TE-TM Mode Converter Using Optically Active Polymer

A novel TE-TM mode converter using optically active polymer: poly-1-menthylmethacrylate (PMtMA) was studied theoretically and experimentally. In a three-layered slab waveguide consisting of the PMtMA core layer on a fused quartz substrate, a low-loss TE₀-TM₀ mode conversion with an efficiency of 60 to 70% was easily obtained for the first time at a wavelength of 441.6 nm. The method to achieve a phase-matched operation of this polymer TE-TM mode converter was also discussed.     

Tough epoxy resins cured with aminimides

Aminimide compounds ( 1–4 ) thermally generating isocyanates and tertiary amines were found to be excellent curing agents for epoxy resin. Tensile behavior, glass transition temperature, and degree of curing for the combination of EPIKOTE 828 prepolymer with a series of curing agents ( 1–4 ) are reported. The resins exhibit a large elongation at breakage and a high fracture energy per unit volume. The epoxy resins (EP-AI) cured with 3 or 4 containing no hydroxyl group showed larger ultimate elongations (up to 15%) and higher fracture energies (ca. 8 J/cm³) than the resins (EP–AI_OH) cured with 1 or 2 . The curing reaction depends on the structure of aminimide (presence of hydroxyl group and generation of mono- or bisisocyanates). The origin of toughness and dependence of physical properties on the curing condition and the structure of aminimides were discussed. It was concluded that relatively slow curing at elevated temperature controlled by thermal decomposition of aminimides was a reason for the toughness.     

Photochromic and photomechanical ionene elastomer containing poly(tetrahydrofuran) segments and viologen units

Elastomeric polymer consisting of poly(oxytetramethylene) segments and viologen units (PTV) was synthesized by the reaction of dicationic living poly(tetrahydrofuran) with 4,4′-bipyridine at ?70°C. The chloride or bromide ion was introduced as the counter anion into the viologen groups of PTV by the treatment of the reaction mixture with aqueous sodium chloride or bromide, respectively. The solid film of PTV having chloride inon showed photochromism, i.e., color change by light irradiation, via photoreduction of the violegen groups. In contrast. PTV of bromide counter anion required a small amount of poly(N-vinyl-2-pyrrolidone) to undergo the photochromic reaction. The irradiation of light also affected the stress relaxation of the polymers, namely PTV showed photomechanical behavior. This phenomenon is considered to be induced by the decrease of total number of ionic charges of PTV by photo-reduction of the viologen groups followed by the change of a state of ionic clustering in the polymer matrix.     

Chemical modification of butyl rubber. III. Butyl rubber with D-maltose derivative as pendant groups

A new type of amphiphilic elastomer was synthesized, which consisted of butyl rubber and a D-maltose derivative as a backbone and side groups, respectively. The synthesis was accomplished by the sequence of the three following reactions: (1) Hydroxyl groups of D-maltonolactone were protected by a trimethylsilyl group. (2) The resulting maltonolactone derivative was subjected to a reaction with chemically modified butyl rubber having pendant amino groups. (3) The protecting trimethylsilyl groups on the maltose residues were removed by treating with tetra-n-butylammonium fluoride. This new amphiphilic elastomer behaved as a thermoplastic elastomer and showed good mechanical properties. The saccharide seg-ments aggregated in the hydrophobic butyl rubber matrix to form a microphase-separated structure, as confirmed by differential scanning calorimetry, transmission electron mi-croscopy, small-angle x-ray scattering, and dynamic mechanical measurements. The ag-gregated saccharide domains are estimated to function both as crosslinking sites and rein-forcing fillers in the rubber matrix. © 1995 John Wiley & Sons, Inc.     

Synthesis of quinoxaline derivatives through condensation of 1,2-diaminobenzenes with β-keto sulfoxides

The reaction of o-phenylenediamine with α-methylsulfinylcyclohexanone and α-methylsulfinylcyclopentanone in the presence of acetic acid afforded 1,2,3,4-tetrahydrophenazine and 2,3-dihydro-1H-cyclopenta[b]-quinoxaline, respectively. 3,4-Diaminotoluene and 3,4-diaminochlorobenzene were reacted with α-methyl-sulfinylacetophenone to give a mixture of the corresponding 6- and 7-substituted 2-phenylquinoxaline. Condensation of 3,4-diaminomethoxybenzene with α-methylsulfinylacetophenone gave 7-methoxy-2-phenylacetophenone, whereas, the same reaction between 3,4-diaminonitrobenzene and α-methylsulfinylacetophenone yielded 6-nitro-2-phenylquinoxaline.     

Effects of dipole interaction and solvation on the CO stretching band of N,N-dimethylacetamide in nonpolar solutions: Infrared, isotropic and anisotropic Raman measurements

The concentration dependence of the CO stretching (ν_CO) band of N,N-dimethylacetamide (NdMA) in cyclohexane, n-hexane, and CCl₄ has been investigated by infrared (IR) and polarized Raman spectroscopy. For the neat liquid of NdMA, the noncoincidence of the aniso- and isotropic Raman wavenumbers is evident. In the 0.47 M cyclohexane solution of NdMA, the noncoincidence effect almost disappears and the ν_CO envelopes in both the Raman and IR spectra are asymmetric to the low-wavenumber side. When the concentration of NdMA decreases from 0.33 to 0.023 M, the peak of these bands slightly shifts to a higher wavenumber and the band shape becomes symmetric. The shape of the ν_CO envelope does not show any significant change below 0.023 M. These results suggest that the asymmetric shape of the ν_CO band observed for the 0.33 M cyclohexane solution is associated with the intermolecular interaction among NdMA molecules, which vanishes at around 0.02 M. Spectral changes for the CCl₄ solution of NdMA show a similar tendency. However, the shape and peak wavenumber of the ν_CO band observed in a highly diluted CCl₄ solution (≤0.023 M) indicate that the solvation effect of CCl₄ is more complicated than those of cyclohexane and n-hexane. The analyses of the ν_CO band, which is sensitive to the intermolecular interaction between solutes and between solute and solvent for NdMA dissolved in nonpolar solvents, would serve to clarify the electronic property of the molecule in a solution.     

Synthesis of functional graft copolymers by solution copolymerization and their evaluation as dispersants in nonaqueous phase dispersion polymerization

The poly(HEMA‐co‐MMA‐g‐PMMA) graft copolymer was prepared with a poly(methyl methacrylate) (PMMA) macromonomer, 2‐hydroxyethyl methacrylate (HEMA), and methyl methacrylate (MMA), and its application as a dispersant for the nonaqueous phase dispersion polymerization of polystyrene (PST) was investigated. Monodisperse PST particles were obtained with two‐dimensionally tailored graft copolymers, with the number of grafted chains controlled and the polar component (HEMA) in the backbone chains balanced. As for the reactor, a stirred vessel with moderate agitation yielded uniform polymer particles, whereas sealed glass ampules with an overturning motion yielded broader size distributions. Increasing the polarity of the solvent in the continuous phase yielded smaller polymer particles with a gradual deterioration of monodispersity. Uniform polymer particles with a coefficient of variation of less than 6% were obtained up to 30 wt % solid contents. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1788–1798, 2003     

Methyl,Trifluoromethyl, and Methoxycarbonyl—Introduction to the Fifth Position on the Pyridine Ring of Chloronicotinyl Insecticide Imidacloprid

Imidacloprid is the first chloronicotinyl insecticide and is currently the largest‐selling insecticide worldwide. As a project to find its variants of different insecticidal spectra, derivatives substituted with methyl, trifluoromethyl, and methoxycarbonyl at the fifth position on the pyridine ring of imidacloprid were prepared.     

Future Trends in Rubber Processing: The Chemistry of Rubber Processing

Abstract

Future trends in rubber processing are discussed with special emphasis on the chemical aspects that might be used to develop new and improved properties of rubber materials. They include optimization of such properties as resiliency and “softness,” of reinforcement and the control of crosslinking, and of the crosslink densities of rubbers during vulcanization.     

Occupation time theorems for a class of one-dimensional diffusion processes

Summary The long time asymptotic behavior of the occupation times on a half line is studied for a class of one-dimensional diffusion processes whose excursion intervals have very heavy tail probability