Small-angle x-ray scattering from solution of rodlike particles with length distribution

The scattering function of rods with a constant radius, 8 Å, and a length distribution of the Schulz–Zimm type was calculated on a computer as a model of helical synthetic polypeptide. The influence of length and length distribution on the scattered intensity of small-angle x-ray scattering was clarified. As length grows and length distribution broadens it is difficult to obtain reliable values of molecular weight and radius of gyration from a Zimm plot. The influence of length distribution on the mass per unit length, M_q, and the radius of gyration of the cross section, 〈S〉^1/2, from the Guinier plot of the cross-sectional factor decreases as the length increases, and reliable values of M_q and 〈S〉^1/2 can be obtained even for rods with wide distribution for rods more than 600 Å long. In particular, it is pointed out that the value of 〈S〉^1/2 is little influenced by length and length distribution.     

Cytotoxic diterpenoids from Vietnamese medicinal plant Croton tonkinensis GAGNEP

Six new ent-kaurane-type diterpenoids were isolated from the leaves of the endemic Vietnamese medicinal plant Croton tonkinensis GAGNEP. (Euphorbiaceae) together with three known ent-11alpha-acetoxy-7beta,14alpha-dihydroxykaur-16-en-15-one (1), ent-kaur-16-en-15-one 18-oic acid (5) and ent-18-hydroxykaur-16-ene (7). Their structures were determined by spectroscopic analyses to be ent-7beta-acetoxy-11alpha-hydroxykaur-16-en-15-one (2), ent-18-acetoxy-11alpha-hydroxykaur-16-en-15-one (3), ent-11alpha-acetoxykaur-16-en-18-oic acid (4), ent-15alpha,18-dihydroxykaur-16-ene (6), ent-11alpha,18-diacetoxy-7beta-hydroxykaur-16-en-15-one (8), and ent-(16S)-1alpha,14alpha-diacetoxy-7beta-hydroxy-17-methoxykauran-15-one (14). ent-Kaurane-type diterpenoids from Croton tonkinensis 2-4, 6, and 9-13, were tested for toxicity in the brine shrimp lethality assay. Compounds 9, 10, and 12 demonstrated significant activity, compounds 2, 3, 6, and 11 showed weak activity, and compounds 4 and 13 were inactive.     

Stereospecific polymerization of isobutyl vinyl ether. III. Polymerization with VCl3 • LiCl

The polymerization of isobutyl vinyl ether by vanadium trichloride in n-heptane was studied. VCl₃ ? LiCl was prepared by the reduction of VCl₄ with stoichiometric amounts of BuLi. This type of catalyst induces stereospecific polymerization of isobutyl vinyl ether without the action of trialkyl aluminum to an isotactic polymer when a rise in temperature during the polymerization was depressed by cooling. It is suggested that the cause of the stereospecific polymerization might be due to the catalyst structure in which LiCl coexists with VCl₃, namely, VCl₃ ? LiCl or VCl₂ ? 2LiCl as a solid solution in the crystalline lattice, since VCl₃ prepared by thermal decomposition of VCl₄ and a commercial VCl₃ did not produce the crystalline polymer and soluble catalysts such as VCl₄ in heptane and VCl₃ ? LiCl in ether solution did not yield the stereospecific polymer. It was found that some additives, such as tetrahydrofuran or ethylene glycol diphenyl ether, to the catalyst increased the stereospecific polymerization activity of the catalysts. Influence of the polymerization conditions such as temperature, time, monomer and catalyst concentrations, and the kind of solvent on the formed polymer was also examined.     

Search for a simpler synthetic model system for intramolecular 1,3-dipolar cycloaddition to the 5,6-double bond of a pyrimidine nucleoside

In search for a simpler model system for the study of intramolecular thermal reactions between the base and 5'-functionalized sugar moiety in nucleosides, 1-(3-azidopropyl)uracil (2), 1-(4-azidobutyl) pyrimidines (12 and 13) and 1-(5-azidopentyl)-uracil (14) was synthesized through the corresponding ω-benzoyloxy-(6,7 and 8) and ω-hydroxyalkyl-pyrimidines (9,10 and 11). Heating 2 gave 1,N⁶-trimethylene-6-aminouracil (4), while heating 12 and 13 gave N¹-C₆ cleaved addition products. 15 and 16, respectively. 15 was regiospecifically transformed to 1,2,3-triazole derivatives, 17,18 and 19. Heating 1-(4-azidobutyl)-5-bromouracil (20) yielded 3,9-tetramethylene-8-azaxanthine (22). 9 with NBA gave 1,0⁶-tetramethylene-5-bromo-6-hydroxy-5,6-dihydrouracil (24) and the 5-brominated analog of 9 (25). The 4-functionalized butyl side chain proved to serve as a substitute for the 5'-functionalized sugar moiety in pyrimidine ribonucleosides.     

Supramolecular assembly based on π-π stacking and π-cation interactions between thiacalix[6]arene and DMF

The molecular assembly of thiacalix[6]arene was formed by π-π stacking and π-DMF interactions between thiacalix[6]arene and adjoining thiacalix[6]arene and between thiacalix[6]arene and DMF, respectively. The X-ray crystal analysis also revealed that hydroxyl groups of thiacalix[6]arene adopted novel two sets of hydrogen bond with two DMF and intramolecular hydrogen bond between phenolic units, which cause to make 1,2,3-alternate configuration structure of thiacalix[6]arene.     

Carbapenem and penem antibiotics. VI. Synthesis and antibacterial activity of 2-heteroaromatic-thiomethyl and 2-carbamoyloxymethyl 1-methylcarbapenems

The synthesis and antibacterial activity of the 1-methylcarbapenems, 2-heteroaromatic-thiomethyl and 2-carbamoyloxymethyl derivatives having a 6-[(R)-1-hydroxyethyl] side chain, are described. The introduction of a methyl substituent at the C-1 position was accomplished by a newly developed procedure using crotyl halides and zinc dust. The 2-hydroxymethyl carbapenems as key intermediates allowed an easy entry into the preparation of title carbapenems.     

Lewis acid-catalyzed asymmetric hydroxymethylation of silicon enolates in aqueous media

Asymmetric hydroxymethylation of silicon enolates with formaldehyde in aqueous media has been achieved using praseodymium triflate and a chiral crown ether. Formaldehyde aqueous solution can be directly used for the reactions, and a water/THF mixture was found to be the best solvent system. This is the first example of catalytic asymmetric hydroxymethylation of silicon enolates.     

The Raman and infrared spectrum of hexachloro-disilazane

The Raman and IR spectra of hexachlorodisilazane were measured, and the assignment carried out by comparison with those of the structurally related compounds, hexachlorodisiloxane, hexachlorodisilane and dimethylamine. The vibrational spectra of hexachlorodisilazane are very closely related to those of hexachlorodisiloxane, hexachlorodisilane and dimethylamine, and can be interpreted in terms of a non-rigid D_3d symmetry with an internal rotation.     

Technical study for SPECT of the head using slant hole collimator

The performance of a 160 keV slant hole collimator (160 keV SH) was compared with that of a 140 keV high resolution collimator (140 keV HR) for SPECT imaging of the head using 99mTc. The minimum radius of revolution was reduced from about 23 cm to 13 cm using 160 keV SH. Relative sensitivity of the 160 keV SH was 108% of that of the 140 keV HR. Compared with SPECT using 140 keV HR, 160 keV SH SPECT yielded approximately a 15% increase in resolution. The 160 keV SH SPECT images of phantom were superior in resolution and contrast to that of 140 keV HR SPECT. We concluded that high quality SPECT images of the head can be obtained from rotating gamma cameras equipped with slant hole collimators.     

Competition between transferrin and the serum ligands citrate and phosphate for the binding of aluminum

A key issue regarding the speciation of Al(3+) in serum is how well the ligands citric acid and phosphate can compete with the iron transport protein serum transferrin for the aluminum. Previous studies have attempted to measure binding constants for each ligand separately, but experimental problems make it very difficult to obtain stability constants with the accuracy required to make a meaningful comparison between these ligands. In this study, effective binding constants for Al-citrate and Al-phosphate at pH 7.4 have been determined using difference UV spectroscopy to monitor the direct competition between these ligands and transferrin. The analysis of this competition equilibrium also includes the binding of citrate and phosphate as anions to apotransferrin. The effective binding constants are 10(11.59) for the 1:1 Al-citrate complexes and 10(14.90) for the 1:2 Al-citrate complexes. The effective binding constant for the 1:2 Al-phosphate complex is 10(12.02). No 1:1 Al-phosphate complex was detected. Speciation calculations based on these effective binding constants indicate that, at serum concentrations of citrate and phosphate, citrate will be the primary low-molecular-mass ligand for aluminum. Formal stability constants for the Al-citrate system have also been determined by potentiometric methods. This equilibrium system is quite complex, and information from both electrospray mass spectrometry and difference UV experiments has been used to select the best model for fitting the potentiometric data. The mass spectra contain peaks that have been assigned to complexes having aluminum:citrate stoichiometries of 1:1, 1:2, 2:2, 2:3, and 3:3. The difference UV results were used to determine the stability constant for Al(H(-1)cta)-, which was then used in the least-squares fitting of the potentiometric data to determine stability constants for Al(Hcta)+, Al(cta), Al(cta)2(3-), Al(H(-1)cta)(cta)(4-), Al2(H(-1)cta)2(2-), and Al3(H(-1)cta)3(OH)(4-).