Stereoselective syntheses of polyhydroxylated azepane derivatives from sugar-based epoxyamides. Part 1: synthesis from d-mannose

An approach to the synthesis of polyhydroxyazepane derivatives from sugar-based epoxyamides or epoxyalcohols, in which the total regioselective epoxide opening by nitrogen nucleophiles is the key step, is described. Thus, novel polyhydroxyazepane carboxamides and aminomethyl polyhydroxyazepanes, with potential pharmacological interest, are synthesized from diacetone d-mannose. Configurational assignments of the obtained products were determined.     

Evaluation of the mixed aggregate method as an alternative to the bismuth active substances and cobalt thiocyanate active substances procedures for the determination of nonionic surfactants in raw and treated sewage

The mixed aggregate (MA) method was evaluated for the routine determination of total ethoxylated nonionic surfactants in municipal raw and treated sewage. Nonionics in wastewater samples were enriched with a C8 solid-phase extraction cartridge, eluted with ethyl acetate-methanol, and separated from interferences with stacked strong anionic (quaternary ammonium form) and cationic (benzenesulfonic acid form) exchange columns. Sample extracts were evaporated to dryness and redissolved in distilled water. The total amount of ethoxylates, on a weight basis, was determined by measuring the critical micelle concentration of a mixed micelle made up of ethoxylates and the anionic surfactant sodium dodecyl sulfate, used as the reagent. The dye Coomassie Brilliant Blue G was used as a photometric probe. The minimum amount of ethoxylate required for a single determination was 1 microg. For raw sewage samples, mean recoveries and standard deviations were 98 +/- 6 and 98 +/- 4% at fortification levels of 0.3 and 0.6 microg/mL, respectively. For treated sewage samples, mean recoveries and standard deviations were 95 +/- 2 and 100 +/- 2% at fortification levels of 0.03 and 0.06 microg/mL, respectively. The MA method and the classical bismuth active substances and cobalt thiocyanate active substances procedures were compared. The former offers some significant advantages over the classical procedures in terms of sensitivity, selectivity, precision, simplicity, and rapidity; the type of response is independent of both the molecular weight and the chain length of the surfactant.     

Adhesion Forces between LewisX Determinant Antigens as Measured by Atomic Force Microscopy

No Abstract     

Preparation of porous methacrylate monoliths with oxidized single-walled carbon nanohorns for the extraction of nonsteroidal anti-inflammatory drugs from urine samples

Microchimica Acta - A copolymer was prepared from glycidyl methacrylate, ethylene glycol dimethacrylate and oxidized single-walled carbon nanohorns via photo-polymerization and used in spin columns...     

Evaluation of the performance of single‐walled carbon nanohorns in capillary electrophoresis

This paper describes for the first time the use of single‐walled carbon nanohorns (SWNHs) as pseudostationary and stationary phases for EKC and CEC, respectively, taking advantage of their characteristic features, such as conical‐end termination, formation of spherical assemblies dahlia‐flower like superstructure and easy functionalization. The use of SWNHs as pseudostationary phase for EKC required the study of their dispersion in different surfactants as well as their compatibility with the electrophoretic system. The carboxylation and subsequent immobilization of carboxylated SWNHs in fused‐silica capillary to obtain useful, reproducible and stable stationary phases for CEC has also been investigated, with promising results. The electrophoretic separations obtained for water‐soluble vitamins in both modalities (EKC and CEC) have been systematically compared with those obtained with single‐walled carbon nanotubes.     

Tetrahydrofuran–water extraction,in-line clean-up and selective liquid chromatography/tandem mass spectrometry for the quantitation of perfluorinated compounds in food at the low picogram per gram level

A new solvent extraction system was developed for extraction of PFCs from food. The extraction is carried out with 75:25 (v/v) tetrahydrofuran:water, a solvent mixture that provides an appropriate balance of hydrogen bonding, dispersion and dipole–dipole interactions to efficiently extract PFCs with chains containing 4–14 carbon atoms from foods. This mixture provided recoveries above 85% from foods including vegetables, fruits, fish, meat and bread; and above 75% from cheese. Clean-up with a weak anion exchange resin and Envi-carb SPE, which were coupled in line for simplicity, was found to minimize matrix effects (viz. enhancement or suppression of electrospray ionization). The target analytes (PFCs) were resolved on a perfluorooctyl phase column that proved effective in separating mass interferences for perfluorooctane sulfonate (PFOS) in fish and meat samples. The mass spectrometer was operated in the negative electrospray ionization mode and used to record two transitions per analyte and one per mass-labeled method internal standard. The target PFCs were quantified from solvent based calibration curves. The limits of detection (LODs) were as low as 1–5 pg analyte g⁻¹ food; by exception, those for C₄ and C₅ PFCs were somewhat higher (25–30 pg g⁻¹) owing to their less favourable mass response. To the best of our knowledge these are among the best LODs for PFCs in foods reported to date. The analysis of a variety of foods revealed contamination with PFCs at levels from 4.5 to 75 pg g⁻¹ in 25% of samples (fish and packaged spinach). C₁₀–C₁₄ PFCs were found in fish, which testifies to the need to control long-chain PFCs in this type of food. The proposed method is a useful tool for the development of a large-scale database for the presence of PFCs in foods.     

Single-walled carbon nanohorns immobilized on a microporous hollow polypropylene fiber as a sorbent for the extraction of volatile organic compounds from water samples

We have evaluated the behavior of single-walled carbon nanohorns as a sorbent for headspace and direct immersion (micro)solid phase extraction using volatile organic compounds (VOCs) as model analytes. The conical carbon nanohorns were first oxidized in order to increase their solubility in water and organic solvents. A microporous hollow polypropylene fiber served as a mechanical support that provides a high surface area for nanoparticle retention. The extraction unit was directly placed in the liquid sample or the headspace of an aqueous standard or a water sample to extract and preconcentrate the VOCs. The variables affecting extraction have been optimized. The VOCs were then identified and quantified by GC/MS. We conclude that direct immersion of the fiber is the most adequate method for the extraction of VOCs from both liquid samples and headspace. Detection limits range from 3.5 to 4.3 ng L^?1 (excepted for toluene with 25 ng L^?1), and the precision (expressed as relative standard deviation) is between 3.9 and 9.6 %. The method was applied to the determination of toluene, ethylbenzene, various xylene isomers and styrene in bottled, river and tap waters, and the respective average recoveries of spiked samples are 95.6, 98.2 and 86.0 %.

Alcohol and metal determination in alcoholic beverages through high-temperature liquid-chromatography coupled to an inductively coupled plasma atomic emission spectrometer

In the present work, an inductively coupled plasma atomic emission spectrometry (ICP-AES) system was used as a high temperature liquid chromatography (HTLC) detector for the determination of alcohols and metals in beverages. For the sake of comparison, a refractive index (RI) detector was also employed for the first time to detect alcohols with HTLC. The organic compounds studied were methanol, ethanol, propan-1-ol and butan-1-ol (in the 10-125 mg/L concentration range) and the elements tested were magnesium, aluminum, copper, manganese and barium at concentrations included between roughly 0.01 and 80 mg/L. Column heating temperatures ranged from 80 to 175 °C and the optimum ones in terms of peak resolution, sensitivity and column lifetime were 125 and 100 °C for the HTLC-RI and HTLC-ICP-AES couplings, respectively. The HTLC-ICP-AES interface design (i.e., spray chamber design and nebulizer type used) was studied and it was found that a single pass spray chamber provided about 2 times higher sensitivities than a cyclonic conventional design. Comparatively speaking, limits of detection for alcohols were of the same order for the two evaluated detection systems (from 5 to 25 mg/L). In contrast, unlike RI, ICP-AES provided information about the content of both organic and inorganic species. Furthermore, temperature programming was applied to shorten the analysis time and it was verified that ICP-AES was less sensitive to temperature changes and modifications in the analyte chemical nature than the RI detector. Both detectors were successfully applied to the determination of short chain alcohols in several beverages such as muscatel, pacharan, punch, vermouth and two different brands of whiskeys (from 10 to 40 g of ethanol/100 g of sample). The results of the inorganic elements studied by HTLC-ICP-AES were compared with those obtained using inductively coupled plasma mass spectrometry (ICP-MS) obtaining good agreement between them. Recoveries found for spiked samples were close to 100% for both, inorganic elements (with both HLTC-ICP-AES and ICP-MS) and alcohols (with both HTLC-ICP-AES and HTLC-RI hyphenations).     

Small molecule fluorescent probes for the detection of amyloid self-assembly in vitro and in vivo

The misfolding and aggregation of amyloidogenic polypeptides are characteristics of many neurodegenerative syndromes including Alzheimer's and Parkinson's disease. There is a major interest in the availability of amyloid-specific probes that exhibit fluorescence properties, for its use as reporters of protein aggregation in spectroscopy and microscopy methodologies. In this review, we intend to provide an overview of novel fluorescence-based probes and procedures applied for addressing fundamental aspects of amyloid self-assembly in vitro and in vivo. We highlight the utilization in vitro of several small-molecule fluorescent probes as extrinsic and site-specific reporters of amyloid formation, including single-molecule determinations. Detection of amyloid self-assembly employing compounds such as JC-1, DCVJ, ANS derivatives and luminescent conjugated polymers, as well as site-specific probes such as pyrene and ESIPT is discussed. We further review novel fluorescent probes developed for the non-invasive optical imaging of protein aggregates in vivo, including BTA-1, Methoxy-X04, NIAD-4 and CRANAD-2. Availability of increasingly versatile amyloid-specific fluorescent probes is having a very positive impact in the drug discovery and diagnostics fields.     

Kinetic wavelength-pair method as an alternative approach to simultaneous multi-component analysis

The kinetic wavelength-pair method involves adapting a well established principle to the simultaneous kinetic-based determination of two or more compounds with diode-array detection. It relies on measuring the difference in the rate of change of the absorbance with time at two preset wavelength pairs such that the values of these measuring parameters are the result of the contribution of one or two components. The theoretical basis adapted to first-order kinetic-based determinations was established and checked on four systems. The method thus developed was compared with other differential kinetic methods and applied to the resolution of formaldehyde-acrolein mixtures.