The modification and characterization of maleic anhydride-styrene-methyl metacrylate terpolymer by poly(ethylene adipate)

In this study, the functionality of maleic anhydride was utilized in the maleic anhydride-styrene-methyl metacrylate (MAStMMA) terpolymer. First, the polyester of poly(ethylene adipate), PEA, polycondensation copolymer was synthesized from ethylene glycol and adipic acid monomers. PEA was then modified on its maleic anhydride units in the MAStMMA terpolymer which has been synthesized previously. This modified copolymer was characterized by FTIR (Fourier Transform Infrared spectroscopy). The viscosimetric and thermomechanical characterization of MAStMMA terpolymer and its modified copolymer were also performed and the results were compared. The modified copolymer obtained was found to be more elastic and more soluble, and had lower viscosity and density.     

bis(nicotinamide) and bis(N,N-diethyl nicotinamide) p-hydroxybenzoate complexes of Ni(II), Cu(II) AND Zn(II)

The mixed-ligand p-hydroxybenzoate complexes of Ni(II), Cu(II) and Zn(II) with nicotinamide and N,N-diethylnicotinamide were synthesized and characterized by elemental analysis, magnetic susceptibility measurements and mass spectrometry. The thermal behavior of the complexes was studied by simultaneous TG, DTG and DTA methods in static air atmosphere. The infrared spectral characteristics of the complexes are also discussed. The complexes contain two water molecules, two p-hydroxybenzoato (p-hba) and two nicotinamide (na) (or diethylnicotinamide (dena)) ligands per formula unit. In these complexes, all ligands are coordinated to the metal ion as monodendate ligands. In Zn(II)-na and Cu(II)-dena complexes, thep-hydroxybenzoate behaves as bidentate chelating ligand through carboxylic oxygen atoms. The decomposition pathways and the stability of the complexes are interpreted in the terms of the structural data. The final decomposition products were found to be the respective metal oxides. This revised version was published online in July 2006 with corrections to the Cover Date.     

Titanocene-catalyzed cascade cyclization of epoxypolyprenes: straightforward synthesis of terpenoids by free-radical chemistry

The titanocene-catalyzed cascade cyclization of epoxypolyenes, which are easily prepared from commercially available polyprenoids, has proven to be a useful procedure for the synthesis of C(10), C(15), C(20), and C(30) terpenoids, including monocyclic, bicyclic, and tricyclic natural products. Both theoretical and experimental evidence suggests that this cyclization takes place in a nonconcerted fashion via discrete carbon-centered radicals. Nevertheless, the termination step of the process seems to be subjected to a kind of water-dependent control, which is unusual in free-radical chemistry. The catalytic cycle is based on the use of the novel combination Me(3)SiCl/2,4,6-collidine to regenerate the titanocene catalyst. In practice this procedure has several advantages: it takes place at room temperature under mild conditions compatible with different functional groups, uses inexpensive reagents, and its end step can easily be controlled to give exocyclic double bonds by simply excluding water from the medium.     

MICELLIZATION STUDIES OF DODECYL BENZENESULFONIC ACID AND ITS INTERACTION WITH POLYVINYLPYRROLIDONE

Dodecyl benzenesulfonic acid (DBSA) surfactant was used in the present study to find the effect of concentration on its electrical conductance in solution from 293-323K above and below the critical micelle concentration (CMC). The micellization parameters i.e. degree of counter ion binding (β), aggregation number (n) and number of counter ion micelle(m) were measured. The interaction of DBSA with polyvinylpyrrolidone (PVP) was also studied at 293K throughconductance and surface tension measure ments. A number of important parameters i.e. critical aggregation concentration (CAC), Gibb‘s free energy (△G) and binding ratio (R) were determined and the effect of NaCl on the CAC and polymer saturation point (PSP) was also investigated.     

Studies on indian medicinal plants-XLIV: Solanoforthine,a new steroidal alkaloid from solanum seaforthianum. a note on the mass spectrum of solanocapsine

The structure of solanoforthine, m.p. 208–10°, [α]_D- 26.6°, a new steroidal alkaloid isolated from Solanum seaforthianum Andr., has been established as 3β-amino-22,26-epimino-16α,23-epoxy-22αH,25βH-cholest- 5- en -23β - ol 3, based on chemical and spectroscopic evidence and by its reduction to solanocapsine 2, another steroidal alkaloid encountered in the same species. The mass spectra of2 and 3 are discussed.     

Novel application of quantum chemical investigation in terms of substituent parameters: Statistical comparison of dual and single substituent parameter treatments

The correlation analysis of Mulliken charge (Q_M) calculated by using density functional theory (B3LYP/STO-3G) calculations of 1-(4-azido-5-hydroxymethyl-tetrahydro-selenophen-2-ylmethyl)-5-substituted-1H-pyrimidine-2,4-dione, were done by using mono substituent parameter (Hammett’s model), and dual substituent parameter (Taft’s, Reynolds’, and Swain’s models). The dual substituent parameter correlations of the Q_M data gave no significant improvement over single parameter correlations, the best correlation observed with the Taft’s Model as compared with the Swain’s and Reynolds’ Models, respectively. The correlation analysis of Mulliken charge can be used successfully to demonstrate the existence or absence of the interaction between the oxygen of the carbonyl group and selenium atom.     

Enantioselective synthesis of functionalized γ-butyrolactones

Sharpless asymmetric dihydroxylation and aminohydroxylation of (E)-dimethyl-2-alkylidene glutarates 2 were shown to afford enantio-enriched or enantiopure highly functionalized γ-butyrolactones 3 and 7.     

Single nanocrystal arrays on patterned poly(ethylene glycol) copolymer microstructures using selective wetting and drying

Single nanocrystal arrays were fabricated on sub-microwells of poly(ethylene glycol) (PEG) copolymer using selective wetting on the hydrophilic regions of the exposed substrate surface and subsequent drying. Templates were produced by molding a thin film of a PEG-based random copolymer on hydrophilic substrates such as glass or silicon dioxide. The polymeric microstructures provide a topographical barrier around the well, which makes it possible to create nanocrystal arrays with controlled geometrical features. The size of the nanocrystal was found to decrease with decreasing well size and also decrease with decreasing topological height. A simple empirical equation was derived to predict the size of the crystal as a function of the pattern size and height, which is in good agreement with the experimental data.     

Densities,Ultrasonic Speeds,Viscosities and Refractive Indices of Binary Mixtures of Benzene with Benzyl Alcohol,Benzonitrile, Benzoyl Chloride and Chlorobenzene at 303.15 K

Densities,ρ, ultrasonic speeds, u, viscosities,η, and refractive indices, n, of pure benzene, benzyl alcohol (BA), benzonitrile (BN), benzoyl chloride (BC), chlorobenzene (CB) and their thirty six binary mixtures, with benzene as common component, were measured at 303.15 K over the entire mole fraction range. From these experimental data the values of deviations in ultrasonic speed, △u, isentropic compressibility, △k_s,excess acoustic impedance, Z^E, deviation in viscosity, Dh, and excess Gibbs free energy of activation of viscous flow, G^*E, and partial molar isentropic compressibility, Kφ,2⁰ of BA, BN, BC and CB in benzene were computed. The variation of these derived functions with composition of the mixtures suggested the increased cohesion (molecular order) in the solution and that interaction (A-B)＞(A-A) or (B-B).Moreover, theoretical prediction of ultrasonic speed, viscosity and refractive index of all the four binary mixtures was made on the basis of empirical and semi-empirical relations by using the experimental values of the pure components. Comparison of theoretical results with the experimental values was made in order to assess the suitability of these relations in reproducing the experimental values of u, η and n. Also, molecular radii of pure liquids and the average molecular radii of binary mixtures were evaluated using the corresponding refractive indices of pure liquids and binary mixtures. The average molecular radii of binary mixtures were found to be additive with respect to mole fraction of the pure component.     

Ion exchangers as catalysts. II. Catalytic decomposition of hydrogen peroxide with resin-ethylenediamine-copper(II) complex ions

Summary The slow decomposition of H₂O₂ in the presence of Dowex-50 W resin in the form of an ethylenediaminecopper(II) complex ion in water is accompanied by an induction period. The reaction is first order with respect to [H₂O₂] and the rate constant (perg of dry resin) was deduced. Autocatalytic behaviour was found for the H₂O₂ decomposition with 2% crosslinked divinylbenzene. The induction period disappeared and the reaction rate increased when the decomposition was carried out with a resin in the form of a peroxo-copper complex, which proves that the formation of an intermediate (active species) retards the reaction rate. The precursor of the active species, formed during the induction period, was not the amine-copper(II) complex ion but a product of the latter with H₂O₂. It proved impossible to carry out the decomposition in acid or buffer solutions, in which the resin is regenerated.