Concise Synthesis of Well‐Defined Linear and Branched Oligothiophenes with Nickel‐Catalyzed Regiocontrolled Cross‐Coupling of 3‐Substituted Thiophenes by Catalytically Generated Magnesium Amide

The synthesis of linear and branched oligothiophenes of well‐defined structures is performed with regioselective deprotonation of 3‐substituted thiophenes and nickel‐catalyzed cross‐coupling of the thus formed metalated species with a bromothiophene. The reaction of 3‐hexylthiophene with EtMgCl and 2,2,6,6‐tetramethylpiperidine (TMP‐H, 10 mol %) induces the metalation selectively at the 5‐position by use of the catalytically generated hindered magnesium amide (TMPMgCl) and the subsequent reaction of a 2‐halo‐3‐hexylthiophene (bromide or chloride) in the presence of a nickel catalyst affords a head‐to‐tail (HT)‐type dimer. By repeating the same sequence, the linear oligothiophene up to a 4‐mer is synthesized in good yield. The reaction of 3‐hexylthiophene with 2,3‐dibromothiophene also takes place to afford a branched oligothiophene 3‐mer in quantitative yield. The obtained 3‐mer is also metalated at the sterically less‐hindered position in a regioselective manner furnishing a 7‐mer in >99 % yield after a further coupling reaction with 2,3‐dibromothiophene. These dendrimers react with several multifunctionalized organic electrophiles, leading to a variety of branched oligothiophenes.     

Direct Imaging of Light Emission Centers in Two‐Dimensional Crystals and Their Luminescence and Photocatalytic Properties

To fully understand the fundamental properties of light‐energy‐converting materials, it is important to determine the local atomic configuration of photofunctional centers. In this study, direct imaging of one‐ and two‐Tb‐atom emission centers in a two‐dimensional Tb‐doped Ca₂Ta₃O₁₀ nanocrystal was carried. The emission centers were located at the Ca sites in the perovskite structure, and no concentration‐based quenching was observed even when the emission centers were in close proximity to each other. The relative photoluminescence efficiency for green emission of the nanosheet suspension was 38.1 %. Furthermore, the Tb‐doped Ca₂Ta₃O₁₀ nanocrystal deposited co‐catalyst showed high photocatalytic activity for hydrogen production from water (quantum efficiency: 71 % at 270 nm). Tb³⁺ dopants in the two‐dimensional crystal might have the potential to stabilize the charge separation state.     

Extraction of amphetamines and methylenedioxyamphetamines from urine using a monolithic silica disk-packed spin column and high-performance liquid chromatography-diode array detection

To overcome the limitations of solid-phase extraction, we developed a device comprising a spin column packed with octadecyl silane-bonded monolithic silica for extracting amphetamines and methylenedioxyamphetamines from urine. Urine (0.5mL), buffer (0.4mL), and methoxyphenamine (internal standard) were directly put into the preactivated column. The column was centrifuged (3000rpm, 5min) for sample loading and washed. The adsorbed analytes were eluted and analyzed by high-performance liquid chromatography, without evaporation. The results were as follows: linear curves (drug concentrations of 0.2-20microg/mL); correlation coefficients >0.99; detection limit, 0.1microg/mL. The proposed method is not only useful for drugs from biological materials but also highly reproducible for the analysis of these drugs in urine.     

Properties of nitride‐based photovoltaic cells under concentrated light illumination

We investigated the properties of nitride‐based solar cells under concentrated light illumination from 1 to 200 suns. The conversion efficiency of our solar cells increased with increasing concentration up to 200 suns. The short‐circuit cur‐ rent density, open‐circuit voltage, fill factor, and conversion efficiency were 510 mA/cm², 1.9 V, 70%, and 3.4%, respectively, under an air mass filter of 1.5G at 200 suns and room temperature. (© 2012 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Catalytic asymmetric synthesis of spirooxindoles by a mannich-type reaction of isothiocyanato oxindoles

Easy access: a strontium/Schiff base complex as catalyst for the title reaction provided straightforward access to enantiomerically enriched spiro[imidazolidine-4,3'-oxindole] compounds, as well as a spiro[imidazoline-4,3'-oxindole] through a two-step conversion from the Mannich adduct.     

Total synthesis of (-)-13-oxyingenol and its natural derivative

Ring functionalization: the total synthesis of a natural derivative of (-)-13-oxyingenol, a potent anti-HIV diterpenoid, is reported. The key steps in this synthesis include a ring-closing olefin metathesis and a Mislow-Evans-type [2,3]-sigmatropic rearrangement. This synthesis provides access to (-)-13-oxyingenol and its natural derivative in 21 steps from a synthetic intermediate previously prepared by Kigoshi and co-workers.     

A stimulus-responsive shape-persistent micelle bearing a calix[4]arene building block: reversible pH-dependent transition between spherical and cylindrical forms

A series of cationic calix[4]arene-based lipids with alkyl chains of varying length were newly synthesized, and the ones with propyl and hexyl tails, denoted by CaL[4]C3 and C6, respectively, were found to form spherical micelles at low pH (protonated state of the amine headgroup). Upon deprotonation with increasing pH, CaL[4]C3 showed a sphere-to-cylinder transition, while CaL[4]C6 changed from sphere, to cylinder, to monolayer vesicle. Synchrotron small-angle X-ray scattering (SAXS) patterns from both spherical and cylindrical CaL[4]C3 micelles exhibited a sharp intensity minimum, indicating shape monodispersity. The monodispersity of the CaL[4]C3 spherical micelles was further confirmed by analytical ultracentrifugation (AUC). SAXS, AUC, and static light scattering agreeingly indicated an aggregation number of 6. In contrast, CaL[4]C6 exhibited polydispersity with an average aggregation number of 12. When the number of carbons of the alkyl chain was increased to 9 (CaL[4]C9), cylinder formed at low pH, while at high pH, no clear morphology could be observed. The present results indicate that a very precise combination of tail length, head volume, and rigidity of the building block is required to produce shape-persistent micelles and that the shape-persistence can be maintained upon a structural transition. An attempt to reconstruct a molecular model for the spherical CaL[4]C3 micelle was made with an ab initio shape determining program.     

A novel photocatalytic microreactor bundle that does not require an electric power source

A new type of photocatalytic reactor was developed. Capillaries coated on the inside with photocatalytic materials induced an effective photocatalytic reaction by pulling up a solution under the action of capillary forces; no electric pump was required for the replacement of the chemicals, due to the concentration gradient generated in the capillaries.     

Diphenylparabanic acid as a synthon for the synthesis of α-diketones and α-ketocarboxylic acids

Diphenylparabanic acid was found to react with >2 equiv of organolithiums at -78 °C to effectively give the corresponding symmetrical α-diketones. However, upon treatment with 1 equiv of organolithium, the parabanic acid gave mainly 5-substituted 5-hydroxyimidazolidine-2,4-diones. On the other hand, Grignard reagents were less reactive toward the parabanic acid at low temperature, and selectively gave the corresponding 5-hydroxyimidazolidine-2,4-diones even if more than 1 equiv of the reagents was used. A tandem process in which the parabanic acid was first reacted with a Grignard reagent and then reacted in one-pot with an organolithium effectively gave the unsymmetrical α-diketone. 5-Substituted 5-hydroxyimidazolidine-2,4-diones were useful as versatile precursors for preparing α-ketocarboxylic acids as well as unsymmetrical α-diketones.     

A granularity-based framework of deduction, induction, and abduction

In this paper, we propose a granularity-based framework of deduction, induction, and abduction using variable precision rough set models proposed by Ziarko and measure-based semantics for modal logic proposed by Murai et al. The proposed framework is based on α-level fuzzy measure models on the basis of background knowledge, as described in the paper. In the proposed framework, deduction, induction, and abduction are characterized as reasoning processes based on typical situations about the facts and rules used in these processes. Using variable precision rough set models, we consider β-lower approximation of truth sets of nonmodal sentences as typical situations of the given facts and rules, instead of the truth sets of the sentences as correct representations of the facts and rules. Moreover, we represent deduction, induction, and abduction as relationships between typical situations.