about routing on the hypercube. In particular, we show that for any δ > 0, the n-dimensional hypercube is not $n^{\tfrac{1} {2} - \delta }$ -realizable with shortest paths, while previously it was only known that hypercubes are not 1-realizable with shortest paths. We also prove a lower bound of Ω(n/∈) queries for one-sided non-adaptive testing of monotonicity over the n-dimensional hypercube, as well as additional bounds for specific classes of functions and testers.     

Lag synchronization and scaling of chaotic attractor in coupled system

We report a design of delay coupling for lag synchronization in two unidirectionally coupled chaotic oscillators. A delay term is introduced in the definition of the coupling to target any desired lag between the driver and the response. The stability of the lag synchronization is ensured by using the Hurwitz matrix stability. We are able to scale up or down the size of a driver attractor at a response system in presence of a lag. This allows compensating the attenuation of the amplitude of a signal during transmission through a delay line. The delay coupling is illustrated with numerical examples of 3D systems, the Hindmarsh-Rose neuron model, the Ro?ssler system, a Sprott system, and a 4D system. We implemented the coupling in electronic circuit to realize any desired lag synchronization in chaotic oscillators and scaling of attractors.     

Helical folding in heterogeneous foldamers without inter-residual backbone hydrogen-bonding

This communication describes a set of hybrid foldamers that do not feature inter-residual, but intra-residual backbone hydrogen-bonding, yet adopt a preferentially folded conformation displaying right-handed helical architecture. Conformational ordering is apparently due to the combined conformational restrictions imposed by the conformationally restricted individual amino acid residues with which the oligomers are made of.     

Concomitant synthesis of highly crystalline Zn-Al layered double hydroxide and ZnO: phase interconversion and enhanced photocatalytic activity

Metal oxide/hydroxide with hierarchical nanostructures has emerged as one of the most promising materials for their unique, attractive properties and feasibility of applications in various fields. In this report, a concomitant synthesis of crystalline zinc aluminum layered double hydroxide (ZnAl-LDH) nanostructure and ZnO is presented using Al substrate as template. Studies on interconversion of ZnO to LDH phase in bulk solution under hydrothermal conditions produced Al-doped ZnO (AZO) in one case, and in other, it improves the crystallinity of LDH film templated on Al substrate. In presence of Al salt, the self-limiting growth nature of plate LDH turned to non-self-limiting. Materials obtained during phase transition, AZO in bulk solution and crystalline porous ZnAl-LDH on substrate, have been demonstrated as effective photocatalysts for decomposition of congo red in aqueous medium.