Preparation and Characterization of Cu2S Nanoparticles Via Ultrasonic Method

This study reports on the synthesis of Cu₂S nanoparticles via an ultrasonic method by employing Na₂SO₃ as a reducing agent. Morphology, structure, and composition of the obtained products were characterized by X-ray diffraction, energy dispersive X-ray analysis, scanning electron microscope and photoluminescence spectroscopy. The effects of time and power of irradiation were studied.     

Fabrication of ozone gas sensor based on FeOOH/single walled carbon nanotube-modified field effect transistor

A novel ozone (O₃) sensor is fabricated using commercial metal oxide field effect transistor (MOSFET), modified with single-walled carbon nanotubes (SWCNTs). In this study, integrated circuit (IC: BS250) was selected as the selective probe for O₃ detection. For this purpose, a plastic cover on the surface of the drain was drilled to bare the drain surface, followed by its modification with nitrogen and sulfur-functionalized SWCNTs by chemical vapor deposition (CVD) process. The CVD-synthesized SWCNTs were then electrodeposited with FeOOH nanostructures. According to the figures of merit, the fabricated sensor gave a linear output from 20 to 450 parts per billion (ppb). Detection limit was also 4.1?ppb. Relative standard deviation (RSD) for seven replicate analyses was 3.61%. Based on 90% of maximum response (t₉₀), the response time was ～1.5?min. Calibration sensitivity was measured to 1.3?mV/ppb. No interference was observed, when introducing at least 500 folds of interferences of gaseous species such as H₂O, HCl, H₂S, O₂, H₂, CO, CO₂, NO₂, SO₂, Cl₂, C₂H₂, CH₄ and volatile organic compounds (VOCs) to 250?ppb of O₃ solution. Reliability of the sensor was also evaluated via determination of O₃ in different air samples.     

Synthesis and antibacterial activity of ethyl 2-amino-6-methyl-5-oxo- 4-aryl-5,6-dihydro-4H-pyrano[3,2-c]quinoline-3-carboxylate

The three-component reaction of 4-hydroxy-1-methyl-2(1H)-quinolinone, aromatic aldehydes and ethyl cyanoacetate was carried out in the presence of a catalytic amount of 4-dimethyl aminopyridine(DMAP) in aqueous ethanol. The reactions result in the formation of pyranoquinoline derivatives in excellent yields. Antibacterial activity has been evaluated against Gram positive and Gram negative bacteria for some of the synthesized compounds. The results indicated that these compounds are moderately effective against bacterial growth and their effectiveness is highest against Pseudomonas aeruginosa.     

Three-Component Reaction of Triphenylphosphine,Acetylenic Esters,and Arylsulfonyl Hydrazides or Aryl Hydrazines: An Efficient One-Pot Synthesis of Stable β-Nitrogen-Substituted Phosphorus Ylides

The three-component reaction between dialkyl acetylenedicarboxylates and triphenylphosphine in the presence of arylsulfonyl hydrazides or aryl hydrazines produces highly functionalized, salt-free phosphorus ylides in excellent yields.     

Effect of three vitrification methods on development of two-cell mouse embryos

The purpose of this study was to investigate the effect of three vitrification procedures [conventional straw (CS), open pulled straw (OPS) and closed pulled straw (CPS)] on the development of two-cell mouse embryos. Two-cell mouse embryos were randomly divided into vitrified and non-vitrified control groups. Embryos in the vitrified group were cryopreserved within a combination of 5.5 M ethylene glycol and 1M sucrose as cryoprotectants, loaded within three different straws (CS, OPS and CPS) and warmed in stepwise sucrose solutions. The survived embryos from each procedure were cultured in human tubal fluid (HTF). The non-vitrified control embryos were also cultured in the same manner. The rates of the development in all the groups were daily determined and statistically compared. On day 4 of the cultivation period, several expanded blastocysts from each group were randomly selected and stained either with propidium iodide (PI) and bisbenzimide or with terminal transferase- mediate DNA end labeling (TUNEL) Technique. The mean number of the inner cell mass (ICM), trophoectoderm (TE), necrotic and apoptotic cells were counted and statistically compared. The survival rate of embryos in CPS was significantly higher than that in OPS and CS. The rate of hatched blastocysts did not differ in the three vitrification procedures, but in comparison with that of the control, CS and OPS showed a significant reduction. The mean number of ICM and TE decreased in CS and OPS, whereas in CPS it was almost identical to that of the control. The incidence of apoptosis and necrosis appeared to be almost similar in all the groups. In conclusion, CPS seems to be an effective, easy and rapid method for the cryopreservation of two-cell mouse embryos.     

Combined finite difference and spectral methods for the numerical solution of hyperbolic equation with an integral condition

In this work the combined finite difference and spectral methods have been proposed for the numerical solution of the one‐dimensional wave equation with an integral condition. The time variable is approximated using a finite difference scheme. But the spectral method is employed for discretizing the space variable. The main idea behind this approach is that we can get high‐order results. The new method is used for two test problems and the numerical results are obtained to support our theoretical expectations. © 2007 Wiley Periodicals, Inc. Numer Methods Partial Differential Eq, 2007     

Insights into Light‐driven DNA Repair by Photolyases: Challenges and Opportunities for Electronic Structure Theory

Ultraviolet radiation causes two of the most abundant mutagenic and cytotoxic DNA lesions: cyclobutane pyrimidine dimers and 6‐4 photoproducts. (6‐4) Photolyases are light‐activated enzymes that selectively bind to DNA and trigger repair of mutagenic 6‐4 photoproducts via photoinduced electron transfer from flavin adenine dinucleotide anion (FADH^?) to the lesion triggering repair. This review provides an overview of the sequential steps of the repair process, that is light absorption and resonance energy transfer, photoinduced electron transfer and electron‐induced splitting mechanisms, with an emphasis on the role of theory and computation. In addition, theoretical calculations and physical properties that can be used to classify specific mechanism are discussed in an effort to trace the fundamental aspects of each individual step and assist the interpretation of experimental data. The current challenges and suggested future directions are outlined for each step, concluding with a view on the future.