An Efficient Method for Agrobacterium-Mediated Genetic Transformation and Plant Regeneration in Cumin (Cuminum cyminum L.)

Cumin is an annual herbaceous medicinally important plant having diverse applications. An efficient and reproducible method of Agrobacterium-mediated genetic transformation was herein established for the first time. A direct regeneration method without callus induction was optimised using embryos as explant material in Gamborg’s B5 medium supplemented with 0.5-μM 6-benzyladenine and 2.0-μM α-naphthalene acetic acid. About 1,020 embryos (a mean of 255 embryos per batch) were used for the optimisation of transformation conditions. These conditions were an Agrobacterium cell suspension of 0.6 OD₆₀₀, a co-cultivation time of 72 h, 300-μM acetosyringone and wounding of explants using a razor blade. Pre-cultured elongated embryos were treated using optimised conditions. About 720 embryos (a mean of 180 embryos per batch) were used for transformation and 95 % embryos showed transient β-glucuronidase expression after co-cultivation. Putative transformed embryos were cultured on B5 medium for shoot proliferation and 21 regenerated plants were obtained after selection and allowed to root. T₀ plantlets showed β-glucuronidase expression and gene integration was confirmed via PCR amplification of 0.96 and 1.28 kb fragments of the hygromycin-phosphotransferase II and β-glucuronidase genes, respectively. In this study, a transformation efficiency of 1.5 % was demonstrated and a total of 11 transgenic plants were obtained at the hardening stage, however, only four plants acclimatised during hardening. Gene copy number was analysed by Southern blot analysis of hardened plants and single-copy gene integration was observed. This is the first successful attempt of Agrobacterium-mediated genetic transformation of cumin.     

Assessment of inhalation exposure potential of broken uranium ore piles in low-grade uranium mine

This paper presents the assessment of inhalation exposure potential of broken uranium ore piles in different stopes of Jaduguda uranium mines of India. ²²²Rn emanation coefficient of broken uranium ore was measured in laboratory by collecting air sample from airtight glass jar containing ore sample. An attempt was also made to correlate the emanation coefficient with ²²⁶Ra content of the ore. The ²²²Rn progeny doses estimated based on radon activity concentration of broken ore, occupancy period and equilibrium ratio in different stopes were well below the prescribed limit of International Commission on Radiological Protection. The maximum ²²²Rn progeny dose contribution from broken ore piles was worked out to be 0.22 mSv year^?1. This suggests that the broken ore piles are not the significant contributor of inhalation exposure under the existing ventilation condition of Jaduguda uranium mine.     

Measurement of 222Rn and 220Rn decay product deposition velocities using SSNTD based passive detectors

In the present study, the deposition velocities of ²²²Rn/²²⁰Rn decay products were measured experimentally using SSNTD based passive detectors, direct radon progeny sensor (DRPS) and direct thoron progeny sensor (DTPS) and the results were compared with obtained values by Monte-Carlo simulations. In both cases, deposition velocities were found to be log-normally distributed and also the experimentally measured geometric mean (GM) and geometric standard deviation (GSD) of (0.12, 1.85) m h^?1 for radon decay products and (0.07, 1.75) m h^?1 for thoron decay products were found to be in good agreement with the simulated values.     

Molecular structural investigations of quinoxaline derivatives through 3D-QSAR,molecular docking,ADME prediction and pharmacophore modeling studies for the search of novel antimalarial agent

In the present article, a dataset of 63 quinoxaline derivatives were taken for antimalarial activity and pharmacophore were developed. Atom based method was used to develop a three dimensional quantitative structure activity relationship (3D-QSAR) model. On comparison of all statistical parameters, model AHRRR23 was found to be the most effective and predictive QSAR model as it satisfied all statistical parameters of a good model. The model AHRRR23 showed an adequate R² value for the training set 0.9446, good predictive power with Q² of 0.6409, good F- value, low SD 0.1218 value and outstanding Pearson-R values and low RMSE 0.2779 values of the model. The docking studies also gives very good results with good RMSD values. 3D QSAR, docking and ADME studies exhibits that the developed model could be employed as a potential lead for further study as antimalarial drug.     

Thermal radiation impact on magneto-hydrodynamic heat transfer micropolar fluid flow over a vertical moving porous plate: A finite difference approach

For this research, an examination on the magnetohydrodynamic flow of a micropolar fluid across a moving vertical porous plate for the presence of thermal radiation is achieved. It is necessary to translate the partial differential equations regulating the flow, heat, & mass transfer into dimensionless form employing proper non-dimensional variables, which are then cracked numerically by utilizing the Finite difference approach. Graphs are used to represent numerical values of various flow profiles; however, tables are used to represent the simulated values of rate coefficients. The velocity rises when the value of Grashof number, dimensionless viscosity ratio is raised, and the opposite effect is seen when the value of magnetic parameter, micro-gyration factor is raised. The result in skin friction coefficient improves when the values of magnetic parameter, micro-gyration factor, Prandtl number, and radiation are raised higher.     

Assessing the feasibility study of highly efficient and selective co-sequestration process for cesium and strontium utilizing calix-crown and crown-ether based combined solvent systems

Journal of Radioanalytical and Nuclear Chemistry - Efficient and selective extraction of 137Cs and 90Sr from high level liquid waste (HLLW) is of utmost importance in the back end nuclear fuel...     

Ionic conductivity enhancement of PVA: carboxymethyl cellulose poly-blend electrolyte films through the doping of NaI salt

Cellulose - In this paper, we report the effect of doping sodium iodide (NaI) salt into a polymer blend matrix of sodium carboxymethyl cellulose (NaCMC) and poly(vinyl alcohol) (PVA). Solution...     

Supercritical CO2-assisted atomization for deposition of cellulose nanocrystals: an experimental and computational study

Nanoparticle spray deposition finds numerous applications in pharmaceutical, electronics, manufacturing, and energy industries and has shown great promises in engineering the functional properties of the coated parts. However, current spray deposition systems either lack the required precision in controlling the morphology of the deposited nanostructures or do not have the capacity for large-scale deposition applications. In this study, we introduce a novel spray system that uses supercritical CO₂ to assist the atomization process and create uniform micron-size water droplets that are used as cellulose nanocrystal (CNC) carriers. CNCs are selected in this study as they are abundant, possess superior mechanical properties, and contain hydroxyl groups that facilitate interaction with neighboring materials. We fundamentally investigate the effect of different process parameters, such as injection pressure, gas-to-liquid ratio, the axial distance between the nozzle and substrate, and CNC concentration on the final patterns left on the substrate upon evaporation of water droplets. To this end, we show how tuning process parameters control the size of carrier droplets, dynamics of evaporation, and self-assembly of CNCs, which in turn dictate the final architecture of the deposited nanostructures. We will particularly investigate the morphology of the nanostructures deposited after evaporation of micron-size droplets that has not been fully disclosed to date. Different characterization techniques such as laser diffraction, polarized microscopy, and high-resolution profilometry are employed to visualize and quantify the effect of each process parameter. Numerical simulations are employed to inform the design of experiments. Finally, it is shown that the fabricated nanostructures can be engineered based on the size of the carrier droplets controlled by adjusting spray parameters and the concentration of nanoparticles in the injected mixture. Process parameters can be selected such that nanoparticles form a ring, disk, or dome-shaped structure. Moderate operational conditions, simplicity, and time efficiency of the process, and use of abundant and biodegradable materials, i.e., water, CNCs, and CO₂ promote the scalability and sustainability of this method.

     

Synthesis and thermal evaluation of novel mono- and bis-adamantylated resorcinol-based phthalonitrile resins with enhanced solubility

Journal of Thermal Analysis and Calorimetry - Phthalonitrile (PN) resins are high-temperature-resistant thermosetting polymers which find applications in military as well as aerospace owing to...