Studies on the self-assembly behavior of the amphiphilic block copolymer of PSt-b-PAA in apolar solvents with polar fluorescent probe

The block copolymer of polystyrene-b-poly(butyl acrylate) (PSt-b-PBA) with a well-defined structure was synthesized by atom transfer radical polymerization (ATRP); its structure was characterized, and the living polymerization was also validated by gel permeation chromatography, Fourier transform infrared, and ¹H NMR measurements. Then, the amphiphilic block copolymer of polystyrene-b-poly(acrylic acid) (PSt-b-PAA) has been prepared by hydrolysis of PSt-b-PBA, and copolymers of PSt-b-PAA with longer PSt blocks and shorter PAA blocks were obtained by controlling the conditions of ATRP polymerization. The reversed micelle solution of PSt-b-PAA in toluene was prepared by using the single-solvent dissolving method, and the reverse micellization behavior of PSt-b-PAA in toluene was mainly investigated in this paper. The fluorescent probe technique was used by using polar fluorescence compound N-(1-Naphthyl)ethylenediamine dihydrochloride (NEAH) as a polar fluorescent probe to study the reverse micellization behavior of PSt-b-PAA. It was found that the reverse micellization behaviors of PSt-b-PAA in toluene can be clearly revealed by using NEAH as a polar fluorescence probe, and the critical micelle concentrations (cmcs) can be well displayed. The experimental results showed that the self-assembling behavior of PSt-b-PAA in toluene depends apparently on the microstructure of the macromolecules and is also influenced by the temperature. For the copolymers of PSt-b-PAA with the same length of hydrophobic PSt blocks, the copolymer with a longer hydrophilic block PAA has lower cmc, and at higher temperature, the copolymer has lower cmc.     

PVC膜电极上的示波电位滴定法及其在药物分析中的应用

本文研究了用于示波电位滴定的PVC膜电极,成功地用于中和、络合及沉淀滴定,并探讨了它们在药物分析中的应用。所研究电极见表1。实验部分一仪器与试剂 SR-071型双踪示波器,213型铂片电极     

三氯乙酸根离子选择电极的研制

以长链季铵盐为活性物研制成功PVC膜三氯乙酸根离子选择电极。该电极在1×10~(-1)～2×10~(-6)M Cl_3CCOO-离子浓度范围内显示良好的Nernst响应,检测下限为1.2×10~(-6)M。用固定干扰法测定了该电极对Ac~-、Cl~-,SO_4~-、H_2PO_4~-、HCO_3~-、CO_3~-,Cl_2CHCOO~-、NO_3~-等离子的选择性系数,仅NO_3~-有明显干扰。电极适用于中性、偏碱性溶液,在1×10~(-3)M Cl_3CCOONa溶液中,pH 7.0～12.5电势读数稳定。电极连续工作五小时电势变化为±1mV,可以作为一种分析三氯乙酸盐的简便快速方法。这对控制环境污染,判断职业中毒都十分重要。     

助熔剂N_aCl－CdCl_2对CdS∶Cu，In结晶状态作用规律研究

发现在确定的热处理温度和时间下，随炉料中助熔剂ＮａＣｌ－ＣｄＣｌ２，总含量的增加，ＣｄＳ：Ｃｕ，Ｉｎ多晶的粒度分布变窄，数均粒径具有最大值，晶粒外型趋于规整且表面平滑．进而证明，多晶的结晶状态对其光电性能具有显著的影响．     

硅酸盐中桥联键的机制及其性质的CNDO/2法研究

法计算模型,分析了桥联键的成键机制,解释了硅酸盐的通常性质。以体系总能量随桥角变化关系,解释了硅酸盐矿物及沸石分子筛中桥角Si-O-T出现的范围和几率。 由计算结果还发现,桥氧上具有较高的非键p-电子电荷Q_o~n,并随桥氧的第三配原子性质和距离R(M-O~(br))而变化,使桥氧具有授受电子的双重性质。在此基础上,探讨了沸石分子筛的碳离子催化活性机理,提出了锁与匙匹配原子对的催化活性中心的新观点。     

有机/无机异质结薄膜发光二极管

聚合物发光二极管（LED）自从Burrou吵es等于1990年首次报导PPV的电致发光［‘］以来，由于聚合物半导体具有热和化学性能的稳定，克眼了有机小分子材料容易晶化的优点，在平板显示领域必将占有一席之地，从而吸引了许多科学家投身到这一领域来．众所周知，要想实现LED的实用化     

联二脲氧化生成偶氮二甲酰胺反应的钒催化机理

在钒催伦剂存在下，用氯酸钠氧化联二脲制成偶氮二甲酰胺，从钒催化剂的单晶培养和结构解析入手，通过反应动力学研究，用ＥＳＲ检测反应过程中四价钒的生成，用分光光度法（分别以钛钛试剂和硫氰酸铵为显色剂）确定了反应过程中三价钒的生成和变化情况，从而提出了可能的催化机理，还利用量化计算从热力学角度证实了所提出的包括四价钒铬离子歧化过程在内的钒催化机理的合理性。     

锰、铑原卟啉IX-二甲酯配合物共振拉曼光谱研究

合成了MnPPCl,RhPPCl,RhPPN3,RhPP(CO)Cl四种配合物 (PP =ProtophyrinIXDimethy1Ester) ,用元素分析、红外吸收光谱及紫外吸收光谱确定了配合物的组成 ,测定了它们的共振拉曼光谱 ,对特征谱带进行了归属。分析了拉曼谱带和电子吸收谱带变化的原因 ,提出了谱带频率的变化受金属离子外层d电子和轴配体的影响。     

共轭亚麻酸的制备、表征和生物活性研究进展

近年来的研究发现共轭亚麻酸(CLN)具有多种非常有益的生理功能,已成为化学家、药理学家、营养学家争相研究的热点。本文就CLN的制备、表征、分离分析以及生物活性等方面,对国内外的研究进行了综述。CLN的制备包括化学法、生物法和天然产物提取法三大类。CLN的表征方法主要有紫外光谱、红外光谱、核磁共振等方法,以及采用气相色谱法(GC)、高效液相色谱法(HPLC)和毛细管电泳法(CE)等方法对合成的CLN混合物进行分离分析。CLN的生物活性主要有抗癌、降血脂、减肥、抗致癌等。     

A microfluidic device using a green organic light emitting diode as an integrated excitation source

A simply fabricated microfluidic device using a green organic light emitting diode (OLED) and thin film interference filter as integrated excitation source is presented and applied to fluorescence detection of proteins. A layer-by-layer compact system consisting of glass/PDMS microchip, pinhole, excitation filter and OLED is designed and equipped with a coaxial optical fiber and for fluorescence detection a 300 microm thick excitation filter is employed for eliminating nearly 80% of the unwanted light emitted by OLEDs which has overlaped with the fluorescence spectrum of the dyes. The distance between OLED illuminant and microchannels is limited to approximately 1 mm for sensitive detection. The achieved fluorescence signal of 300 microM Rhodamine 6G is about 13 times as high as that without the excitation filter and 3.5 times the result of a perpendicular detection structure. This system has been used for fluorescence detection of Rhodamine 6G, Alexa 532 and BSA conjugates in 4% linear polyacrymide (LPA) buffer (in 1 x TBE, pH 8.3) and 1.4 fmol and 35 fmol mass detection limits at 0.7 nl injection volume for Alexa and Rhodamine dye have been obtained, respectively.