Effects of beta-sheet breaker peptide polymers on scrapie-infected mouse neuroblastoma cells and their affinities to prion protein fragment PrP(81-145)

The effects of Soto's 'beta-sheet breaker peptide' and its polymer on PrPSc formation in ScN2a cells were investigated. Surface plasmon resonance study indicated that direct binding between PrP(81-145) and the 'beta-sheet breaker peptide' is not specific and may not play a major role in the inhibition of PrPSc formation.     

Preparation of Secondary Carbinamines via Alkylation of N-Boryl Imines Generated from Partial Reduction of Nitriles with NABH4-Carboxylic Acid

Secondary carbinamines have been prepared from alkylation of N-boryl imines which were generated in situ from partial reduction of nitriles with sodium brohydride modified by carboxylic acid.     

Cubic phases of 4′-n-alkoxy-3′-nitrobiphenyl-4-carboxylic acids (ANBC-n)

The structure of the thermotropic cubic phases of 4′- ⁿ -alkoxy-3′-nitrobiphenyl-4-carboxylic acids (ANBC- ⁿ , where ⁿ indicates the number of carbon atoms in the alkoxy group) was studied by X-ray diffraction. For the homologues with ⁿ = 15, 16, 17, and 18, the cubic phase was of an ^Ia 3 ^d type, whereas the homologues with ⁿ = 19, 20, and 21 exhibited an ^Im 3 ^m cubic structure; for these seven homologues the same type of cubic structure was observed both on heating and cooling. Further lengthening of the alkoxy chain to ⁿ = 22 and 26, however, gave two types of cubic structure in the cubic phase region on heating, one with ^Im 3 ^m symmetry in the low temperature region and the other with ^Ia 3 ^d symmetry in the high temperature region. On cooling, the two homologues exhibited the ^Ia 3 ^d cubic structure only. This is the first example in the cubic phase region of a series of homologues containing two types of structure, dependent on temperature and ⁿ . Such a complicated phase diagram in the cubic region is clearly understood qualitatively in terms of Gibbs free energy-temperature diagrams. The dependence of structural parameters such as the cubic lattice constant on the alkoxy chain length ⁿ are also presented and discussed.     

Synthesis and characterization of 9,9‐bis(4‐hydroxyphenyl and 4‐aminophenyl)dibenzofluorenes: Novel fluorene‐based monomers

Two novel 9,9‐difunctionalized fluorene‐type monomers, 9,9‐bis(4‐hydroxyphenyl‐ and 4‐aminophenyl)‐2,3:6,7‐dibenzofluorenes, are synthesized by the reaction of dibenzenzofluorenone with phenol and aniline. These monomers are used for the preparation of polyester and polyimide as the typical polymers to evaluate the property change such as thermal stability caused by the benzene rings fused to the fluorene skeleton with keeping good solubility, in comparison with the polymers derived from simple fluorenone. In fact, these two new polymers have the fairly enhanced thermal stability and refractive index value along with satisfactory solubility in organic solvents, enough to emphasize the fusion effect. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 2602–2605     

Synthesis and Systematic Structural Analysis of Cationic Half-Sandwich Ruthenium Chalcogenocarbonyl Complexes

Although the chemistry of transition-metal complexes with carbonyl (CO) and thiocarbonyl (CS) ligands has been well developed, their heavier analogues, namely selenocarbonyl (CSe) and tellurocarbonyl (CTe) complexes remain scarce. The limited availability of such CSe and CTe complexes has so far hampered our understanding of the differences between such chalcogenocarbonyl (CE: E=O, S, Se, Te) ligands. Herein, we report the synthesis and properties of a series of cationic half-sandwich ruthenium CE complexes of the type [CpRu(CE)(H₂IMes)(CNCH₂Ts)][BAr^F₄] (Cp=η⁵-C₅H₅⁻; H₂IMes=1,3-dimesitylimidazolin-2-ylidene; Ar^F=3,5-(CF₃)₂C₆H₃). A combination of X-ray diffraction analyses, NMR spectroscopic analyses, and DFT calculations revealed an increasing π-accepting ability of the CE ligands in the order O<S<Se<Te. A variable-temperature NMR analysis of the thus obtained chiral-at-metal CE complexes indicated high stereochemical stability.     

Highly active polymeric organocatalyst: Chiral ionic polymers prepared from 10,11‐didehydrogenated cinchonidinium salt

Since few examples of 10,11‐didehydrogenated (3‐ethynyl) cinchona alkaloids have been utilized as organocatalysts in asymmetric reaction, we synthesized 10,11‐didehydrogenated cinchonidine. The 3‐vinyl group of cinchonidine was transformed into a 3‐ethynyl functionality. Based on the resulting 10,11‐didehydrogenated cinchonidine, the corresponding quaternary ammonium salt and its dimers were prepared. The ion‐exchange reaction between the quaternary ammonium salt and sodium sulfonate produced the quaternary ammonium sulfonate as a stable ionic compound. Chiral ionic polymers were then synthesized by the ion‐exchange polymerization of the 10,11‐didehydrogenated cinchonidinium salt dimer and a disulfonate. The chiral ionic polymers were found to be capable of efficiently catalyzing the asymmetric alkylation of N‐(diphenylmethylene)glycine tert‐butyl ester. The enantioselectivities obtained with the polymeric catalysts were higher than those obtained with the corresponding monomeric catalyst. Dimers of 10,11‐didehydrogenated cinchonidinium salts were prepared. Treatment of the dimer with disodium disulfonate gave the chiral ionic polymers, which showed high catalytic activity in asymmetric benzylation of N‐(diphenylmethylen)glycine tert‐butyl ester. The polymeric catalysts were reused several times without the loss of catalytic activity. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 621–627     

Abnormal Li diffusion in β-LiGa by the formation of defect complex

The diffusion coefficients of Li in the NaTl-type Li intermetallic compound of β-LiGa have been measured by using a short-lived radioactive diffusion tracer. As the tracer, the α-emitting radioisotope of ⁸Li delivered as the energetic and pulsed beam from Tokai Radioactive Ion Accelerator Complex (TRIAC) was implanted into the β-LiGa compounds with the composition in the range of about 43 to 54 at.% Li. By analyzing the time-dependent yields of the α-particles measured according to the repetition cycle of the beam, the tracer diffusion coefficients were extracted over the wide range of Li composition. Abnormal composition-dependence of Li diffusion coefficients in β-LiGa was observed; the stoichiometric β-LiGa showed the highest diffusivity of Li. By referring to the composition-dependent diffusivity of Li in the iso-structural β-LiAl and β-LiIn, we could identify the abnormal diffusion of Li in very Li-poor composition of β-LiGa. The anomaly has been discussed qualitatively in terms of the formation of defect complex and the interaction between the constitutional defects.     

Synthesis and Polymerization of N-(L-Menthylcarboxylatomethyl)maleimide

A new type of optically active N-(L-menthylcarboxylatomethyl)maleimide (MGMI) was synthesized from maleic anhydride, glycine, and L-menthol. Radical homopolymerization of MGMI was performed at 50°C for 24 h to give optically active polymer having [α]_D = -57°. Radical copolymerizations of MGMI (M ₁) were performed with styrene (ST, M ₂), methyl methacrylate (MMA, M ₂) in benzene at 50°C. From the results, the monomer reactivity ratios (r ₁, r ₂) and the Alfrey-Price Q, e values were determined as follows: r ₁ = 0.16, r ₂ = 0.006 for the MGMI-ST system; r ₁ = 0.15, r ₂ = 1.65 for the MGMI-MMA system, and Q ₁ = 0.72, e ₁ = 1.59 calculated from the MGMI-MMA system. Anionic homopolymerizations of MGMI were also carried out. Chiroptical properties of the polymers were investigated.     

Asymmetric Induction Copolymerization of Optically Active N-(1-Menthyl Carboxylatomethyl) Citraconimide with Methyl Methacrylate

Copolymerization of an optically active N-(1-menthyl carboxylatomethyl)citraconimide (MCMCI) was carried out with methyl methacrylate (MMA) with azobisisobutyronitrile as the initiator in benzene at 50°C. All the copolymers obtained were optically active. After the removal of the optically active menthyl group, the hydrolyzed poly(MCMCI-co-MMA)'s still showed optical activity. The asymmetric induction to the copolymer main chain and the mechanism are discussed based on the measurements of optical rotatory dispersion and circular dichroism of the original and hydrolyzed copolymers.     

Cubic phases of binary systems of 4′-n-tetradecyloxy-3′-nitrobiphenyl-4-carboxylic acid (ANBC-14)-n-alkane

The phase behaviour of the binary systems 4′- ⁿ -tetradecyloxy-3′-nitrobiphenyl-4-carboxylic acid (ANBC-14)- ⁿ -alkane ( ⁿ -tetradecane or ⁿ -hexadecane) was investigated by differential scanning calorimetry, polarizing optical microscopy, and X-ray diffraction. The phase behaviour was a function of temperature ( ^T ) and the effective carbon number of the system ( ^n*), where ^n* involves carbon atoms both from the alkoxy group of ANBC-14 and from the ⁿ -alkane added. ANBC-14 shows no cubic phase, but the addition of ⁿ -alkane induced cubic phases when ^n*≧c. 15. An interesting point is that the type of cubic phase is ^Ia 3 ^d for 15^≦n*≦17, while an ^Im 3 ^m type is formed for 18^≦n*≦20. Furthermore, for ^n* = 22, two types of cubic phase, one with ^Im 3 ^m symmetry in the low temperature region and the other with ^Ia 3 ^d in the high temperature region, were observed both on heating and cooling. The phase diagram with respect to ^T and ^n* is very similar to that of pure one-component ANBC- ⁿ , which is a function of ^T and the number of carbon atoms in the alkoxy group ⁿ .