LC Method for Studies on the Stability of Sibutramine in Soft Gelatin Capsules

A sensitive and rapid liquid chromatographic method was successfully developed and validated for the determination of sibutramine hydrochloride in bulk and capsules. Sibutramine in the presence of its degradation products was analyzed using UV detection at 225 nm. Chromatography was performed on a reversed-phase C₈ (150 × 4.0 mm I.D., 5 μm) analytical column under isocratic conditions. The mobile phase was composed of acetonitrile:water (aqueous phase containing 0.3% triethylamine and pH adjusted to 7.0) (75:25, v/v) at a flow-rate of 1.1 mL min⁻¹. No chromatographic interference was found during the analysis. Light was the stress condition which most contributed to sibutramine degradation. The method showed a linear response (r > 0.999) from 30 to 90 μg mL⁻¹. The mean recovery for capsules was 101.2%. Inter-day assays showed relative standard deviations of 0.42 and 1.62% for bulk and capsules, respectively. The developed method is able to separate sibutramine from its major degradation products and it may be used in the quality control of this active pharmaceutical ingredient in both bulk and capsules.

     

Structural studies of cyclic ureas: 3. Enthalpy of formation of barbital

A thermochemical and thermophysical study has been carried out for crystalline barbital [5,5′-diethylbarbituric acid]. The thermochemical study was made by static bomb combustion calorimetry, from which the standard () molar enthalpy of formation of the crystalline barbital, at T = 298.15 K, was derived as −(753.0 ± 1.8) kJ · mol⁻¹. The thermophysical study was made by differential scanning calorimetry over the temperature interval (265 to 470) K. A solid–solid phase transition was found at T = 413.3 K. The vapour pressures of the crystalline barbital were measured at several temperatures between T = (355 and 377) K, by the Knudsen mass-loss effusion technique, from which the standard molar enthalpy of sublimation, at T = 298.15 K was derived as (117.3 ± 0.6) kJ · mol⁻¹. The combination of the experimental results yielded the standard molar enthalpy of formation of barbital in the gaseous phase, at T = 298.15 K, as −(635.8 ± 1.9) kJ · mol⁻¹. This value is compared and discussed with our theoretical calculations by several methods (Gaussian-n theories G2 and G3, complete basis set CBS-QB3, density functional B3P86 and B3LYP) by means of atomization and isodesmic reaction schemes.     

Digital image-based flame emission spectrometry

A digital image-based flame emission spectrometric (DIB-FES) method for the quantitative chemical analysis is proposed here for the first time. The DIB-FES method employs a webcam to capture the digital images which are associated to a radiation emitted by the analyte into an air-butane flame. Since the detection by webcam is based on the RGB (red-green-blue) colour system, a novel mathematical model was developed in order to build DIB-FES analytical curves and estimate figures of merit for the proposed method. In this approach, each image is retrieved in the three R, G and B individual components and their values were used to define a position vector in RGB three-dimensional space. The norm of this vector is then adopted as the RGB-based value (analytical response) and it has revealed to be linearly related to the analyte concentration. The feasibility of the DIB-FES method is illustrated in three applications involving the determination of lithium, sodium and calcium in anti-depressive drug, physiological serum and water, respectively. In comparison with the traditional flame emission spectrometry (trad-FES), no statistic difference has been observed between the results by applying the paired t-test at the 95% confidence level. However, the DIB-FES method has offered the largest sensitivities and precision, as well as the smallest limits of detection and quantification for the three analytes. These advantageous characteristics are attributed to the trivariate nature of the detection by webcam.     

An aqueous two-phase system as a strategy for serum albumin depletion

An aqueous two-phase system, based on the cloud point phenomenon, was proposed for blood plasma albumin depletion prior to gel electrophoresis (SDS-PAGE) analysis. Albumin removal was evaluated using a mixture of Triton^® X-114 and SDS. Variables affecting phase separation and the partition coefficient (K), such as pH (from 5.0 to 7.6) and salt composition, were first optimized to carry out phase separation at room temperature and to promote albumin removal (15 min with ca. 95% efficiency) to the surfactant-rich phase, in a global process that results in reduction of 12% α-helix structures, confirmed through circular dichroism analysis. Gel electrophoresis analyses were carried out to compare crude human plasma composition with human plasma submitted to the cloud point procedure as well as the same plasma submitted to the separation of albumin using a commercially available system based on a chromatographic affinity column. The cloud point extraction procedure allowed identification of 18 protein bands present in the surfactant-poor phase, resulting in a more detailed electrophoretic profile, when compared with crude plasma (10 protein bands).     

Optical fiber biosensor coupled to chromatographic separation for screening of dopamine, norepinephrine and epinephrine in human urine and plasma

An optical fiber biosensor has been developed for the determination of catecholamines (dopamine, norepinephrine and epinephrine) based on the recognition capacity of the enzyme laccase. In this study, a glass tube constituted by a fused silica fiber coated with a film of polystyrene/divinylbenzene resin (PS/DVB) was used for catecholamines separation. Firstly, the analyzer was tested for calibration and its analytical performance for catecholamines detection was compared with a classical analytical method, namely high performance liquid chromatography-electrochemical detector (HPLC-ED). The developed analytical device shows a high potential for catecholamines quantification with a detection limit of 2.1, 2.6 and 3.4 pg mL⁻¹ for dopamine, norepinephrine and epinephrine, respectively. The analytical sensitivity, inferred from the slope of the calibration curves established for a range of concentrations between 5 and 125 pg mL⁻¹, was found to be 0.344, 0.252 and 0.140 dB/pg mL⁻¹ for dopamine, norepinephrine and epinephrine, respectively. Furthermore, catecholamines speciation with the PS/DVB fiber was completely achieved in 3 min. The analytical performance of the reported sensor was also evaluated and found adequate for catecholamines determination in human urine and plasma samples.     

In vitro photodynamic activity of chloro(5,10,15,20-tetraphenylporphyrinato)indium(III) loaded-poly(lactide-co-glycolide) nanoparticles in LNCaP prostate tumour cells

In(III)-meso-tetraphenylporphyrin (InTPP) was encapsulated into nanoparticles (smaller than 200 nm) of poly(d,l-lactide-co-glycolide) (PLGA) using the emulsification–evaporation technique. The photodynamic efficacy of InTPP-loaded nanoparticles and its cellular uptake was investigated with LNCaP prostate tumour cells, in comparison with the free InTPP. The effects of incubation time (1–3 h), drug concentration (1.8–7.7 μmol/L) and incident light dose (15–45 J/cm²) with both encapsulated and free InTPP were studied. The type of cell death induced by the photochemical process using both encapsulated and free InTPP was also investigated. Cell viability was reduced more significantly with increasing values of these effects for InTPP-loaded nanoparticles than with the free drug. The cellular death induced by both encapsulated and free InTPP was preponderantly apoptotic. Confocal laser scanning microscopy data showed that the InTPP-loaded nanoparticles, as well free InTPP, were localized in the cells, and always in the perinuclear region. Encapsulated InTPP was measured by the intensity of fluorescence intensity of cell extracts and was three times more internalized into the cells than was the free InTPP. Electron paramagnetic resonance experiments corroborated the participation of singlet oxygen in the photocytotoxic effect of nanoparticles loaded with InTPP.     

Energetics of some sulphur heterocycles

The present work is part of a broader research program on the energetics of formation of heterocycles, aiming the study of the enthalpic effects of the introduction of different substituents into heterocycles. In this work we present the results of the thermochemical research on sulphur heterocycles of the type substituted thiophenes with different kind of substituents, mainly alkyl, ester, acetyl, carboxamide, acetamide, carbonitrile and carboxaldehyde. The standard (p ^o=0.1 MPa) molar enthalpies of formation, in the condensed phase, at T=298.15 K, of a large number of substituted thiophenes, were derived from their standard massic energies of combustion, measured by rotating-bomb combustion calorimetry, while the standard molar enthalpies of vaporization or sublimation of those compounds were obtained either by high temperature Calvet Microcalorimetry, or by the temperature dependence of their vapour pressures determined by the Knudsen effusion technique. The standard molar enthalpies of formation, of the studied sulphur heterocycles in the gaseous phase, were then derived. The results are interpreted in terms of structural contributions to the energetics of the substituted thiophenes, the internal consistency of the results is discussed and, whenever appropriate and possible, empirical correlations are suggested for the estimation of standard molar enthalpies of formation, at T=298.15 K, of substituted thiophenes. A Table of enthalpic increments for different group substituents in positions 2 or 3 of the thiophene ring has been established.     

Influence of the thermal treatment in the crystallization of NiWO4 and ZnWO4

NiWO₄ and ZnWO₄ were synthesized by the polymeric precursor method at low temperatures with zinc or nickel carbonate as secondary phase. The materials were characterized by thermal analysis (TG/DTA), infrared spectroscopy, UV–Vis spectroscopy and X-ray diffraction. NiWO₄ was crystalline after calcination at 350 °C/12 h while ZnWO₄ only crystallized after calcination at 400 °C for 2 h. Thermal decomposition of the powder precursor of NiWO₄ heat treated for 12 h had one exothermic transition, while the precursor heat treated for 24 h had one more step between 600 and 800 °C with a small mass gain. Powder precursor of ZnWO₄ presented three exothermic transitions, with peak temperatures and mass losses higher than NiWO₄ has indicating that nickel made carbon elimination easier.