A Note on Geometric Structures of Linear Ordered Orthogonal Arrays and (T,M,S)-Nets of Low Strength

The equivalent geometrical configurations of linear ordered orthogonal arrays are determined when their strengths are 3 and 4. Existence of such geometrical configurations is investigated. They are also useful in the study of (T, M, S)-nets.     

防紫外线伞ATR-OMNI采样器的FTIR分析

本实验使用OMNI采样器，直接对伞面内外进行单反射ATR的分析，快速、简便、不破坏样品，得到分辨率很好的红外图谱，再配合红外谱库的谱图检索，可以分别得到匹配率95％以上的尼龙－6和聚酯型聚氨酯的分析结果。     

Analysis of far-infrared laser magnetic resonance spectra of CH2Br at 447.3 and 671.1μm

A simple model has been developed to describe the Zeeman patterns of far-infrared laser magnetic resonance spectra of the monobromomethyl radical CH₂Br observed at 447.3 and 671.1μm. A satisfactory agreement between the experimental spectra of the radical and their simulation with this simple model has been achieved. This approach can be used to gain further information about the structure and the spectrum of this interesting radical.     

一类Narcissistic反应过渡态的优化

我们对一类narcissistic 反应XCH_2-CH_2Y→[过渡态TS]→YCH_2—CH_2X (1)进行了研究,结果表明其过渡态能在对称性限制下由能量极小化方法较容易地给出. 采用IMSPAK分子轨道从头算程序,在IBM VM/370计算机系统上用STO—3G极小基组以平衡几何构型的能量梯度优化方法,在对称性限制下对反应(1)的几种反应体系的过渡态构型进行了优化,其结果列于表1.     

Frequency-stabilized semimonolithic frequency doubler with high output power

We present a semimonolithic frequency-doubler from 1080 to 540 nm with 80% doubling efficiency and up to 849-mW output power of green light.     

稀有衰变B0(Bs)→γv(-v)分支比的计算

在标准模型中,三体稀有衰变B0(Bs)→γv(-v)只有通过箱图和企鹅图才可以发生.这个过程对于确定B介子的衰变常数及其波函数有着较重要的物理意义,由于这些衰变道的分支比较小,因此也是探测新物理理论的比较好的场所.利用B介子强衰变确定的波函数,得到B0(Bs)→γv(-v)的分支比的数量级是10-9(10-8),这些结果可以在未来的实验上得到检验.     

X分形晶格上Gauss模型的临界性质

采用实空间重整化群变换的方法,研究了2维和d(d>2)维X分形晶格上Gauss模型的临界性质.结果表明:这种晶格与其他分形晶格一样,在临界点处,其最近邻相互作用参量也可以表示为K=bqiqi(qi是格点i的配位数,bqi是格点i上自旋取值的Gauss分布常数)的形式;其关联长度临界指数v与空间维数d(或分形维数df)有关.这与Ising模型的结果存在很大的差异. 关键词： X分形晶格 重整化群 Gauss模型 临界性质     

Tokamak中自举电流的剖面准直性

利用Harris模型,通过求解等离子体平衡方程,计算俘获粒子份额,分别对常规剪切和中心负剪切下tokamak中的自举电流的大小和剖面准直性进行了计算和分析.自举电流分布与等离子体平衡电流分布之间的剖面准直性可以通过调整等离子体的密度、温度和电流分布参数,以及描述等离子体形状的拉长度k和三角变形因子d来获得.中心负剪切位形有利于自举电流产生,并有好的剖面准直性.通过计算比较,分别在常规剪切位形下和中心负剪切位形下获得了一组优化的等离子体参数,在这组参数下,自举电流有较大的份额和好的剖面准直性 关键词： tokamak 自举电流 剖面准直性     

Polar oscillation and dispersion properties of quasi-confined optical phonon modes in a wurtzite GaN/AlxGa1−xN nanowire

Under the dielectric continuum model and Loudon’s uniaxial crystal model, the properties of the quasi-confined (QC) optical phonon dispersions and the electron-QC phonons coupling functions in a cylindrical wurtzite nanowire are deduced via the method of electrostatic potential expanding. Numerical computations on a GaN/Al_0.15Ga_0.85N wurtzite nanowire are performed. Results reveal that, for a definite axial wave number k_z and a certain azimuthal quantum number m, there are infinite branches of QC modes. The frequencies of these QC modes fall into two regions, i.e. a high frequency region and a low frequency region. The dispersion of the QC modes are quite apparant only when k_z and m are small. The lower-order QC modes in the higher frequency region play more important role in the electron-QC phonon interactions. Moreover, for the higher-order QC modes in the high frequency region, the electrostatic potentials “escaping” out of the well-layer material nearly could be ignored.     

Plasticity field adjacent to faces of asperities on a rotating roll after initial indentation into a half-space

The plastic deformation field near the horizontal surface of a half space of perfectly plastic material associated with an indenting rotating rigid tooth is studied using slip line theory. The tooth is one of many on a roll surface and indents first into the half-space material and then rotates about the roll center. A slip line field is proposed for the deforming plastic region and a solution scheme is outlined. The emphasis is on determining the shape of the deforming region, especially that of the free surface. The study has a potential application in roughness transfer in metal forming processing.