Synthesis and characterization of polystyrene‐b‐poly (1,2‐isoprene‐ran‐3,4‐isoprene) block copolymers with azobenzene side groups

Polystyrene‐b‐poly(1,2‐isoprene‐ran‐3,4‐isoprene) block copolymers with azobenzene side groups were synthesized by the esterification of azobenzene acid chloride with polystyrene‐b‐hydroxylated poly(1,2‐isoprene‐ran‐3,4‐isopenre) block copolymers for creating new photochromic materials. The resulting block copolymers with azobenzene side groups were characterized for structural, thermal, and morphological properties. IR and NMR spectroscopies confirmed that the polymers obtained had the expected structures. Differential scanning calorimetric measurements by heating runs clearly showed the glass transitions of polystyrene and polyisoprene main chains and two distinct first‐order transitions at temperatures of azobenzene side groups around 48 and 83 °C. The microstructure of these block copolymer films was investigated using both transmission electron microscopy (TEM) and near‐field optical microscopy (NOM). TEM images revealed typical microphase‐separated morphologies such as sphere, cylinder, and lamellar structures. The domain spacing of microphase‐separated cylindrical morphology in the NOM image agreed with that of the TEM results. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2406–2414, 2002     

POE incorporation into ionic clusters of ionomer and ion-conduction behaviors

Poly(oxyethylene) (POE) was incorporated into the ionic clusters of ionomers, ethylene and methacrylic acid (7.2% neutralized with KOH) copolymer membrane. The changes of properties were studied from SAXS, DSC, IR and ionic conductivity. The IR study suggested that the coordinated structures in ionic clusters of the membrane were destroyed by POE incorporation, and also SAXS suggested that ionic clusters were swollen by POE incorporation. The ionic conductivity, a carrier being K⁺ in this system, increases from 10^?16 S/cm to 10^?9 S/cm at 30°C by the incorporation of POE (20.5 wt%). On the other hand, a large amount of POE (63 wt%) could be incorporated into ionomer membrane by the esterification of methacrylic acid groups (93%) with POE. When LiClO₄ was added, ionic conduction occurred in the phase-separated POE domain, which had a low glass transition temperature (?55.2°C), showing an ionic conductivity 2.6 × 10^?6 S/cm at 25°C.     

On-probe pyrolysis desorption electrospray ionization (DESI) mass spectrometry for the analysis of non-volatile pyrolysis products

An on-probe pyrolyzer has been constructed and interfaced with desorption electrospray ionization (DESI) mass spectrometry (MS) for the rapid analysis of non-volatile pyrolysis products. The detection and analysis of non-volatile pyrolysis products of peptides, proteins and the synthetic polymer poly(ethylene glycol) were demonstrated with this instrument. The on-probe pyrolyzer can be operated off-line or on-line with the DESI source and was interfaced with a tandem MS (MS/MS) instrument, which allowed for structure characterization of the non-volatile pyrolytic products. Advantages of this system are its simplicity and speed of analysis since the pyrolysis is performed in situ on the DESI source probe and hence, it avoids extraction steps and/or the use of matrices (e.g., as in MALDI–MS analyses).     

Dynamic identification of phosphopeptides using immobilized metal ion affinity chromatography enrichment, subsequent partial beta-elimination/chemical tagging and matrix-assisted laser desorption/ionization mass spectrometric analysis

The enrichment of phosphopeptides using immobilized metal ion affinity chromatography (IMAC) and subsequent mass spectrometric analysis is a powerful protocol for detecting phosphopeptides and analyzing their phosphorylation state. However, nonspecific binding peptides, such as acidic, nonphosphorylated peptides, often coelute and make analyses of mass spectra difficult. This study used a partial chemical tagging reaction of a phosphopeptide mixture, enriched by IMAC and contaminated with nonspecific binding peptides, following a modified beta-elimination/Michael addition method, and dynamic mass analysis of the resulting peptide pool. Mercaptoethanol was used as a chemical tag and nitrilotriacetic acid (NTA) immobilized on Sepharose beads was used for IMAC enrichment. The time-dependent dynamic mass analysis of the partially tagged reaction mixture detected intact phosphopeptides and their mercaptoethanol-tagged derivatives simultaneously by their mass difference (-20 Da for each phosphorylation site). The number of new peaks appearing with the mass shift gave the number of multiply phosphorylated sites in a phosphopeptide. Therefore, this partial chemical tagging/dynamic mass analysis method can be a powerful tool for rapid and efficient phosphopeptide identification and analysis of the phosphorylation state concurrently using only MS analysis data.     

Alternating copolymer of thiophene andN‐(phenylethynyl)pyrrole. New π‐conjugated alternating five‐membered ring copolymer and its packing structure

An alternating copolymer, Copoly‐1 , of thiophene and N‐(phenylethynyl)pyrrole was prepared by palladium‐catalyzed polycondensation. Powder X‐ray diffraction (XRD) analysis indicated that Copoly‐1 formed a stacked packing structure with doubly‐running polymer main chains. Optical data support the molecular and packing structures of Copoly‐1 . © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 2219–2224, 2005     

Factors affecting the catalytic epoxidation of olefins by iron porphyrin complexes and H2O2 in protic solvents

The catalytic epoxidation of cyclohexene by iron(III) porphyrin complexes and H2O2 has been investigated in alcohol solvents to understand factors affecting the catalyst activity in protic solvents. The yields of cyclohexene oxide and the Fe(III/II) reduction potentials of iron porphyrin complexes were significantly affected by the protic solvents, and there was a close correlation between the product yields and the reduction potentials of the iron porphyrin catalysts. The role of alcohol solvents was proposed to control the electronic nature of iron porphyrin complexes that determines the catalyst activity in the epoxidation of olefins by H2O2. We have also demonstrated that an electron-deficient iron porphyrin complex can catalyze the epoxidation of olefins by H2O2 under conditions of limiting substrate with high conversion efficiency in a solvent mixture of CH3OH and CH2Cl2.     

In situ photopolymerization of a polymerizable poly(ethylene glycol)-covered phospholipid monolayer on a methacryloyl-terminated substrate

We have prepared a chemically anchored monolayer of PEG (poly(ethylene glycol)) and phospholipid mixture (PEG/phospholipid) on a methacryloyl-terminated substrate by in situ photopolymerization. Both monoacryloyl phospholipid (acryloyl-PC, 1-palmitoyl-2-[12-(acryloyloxy)dodecanoyl]-sn-glycero-3-phosphocholine) and monoacryloyl PEG (acryloyl-PEG, 12-(acryloyloxy)dodecanoyl-PEG) were synthesized by modifyingphospholipid and PEGwith 12-(acryloyloxy)-1-dodecanoic acid and 12-(acryloyloxy)-1-dodecanol, respectively. The surface pressure-area (pi-A) isotherm showed that acryloyl-PEG molecules were stable in the phospholipid monolayer and that they could be evenly inserted into a phospholipid monolayer at the air/water interface. By adding 10 mol % acryloyl-PEG into phosholipid vesicles, we could produce a PEG/phosholipid monolayer on methacryloyl-terminated substrates using vesicle fusion for 3 h. Then, this polymerizable PEG/phospholipid monolayer was in situ photopolymerized onto a methacryloyl-terminated substrate with eosin Y/triethanolamine as co-initiators. Optimal vesicle fusion and irradiation condition were determined with respect to the vesicle fusion time and duration of irradiation. As confirmed by atomic force microscopy and X-ray reflectivity studies, the polymerized PEG/phosholipid surface formed a PEG-covered phospholipid monolayer with thicknesses of 3 and 6 nm for the base phospholipid monolayer and the covering PEG layer, respectively. The chemical anchoring efficiency ofpolymerized PEG and phospholipid molecules, which was calculated by the relative carbon ratio of each surface before and after methanol washing using X-ray photoelectron spectroscopy, was 98%. This polymerized PEG/phosholipid monolayer showed good stability in organic solution due to firm chemical anchoring to a solid surface.     

bPAK-interacting exchange factor may regulate actin cytoskeleton through interaction with actin

p21-activated kinase (PAK)-interacting exchange factor (PIX) is known to be involved in regulation of Cdc42/Rac GTPases and PAK activity. PIX binds to the proline-rich region of PAK, and regulates biological events through activation of Cdc42/Rac GTPase. To further investigate the role of PIX we produced monoclonal antibodies (Mab) against bPIX. Three clones; N-C6 against N-terminal half and C-A3 and C-B7 against C- terminal half of bPIX were generated and characterized. N-C6 Mab detected bPIX as a major band in most cell lines. C-A3 Mab recognizes GIT-binding domain (GBD), but it does not interfere with GIT binding to bPIX. Using C-A3 Mab possible bPIX interaction with actin in PC12 cells was examined. bPIX Mab (C-A3) specifically precipitated actin of the PC12 cell lysates whereas actin Mab failed to immunoprecipitate bPIX. Co-sedimentation of PC12 cell lysates with the polymerized F-actin resulted in the recovery of most of bPIX in the cell lysates. These results suggest that bPIX may not interact with soluble actin but with polymerized F-actin and revealed that bPIX constitutes a functional complex with actin. These data indicate real usefulness of the bPIX Mab in the study of bPIX role(s) in regulation of actin cyoskeleton.