Controlled production of oil-in-water emulsions containing unrefined pumpkin seed oil using stirred cell membrane emulsification

Membrane emulsification of unrefined pumpkin seed oil was performed using microengineered flat disc membranes on top of which a paddle blade stirrer was operated to induce surface shear. The membranes used were fabricated by galvanic deposition of nickel onto a photolithographic template and contained hexagonal arrays of uniform cylindrical pores with a diameter of 19 or 40 μm and a pore spacing of 140 μm. The uniformly sized pumpkin seed oil drops with span values less than 0.4 were obtained at oil fluxes up to 640 L m⁻² h⁻¹ using 2 wt.% Tween 20 (polyoxyethylene sorbitan monolaurate) or 2–10 wt.% Pluronic F-68 (polyoxyethylene–polyoxypropylen copolymer) as an aqueous surfactant solution. Pumpkin seed oil is rich in surface active ingredients that can be adsorbed on the membrane surface, such as free fatty acids, phospholipids, and chlorophyll. The adsorption of these components on the membrane surface gradually led to membrane wetting by the oil phase and the formation of uniform drops was achieved only for dispersed phase contents less than 10 vol.%. At high oil fluxes, Pluronic F-68 molecules present at a concentration of 2 wt.% could not adsorb fast enough, on the newly formed oil drops, to stabilise the expanding interface.     

Fe2 and Fe4 clusters encapsulated in vacant polyoxotungstates: hydrothermal synthesis, magnetic and electrochemical properties, and DFT calculations

While the reaction of [PW(11)O(39)](7-) with first row transition-metal ions M(n+) under usual bench conditions only leads to monosubstituted {PW(11)O(39)M(H(2)O)} anions, we have shown that the use of this precursor under hydrothermal conditions allows the isolation of a family of novel polynuclear discrete magnetic polyoxometalates (POMs). The hybrid asymmetric [Fe(II)(bpy)(3)][PW(11)O(39)Fe(2) (III)(OH)(bpy)(2)]12 H(2)O (bpy=bipyridine) complex (1) contains the dinuclear {Fe(micro-O(W))(micro-OH)Fe} core in which one iron atom is coordinated to a monovacant POM, while the other is coordinated to two bipyridine ligands. Magnetic measurements indicate that the Fe(III) centers in complex 1 are weakly antiferromagnetically coupled (J=-11.2 cm(-1), H=-JS(1)S(2)) compared to other {Fe(micro-O)(micro-OH)Fe} systems. This is due to the long distances between the iron center embedded in the POM and the oxygen atom of the POM bridging the two magnetic centers, but also, as shown by DFT calculations, to the important mixing of bridging oxygen orbitals with orbitals of the POM tungsten atoms. The complexes [Hdmbpy](2)[Fe(II)(dmbpy)(3)](2)[(PW(11)O(39))(2)Fe(4) (III)O(2)(dmbpy)(4)]14 H(2)O (2) (dmbpy=5,5'-dimethyl-2,2'-bipyridine) and H(2)[Fe(II)(dmbpy)(3)](2)[(PW(11)O(39))(2)Fe(4) (III)O(2)(dmbpy)(4)]10 H(2)O (3) represent the first butterfly-like POM complexes. In these species, a tetranuclear Fe(III) complex is sandwiched between two lacunary polyoxotungstates that are pentacoordinated to two Fe(III) cations, the remaining paramagnetic centers each being coordinated to two dmbpy ligands. The best fit of the chi(M)T=f(T) curve leads to J(wb)=-59.6 cm(-1) and J(bb)=-10.2 cm(-1) (H=-J(wb)(S(1)S(2)+S(1)S(2*)+S(1*)S(2)+S(1*)S(2*))-J(bb)(S(2)S(2*))). While the J(bb) value is within the range of related exchange parameters previously reported for non-POM butterfly systems, the J(wb) constant is significantly lower. As for complex 1, this can be justified considering Fe(w)--O distances. Finally, in the absence of a coordinating ligand, the dimeric complex [N(CH(3))(4)](10)[(PW(11)O(39)Fe(III))(2)O]12 H(2)O (4) has been isolated. In this complex, the two single oxo-bridged Fe(III) centers are very strongly antiferromagnetically coupled (J=-211.7 cm(-1), H=-JS(1)S(2)). The electrochemical behavior of compound 1 both in dimethyl sulfoxide (DMSO) and in the solid state is also presented, while the electrochemical properties of complex 2, which is insoluble in common solvents, have been studied in the solid state.     

Structural and thermoanalytical features of novel morpholinium-based high-voltage ionic liquid

Ionic liquid N-methyl-N-(2-(2-methoxyethoxy)-ethyl)-morpholinium bis-(trifluoromethylsulfonyl) imide was synthesized for the first time by nucleophilic substitution of bromide ion by N-methyl-morpholine. The composition was confirmed by ¹H and ¹³C nuclear magnetic resonance (NMR) spectroscopy. Using thermal analysis and mass spectroscopy, thermal stability of this ionic liquid as well as possible directions of its destruction was analyzed. Melting point for this liquid using differential scanning calorimetry (DSC) was estimated in the range (?80 to ?74) °C. The dependence of electroconductivity of acetonitrile solution on concentration and temperature was studied for dissociation constant and conductivity activation energy calculations, respectively. The electrochemical stability window for this ionic liquid was defined by cyclic voltammetry and estimated as 4.84 V.     

Improved FIB milling process for TEM preparation of NiAlPt bulk alloy samples containing residual stress

NiAlPt alloys which undergo complex martensitic and twinning transformations during thermal cycling were prepared for Transmission Electron Microscopy (TEM) analysis using the Focused Ion Beam (FIB) milling process. Coupons of alloys that underwent cyclic heating, with no prior isothermal heat treatment contained a build-up of residual stress that caused sections of the foil to crack or buckle during the thinning process, rendering them useless. The solution was to mill strain isolation trenches perpendicular to the area of interest. These trenches acted as reservoirs for the released residual stress. This step was conducted in conjunction with reducing the beam current much earlier in the thinning process, thus ensuring minimum damage to the section being thinned. These two modifications of the standard FIB milling process, with emphasis on the strain isolation trenches, allowed for successful preparation of TEM samples from a bulk alloy containing residual stress.     

Synthesis and Characterization of Ru-Loaded Anodized Aluminum Oxide for Hydrogenation Catalysis

Anodized aluminum oxides (AAOs) are synthesized and used as catalyst support in combination with Ru as metal in hydrogenation catalysis. SEM and TEM analysis of the as-synthesized AAOs reveal uniform, ordered nanotubes with pore diameters of 18 nm, which are further characterized with Kr physisorption, XRD and FTIR spectroscopy. After impregnation of the AAOs with Ru, the presence of Ru nanoparticles inside the tubular pores is evidenced clearly for the first time via HAADF-STEM-EDX. The Ru−AAOs have been tested for catalytic activity, which showed high conversion and selectivity for the hydrogenation of toluene and butanal.