Cu+(H2) and Na+(H2) adducts in exchanged ZSM-5 zeolites

Cu(I) ions in Cu-ZSM-5 form Cu+(H2) complexes, stable at room temperature and sub-atmospheric H2 pressure, which do not have any homogeneous analogue except for matrix-isolated [Cu(eta2-H2)Cl]. Comparison with the unstable Na+(H2) adducts formed in the parent Na-ZSM-5 zeolite allow the conclusion that the Cu(I)/H2 bond is governed by sigma-pi overlap forces.     

Metal Oxoclusters as Molecular Building Blocks for the Development of Nanostructured Inorganic–Organic Hybrid Thin Films

Silica-based inorganic–organic hybrid thin films embedding the organically modified oxohafnium clusters (Hf₄O₂(OMc)₁₂, OMc=OC(O)–C(CH₃)=CH₂) were obtained by photo-activated free radical copolymerisation of the methacrylate groups of the cluster with those of the pre-hydrolysed (methacryloxypropyl)trimethoxysilane (MAPTMS, (CH₂=C(CH₃)C(O)O)(CH₂)₃Si(OCH₃)₃). By this route, a covalent anchoring of the cluster to the forming silica network was achieved. Samples characterized by two different Si/Hf compositions (18:1, 5:1) were prepared. The surface and in-depth composition of the thin films were investigated through Fourier transform infrared spectroscopy (FT-IR) and X-ray photoelectron spectroscopy (XPS). XPS depth profiles performed on the thin layers evidenced a homogenous in depth distribution of the hafnium guest species within the whole silica films and sharp film-substrate interfaces. Broad band dielectric spectroscopy (BDS) measurements permitted to investigate the electric response of the obtained films in the frequency and temperature range of 40 Hz – 1 MHz and 0–160°C.     

The fluorescence of biliverdin dimethyl ester

Freshly prepared solutions of biliverdin dimethyl ester ( 2 ) in ethanol showed fluorescence maxima at 710 and 770 nm [Φ_F = 1.1. 10^?4 (room temperature) and 5.0 10^?4 (77 K)]. The maxima of monoprotonated 2 at 77 K were shifted to 725 and 806 nm and the quantum yield was increased to 2.6. 10^?2. This acid effect was reversible by neutralization with base. When a neutral solution was kept standing in the dark at room temperature, or when an acidic solution was neutralized by base, an additional fluorescence maximum at 500 nm with a mirror image excitation spectrum with λ_max = 470 nm developed, which disappeared on addition of acid and which is attributed to a chemical change of 2 .     

Photocatalytic TiO2 Coatings: Effect of Substrate and Template

Summary. Transparent TiO₂ films with a high photodegradation activity towards an azo dye in aqueous solution were prepared by sol–gel processing. Films on soda–lime glass supports protected with a thin silica barrier layer exhibited better crystallization and monodisperse nanoparticles, higher absorption of light below 370 nm, and higher photocatalytic activity than those films deposited on bare glass supports proving the detrimental effect of interdiffused sodium ions on the development of the anatase nanostructure. The effect of substrate was more pronounced in thinner films (300 nm) than in thicker ones (1200 nm), which were achieved by adding a template (i.e. Pluronic F127) to the sol.     

EFFECTS OF BOUND MONOCLONAL ANTIBODIES ON THE DECAY OF THE PHOTOTRANSFORMATION INTERMEDIATES I1,21700 FROM NATIVE Avena PHYTOCHROME*

Abstract–Thc kinetics of the microsecond phototransformation intermediates of 124 kDa Avena phytochrome (1700^1,2) were studied in the prcsence of bound monoclonal antibodies at various temperatures. A global analysis was applied to the decays at all wavelengths at each temperature in order to derive the rate constants and the decay-associated spectra of the three decay components. Monoclonal antibodies bound to specific epitopes altered the Arrhenius parameters of both 1700^1,2 decay components. The strongest influence on these parameters was observed with OAT 8 (epitope between residues 624 and 686), which decreased by more than 50% the activation parameters of both components. This decrease is interpreted to result from an increased flexibility induced by this antibody in the ground state or in the transition state of bonds changing during the decay of both 1700 transients. Thus, the OAT 8 cpitope appears to be functionally important during the decay of the 1700^1,2 intermediates. For the case of 1100¹ bound OAT 23 and OAT 25 (epitopes between residues 1 and 66) reduced even further the relatively small flexibility of these bonds in the red light-absorbing form of phytochrome (P1) without antibodies, as reflected by the high preex-ponential factors for its decay. This resulted also in higher activation energies for this decay in the presence of the antibodies. Thus, the amino-terminus should act as a rigid spacer of the chromophore cavity without affecting it during the microsecond transformation, because the Arrhenius parameters for these decays are similar to those for small phytochrome. The possible implications of the influence of the various antibodies on the bleaching remaining after the decay of 1700^1,2 are discussed.     

Aged titania nanoparticles: the simultaneous control of local and long-range properties

TiO(2) nanoparticles are obtained by combining a sol-gel preparative route with hydrothermal aging steps, performed in mild conditions, of varying time lengths. Both aged and un-aged samples are thermally treated at 300 and 600 degrees C, for the same length of time. The crystal structures, the phase composition, and crystallite sizes are analyzed by powder X-ray diffraction. Raman spectra of anatase nanocrystals with average sizes of 7-10 nm are reported and the correlation between the Raman band shape of the main feature at 144 cm(-1) and the crystallite size is discussed. Nitrogen physisorption by Brunauer-Emmett-Teller (BET) method is adopted to evaluate the particles surface area and mesopore size and size distribution. The role played by the hydrothermal step in affecting the physicochemical properties of the powders is discussed also with respect to the H(2)O/TiO(2) interactions as apparent from Raman spectroscopy investigations of the O-H stretching range (3000-3800 cm(-1)).     

Influence of the preparation procedure on the properties of polyaniline based magnetic composites

A versatile process for the preparation of composite films consisting of magnetite (Fe₃O₄) nanoparticles embedded in a polyaniline (PANI) matrix is reported. Spectroscopic properties of polyaniline matrix (PANI-EB), polyaniline protonated with camphor sulfonic acid (PANI-CSA_0.5) PANI-ES and PANI/Fe₃O₄-CSA_0.5 composites were studied, both in the state of the solutions of m-cresol and in thin films processed from the same solvents. The results of these studies indicate that m-cresol can be used for PANI/Fe₃O₄ composite preparation. Such films show both reasonably high electrical conductivity and magnetic permeability. A controlled application of a magnetic field during the casting process resulted in the formation of the materials with an unusual combination of magnetic and transport properties. The obtained films show the behavior that can be explained by the presence of both ferromagnetic and paramagnetic phases. The superparamagnetic contribution, if any, is very small. Application of the external magnetic field during fabrication of the composites stimulates creation of the aggregates of magnetic particles which, although keeps conductivity at a relatively high level, leads to a small decrease of the conductivity value.     

Stereochemical analysis of 3,4-methylenedioxymethamphetamine and its main metabolites by gas chromatography/mass spectrometry

3,4-Methylenedioxymethamphetamine (MDMA, ecstasy) is consumed as the racemate but some metabolic steps are enantioselective. In addition, chiral properties are preserved during MDMA biotransformation. A quantitative analytical methodology using gas chromatography/mass spectrometry (GC/MS) to determine enantioselective disposition in the body of MDMA and its main metabolites including 3,4-methylenedioxyamphetamine (MDA), 4-hydroxy-3-methoxymethamphetamine (HMMA), and 4-hydroxy-3-methoxyamphetamine (HMA) was developed. Plasma and urine samples were collected from a male volunteer. The analysis of MDMA, MDA, and 4-hydroxy-3-methoxy metabolites by GC/MS required a two-step derivatization procedure. The first step consisted of derivatization of the amine with enantiomerically pure Mosher's reagent ((R)-MTPCl). Triethylamine was used as a base to neutralize hydrochloric acid formed during the reaction allowing quantitative derivatization, which resulted in a substantial improvement in the sensitivity of the method compared with other previously described techniques. Further treatment with ammonium hydroxide was required since both amine and hydroxyl groups underwent derivatization in the reaction. Ammonium hydroxide breaks bonds formed with hydroxyl groups without affecting amine derivatives. The second derivatization step using hexamethyldisilazane was needed for metabolites containing phenol residues. This derivatization method permitted the stereochemically specific study of MDMA and its main monohydroxylated metabolites by GC/MS. A detailed study of the chemical reactions involved in the derivatization steps was indispensable to develop a straightforward, sensitive, and reproducible method for the analysis of the parent drug compound and its metabolites.     

Investigation of catalytic activities by differential thermal analysis

A calorimetric method is proposed to evaluate the catalytic activity of a solid catalyst with respect to the exothermic oxidation of Volatile Organic Compounds (VOC).This method employs a differential thermal analyzer in which an inert reference and a catalytically active sample are both fluxed at a constant rate with a reactive gaseous mixture composed of an inert gas (N₂ 90% vol.), oxygen and VOC, the last typically 900 to 5000 ppm. While the temperature is varied according to a predefined cycle, the output signal due to the exothermic reaction on the catalyst is continuously recorded. The design of the test chamber, the amount of catalyst, the shape of the holders and finally the flow rate and composition of the gaseous mixture should be carefully selected in order to achieve reproducible results.     

Gas chromatographic--mass spectrometric determination of phenylacetic acid in human blood

Phenyl acetic acid, a metabolite of 2-phenyl ethylamine, acts as a neuromodulator in the nigrostriatal dopaminergic pathway stimulating the release of dopamine. The evaluation of phenyl acetic acid concentration in the biological fluid reflects phenyl ethylamine levels thus allowing the assessment of the modulatory role of this endogenous substance. Changes in biological fluids levels of 2-phenylethylamine and/or in its metabolite have been reported in affective disorders, such as depression and schizophrenia. Recently, the occurrence of the "attention deficit hyperactivity syndrome" has been frequently reported in childhood population and involvement of dopaminergic dysfunction in this disease has been suspected. A fast, reliable and reproducible method for the determination of phenyl acetic acid in human blood, is therefore needed in order to have a screening tool for monitoring both healthy childhood population and suspected "attention deficit hyperactivity syndrome" patients. The gas chromatographic-mass spectrometric method here described makes use of a deuterated internal standard in order to overcome problems related to the lack of reproducibility often encountered when a derivatization step is performed.