High magnification microscopic system focusing on transparent liquid/liquid interface formed in thin-layer two-phase microcell.

A thin-layer two-phase microcell was fabricated without an adhesive, which showed no fluorescence and resisted acids. The lower hollow of the microcell was thin (0.18 mm), which was in the range of the working distance of the used objective of high magnification (60x) and high numerical aperture (1.2). A reflection method using probe light was newly employed for focusing the objective on a transparent dodecane/water interface strictly with an inverted microscope. The system was applied to in situ fluorescence microscopic measurements of the dynamics of single DNA molecules (165600 base pairs) at the dodecane/water interface.     

Development of a “Built-in” Scanning Near Field Microscope Head for an Atomic Force Microscope System and Stress Mapping of an Al2O3/ZrO2 Eutectic Composite

We constructed a scanning near-field optical microscope (SNOM) on a commercially available atomic force microscopy (AFM) apparatus (SPM-9500J2; Shimadzu Corp.) to measure the stress distribution in ceramic composite materials. Features of our SNOM system are: (1) a compact SNOM head substituted for the original AFM head; (2) a wide scanning range (125 × 125 μm²) inherited from the original scanner; (3) use of conventional shear-force regulation; (4) an optical system for the illumination-collection (I-C) mode; (5) excitation by a 488 nm line of an Ar-ion laser, and (6) light detection by photon counting or a polychromator equipped with an electronically cooled charge coupled device (CCD). This SNOM system was used to measure the surface structure and stress distribution of an Al₂O₃/ZrO₂ eutectic composite. We simultaneously measured topographic images and fluorescence spectra of an Al₂O₃/ZrO₂ eutectic composite. We estimated its peak intensity, peak position, and peak width from the fluorescence spectrum during scanning, which respectively correspond to the abundance of Al₂O₃, stress in the grain, and the anisotropy of that stress. Mapping images showed that the stress and its anisotropy were weaker in the center of the Al₂O₃ grain than its boundary between Al₂O₃ and ZrO₂. That observation suggests that Al₂O₃ underwent intense anisotropic stress induced by volume expansion in the phase transition of ZrO₂ from the cubic phase to the monoclinic phase during preparation.     

Introduction of several trifluoromethyl groups onto the activated aromatic materials with CF3TMS-CuI-KF system

Trifluoromethylation onto the tetrafluorophthalonitrile and tetrafluoroisophthalonitrile has been carried out using CF₃TMS-CuI-KF system, and it was demonstrated that these trifluoromethylation enabled us to successfully construct di- and/or tri-trifluoromethylated benzonitriles via the decyanotrifluoromethylation.     

Measurement on Spot Size Dependence of Dense WDM Dielectric Multilayer Filters

We present the spot size dependence of dielectric multilayer filters for use in dense WDM systems. We found large dependences of filter performances on the spot size and the incident angle of input light, which should be important for miniaturizing multi-channel add/drop filters.     

Formulation for XPS spectral change of oxides by ion bombardment as a function of sputtering time

XPS measurement revealed that the original state of TiO₂ was changed to Ti₂O₃ and TiO by ion bombardment. TiO₂ decreased and Ti₂O₃ increased at the initial stage. TiO increased at a later stage than Ti₂O₃. Each of them saturated after enough sputtering time.A formulation was proposed in order to explain the change of XPS spectra for oxides as a function of ion sputtering time. This formulation was based on reaction equations that contain two reduction processes (from TiO₂ to Ti₂O₃ and from Ti₂O₃ to TiO), and sputtering effects. Using four fitting parameters (two reduction coefficients, sputtering yield and information depth), the present formula was fitted to the experimental results. The fitting results agree satisfactorily with the experimental results. The calculation shows that the reduction coefficient from TiO₂ to Ti₂O₃ is about ten times larger than that from Ti₂O₃ to TiO. This calculation predicts that surface composition of an oxide that is changed by ion bombardment will reach a different value depending on its bulk composition. Moreover, the present formulation can determine the chemical states of compounds changed by ion bombardment.     

Numerical reconstruction of an infrared wavefront utilizing an optical phase modulation device

We utilize nitroanisole, that absorbs infrared (IR) radiation as heat, as an optical modulation device based on a thermal process. The nitroanisole exhibits a thermal lens effect, i.e. a temperature dependent refractive index. Hence, the nitroanisole can induce phase modulation to visible light, in direct response to intensity of the incident IR radiation. The proposed method can be used to obtain the phase modulation distribution that corresponds to the IR intensity distribution, i.e. the IR hologram itself, on the nitroanisole by examining the phase map of visible light that is modulated upon passing through the nitroanisole. The IR wavefront can be reconstructed by calculating extracted IR holograms through the Fresnel transform. It is verified that both the amplitude and the phase of the IR wavefront can be reconstructed accurately by proposed method.     

Tail probabilities of the limiting null distributions of the Anderson–Stephens statistics

For the purpose of testing the spherical uniformity based on i.i.d. directional data (unit vectors) z_i, i=1,…,n, Anderson and Stephens (Biometrika 59 (1972) 613–621) proposed testing procedures based on the statistics S_max=max_u S(u) and S_min=min_u S(u), where u is a unit vector and nS(u) is the sum of squares of u′z_i's. In this paper, we also consider another test statistic S_range=S_max−S_min. We provide formulas for the P-values of S_max, S_min, S_range by approximating tail probabilities of the limiting null distributions by means of the tube method, an integral-geometric approach for evaluating tail probability of the maximum of a Gaussian random field. Monte Carlo simulations for examining the accuracy of the approximation and for the power comparison of the statistics are given.     

Synthesis of Bioactive and Porous Organic-Inorganic Hybrids for Biomedical Applications

Bioactivity has been exhibited by a limited range of ceramics since the invention of Bioglass®. Recently, some bioactive polymeric organic-inorganic hybrids were introduced, including not only organically modified silicates (Ormosils) synthesized from polydimethylsiloxane (PDMS) and tetraethoxysilane but also those with gelatin and 3-glycidoxypropyl-tremethoxysilane. Preparation of the bulk and porous hybrids and their polymeric structures analyzed by Si NMR spectroscopy were presented. In vitro bioactivity or apatite deposition in a simulated body fluid of the Kokubo recipe were also described for those hybrids. Freeze-drying techniques introduced porosity (up to 90%) and pores extending in a preferred direction.     

A facile non-oxidative method for synthesizing 1,3-disubstituted pyrroles from pyrrolidine and aldehydes

Reactions of pyrrolidine with 2 equiv of aldehydes without any catalyst in a pressurized vessel at 140–200 °C yielded 1,3-disubstituted pyrroles. -Branched aldehydes gave fairly good yields of the corresponding products by this method, which provides a facile non-oxidative procedure for synthesizing 1,3-dialkylpyrroles from inexpensive pyrrolidine and aldehydes.