Mechanism and nanosize products of the sol-gel reaction using diphenylsilanediol and 3-methacryloxypropyltrimethoxysilane as precursors

We use a first-principles calculation and small-angle neutron scattering (SANS) to investigate the mechanism and the nanosize products of the sol-gel reaction with diphenylsilanediol (DPD) and 3-methacryloxypropyltrimethoxysilane (MEMO) precursors in synthesizing a hybrid waveguide material. It is predicted that switching between a DPD hydroxyl and a MEMO methoxy with a reaction rate of 6.8 x 10(-6) s(-1) at 300 K is the fastest process for the first reaction step, thus generating diphenylmethoxysilanol (DPM) and 3-methacryloxypropyldimethoxysilanol (MEDO) as products. However, we determine that this reaction pathway could be modified by the presence of the H2O released from a catalyst such as Ba(OH)2.H2O. Next, switching between the DPM hydroxyl and the MEDO methoxy is followed to generate diphenyldimethoxysilane (DPDM) and 3-methacryloxypropylmethoxysilanediol (MEMDO). However, condensation between a MEMDO hydroxyl and a DPDM methoxy is found to be most favorable for the third reaction step, which generates the DPDM-MEMDO dimer and CH3OH molecule as products. In a similar fashion, a DPDM methoxy of the DPDM-MEMDO dimer can condense with a MEMDO hydroxyl of the second DPDM-MEMDO dimer to increase the chain, but its reaction rate of 2.8 x 10(-11) s(-1) is predicted to be about 5 times smaller than that between a DPDM methoxy and a MEMDO hydroxyl. This implies that the reaction rate for the larger nanostructures becomes smaller. Additionally, our SANS measurements determine that the final products from our sol-gel reaction are on the nanometer scale, at sizes from 1.76 to 2.36 nm.     

Improved Compatibility of Styrene-Maleic Anhydride Copolymer/Polyethylene Blends Through Reactive Mixing

Abstract

To improve the compatibility of styrene-maleic anhydride copolymer/low density polyethylene (SMA/LDPE) blends, LDPE grafted with 2-hydroxyethyl methacrylate-isophorone diisocyanate (LDPE-g-HI) was prepared and blended with SMA of which anhydride was converted to carboxylic acid (SMAAc). The infrared spectra of LDPE-g-HI established the presence of isocyanate group. In the blend morphology, some adhesions between the two phases and much finer dispersions were observed in the SMAAc/LDPE-g-HI blends, indicating that chemical reactions took place during the melt blending. The lower heat capacity change at the glass transition temperature demonstrated that chemical bonds were produced in the SMAAc/LDPE-g-HI blends. From the results of the rheological test, it was found that strong positive deviation from the mixing rule occurred in viscosity for the SMAAc/LDPE-g-HI blends, concerning with good adhesion and finer dispersions. In the measurement of tensile property, the improved mechanical properties for the SMAAc/LDPE-g-HI blends were shown.     

Synthesis of ZrO<Subscript>2</Subscript> nanoparticles for liquid scintillators used in the detection of neutrinoless double beta decay

We synthesized liquid scintillators incorporating ZrO₂ nanoparticles for application in neutrinoless double beta decay experiments. ZrO₂ nanoparticles of less than 10 nm in size were synthesized with sub- and supercritical hydrothermal methods. The Zr concentrations in the liquid scintillators were determined to be up to 1.4 wt% with inductively coupled plasma analysis, and the liquid scintillators were transparent to scintillation. These results indicate that these methods are applicable for the preparation of liquid scintillators for neutrinoless double beta decay experiments.     

High magnetic field solid‐state NMR analyses by combining MAS,MQ‐MAS,homo‐nuclear and hetero‐nuclear correlation experiments

A general strategy of structural analysis of alumina silicate by combining various solid‐state NMR measurements such as single pulse, multi‐quantum magic angle spinning, double‐quantum homo‐nuclear correlation under magic angle spinning (DQ‐MAS), and cross‐polarization hetero‐nuclear correlation (CP‐HETCOR) was evaluated with the aid of high magnetic field NMR (800 MHz for ¹H Larmor frequency) by using anorthite as a model material. The high magnetic field greatly enhanced resolution of ²⁷Al in single pulse, DQ‐MAS, and even in triple‐quantum magic angle spinning NMR spectra. The spatial proximities through dipolar couplings were probed by the DQ‐MAS methods for homo‐nuclear correlations between both ²⁷Al–²⁷Al and ²⁹Si–²⁹Si and by CP‐HETCOR for hetero‐nuclear correlations between ²⁷Al–²⁹Si in the anorthite framework. By combining various NMR methodologies, we elucidated detailed spatial correlations among various aluminum and silicon species in anorthite that was hard to be determined using conventional analytical methods at low magnetic field. Moreover, the presented approach is applicable to analyze other alumina‐silicate minerals. Copyright © 2012 John Wiley & Sons, Ltd.     

Thermal stability of ester linkage in the presence of 1,2,3‐Triazole moiety generated by click reaction

The copper(I)‐catalyzed alkyne‐azide cycloaddition (CuAAC), so‐called “click” reaction, is one of most useful synthetic strategies to connect two polymer chains. 1,2,3‐Triazole ring (TA) produced by the click reaction has good thermal and chemical stability. However, we observed that block copolymers synthesized by the click reaction showed thermal degradation to give homopolymers when they are thermally annealed at high temperature, which is required for obtaining equilibrium microdomain structure. To investigate the origin of thermal instability of block copolymers, we synthesized model polystyrenes (PSs) using systematically designed bi‐functional atom transfer radical polymerization (ATRP) initiators containing TA. PS including both ester and TA groups showed thermal decomposition at relatively low temperature (e.g., 140 °C). MALDI‐TOF analysis clearly demonstrated that the cleavage site is the ester group adjacent to TA. We also found that the bromine group located at the polymer chain end plays an important role in pyrolysis of ester groups at low temperature. The pyrolysis occurs by syn‐elimination of the ester group. This result implies that the phase behavior of block copolymer synthesized by click reaction should be carefully investigated when high temperature thermal annealing is required. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 427–436     

Efficient and accurate procedure for selecting ground motions matching target response spectrum

Linear and nonlinear response history analyses have become popular in seismic design and seismic performance evaluation procedures. The accuracy of analysis results depends not only on the accurate analytic models for structures but also on the proper selection of input ground motions. The purpose of this study is to develop a computationally efficient and accurate procedure for selecting ground motions considering the target response spectrum mean and variance, and the correlations between response spectra of different periods. In this procedure, a number of response spectra are simulated equal to the number of ground motions to be selected, using a Monte Carlo simulation. Subsequently, ground motions are selected from a ground motion library to individually match the simulated response spectra, using the proposed selection procedure. This procedure is computationally efficient and accurate in selecting a ground motion that best matches a simulated response spectrum and in determining a scaling factor for the selected ground motion. In order to further improve the selection result, multiple sets of simulated response spectra are considered. The accuracy and efficiency of the proposed procedure are verified with numerical examples.