Development of an HPTLC‐based diagnostic method for invasive aspergillosis

A rapid, sensitive and specific high‐performance thin‐layer chromatographic (HPTLC) method was developed and validated for determination of gliotoxin in Aspergillus infected immunocompromised patients with invasive aspergillosis (IA). Densitometric analysis of gliotoxin was carried out in the absorbance mode at 254 nm after single‐step extraction with chloroform. The method uses TLC aluminum plates pre‐coated with silica gel 60F‐254 as a stationary phase and toluene–isoamyl alcohol–methanol (10:0.5:0.5, v/v/v) as mobile phase, which gives compact spot of gliotoxin (R_f = 0.51). The calibration curve was linear (r² ≥ 0.994) between peak area and concentration in the tested range of 100–1000 ng spot^?1 with minimum detectable range 0.025 ng μ^?1 of serum sample. The mean ± SD value of slope and intercept of the standard chromatogram of gliotoxin were found to be 523.2 ± 1.555635 and 915.8 ± 30.68843, respectively. The developed method is simple, rapid, precise and less costly than earlier diagnostic methods, and different serum samples can be run on a single TLC plate for comparative analysis. The proposed method can be used to analyze gliotoxin in patient serum for easy, rapid and cost‐effective diagnosis of IA. Copyright © 2009 John Wiley & Sons, Ltd.     

Meltblown fibers: Influence of viscosity and elasticity on diameter distribution

Both melt viscosity (η_o) and elasticity (correlated here with the longest melt relaxation time λ₁) were found to control the diameter distribution of meltblown fibers. Fibers were formed by melt blowing binary polystyrene (PS) blends containing widely differing component molecular weights using a custom-built laboratory apparatus. Varying the concentration and molecular weight of a high molecular weight PS provided independent control over η_o and λ₁. These rheological parameters influence the average diameter (d_av) and the distribution of diameters (coefficient of variation, CV) of meltblown fibers in different ways. Increasing η_o leads to an increase in d_av but has little impact on CV. On the other hand, increasing λ₁ beyond a threshold value reduces CV while simultaneously increasing d_av. A one-dimensional slender-jet theoretical model with both upper convected Maxwell and Phan–Thien and Tanner constitutive equations was developed to investigate the influence of viscoelasticity and processing parameters on the properties of meltblown fibers. This model predicts a strong dependence of fiber diameter on the air shear stress and variations in fiber diameter with viscoelasticity that are in qualitative agreement with the experimental results. We believe these results suggest that carefully controlling the viscoelastic profile of polymers used in melt blowing is a viable approach for producing nanofibers with narrow fiber diameter distributions using current commercial equipment.     

Gravity induced particle production in earth’s gravitational field in TeV region

We discuss the production of particles via interaction with the earth’s gravitational field. Explicit calculations are done for high energy scalars passing through earth’s gravitational field. We show for example, that the width for the scalar processφ→3φ can become comparable with a typical weak decay width at an energy scale of a few TeV. (Similar conclusions can be drawn about particles that ultimately couple to some scalar field.) We speculate that similar processes may be responsible for many of the anomalies in the 10–10⁴ TeV experimental data.     

Improvement in mechanical and optical properties of vapour chopped vacuum evaporated PANI/PMMA composite thin film

PANI/PMMA composite was synthesized by emulsion polymerization pathway and the composite thin film was obtained by vacuum evaporation. The effect of vapour chopping and varying PMMA concentration was also studied. The FTIR spectra showed that the PANI/PMMA composite thin film deposited as a short chain oligomers. Increase in transmittance and decrease in refractive index was obtained with increasing concentration of PMMA, which further increased the adhesion and decreased intrinsic stress. The vapour chopping improved its optical as well as mechanical properties and produced smoother surface morphology. Increase of PMMA made the film more amorphous and does not change its band gap.     

Wetting and phase separation at surfaces

We study the problem ofsurfacedirected spinodal decomposition, viz., the dynamical interplay of wetting and phase separation at surfaces. In particular, we focus on the kinetics of wetting-layer growth in a semi-infinite geometry for arbitrary surface potentials and mixture compositions. We also present representative results for phase separation in confined geometries, e.g., cylindrical pores, thin films, etc.     

FRET Enhancement in Aluminum Zero‐Mode Waveguides

Zero‐mode waveguides (ZMWs) can confine light into attoliter volumes, which enables single molecule fluorescence experiments at physiological micromolar concentrations. Of the fluorescence spectroscopy techniques that can be enhanced by ZMWs, Förster resonance energy transfer (FRET) is one of the most widely used in life sciences. Combining zero‐mode waveguides with FRET provides new opportunities to investigate biochemical structures or follow interaction dynamics at micromolar concentrations with single‐molecule resolution. However, prior to any quantitative FRET analysis on biological samples, it is crucial to establish first the influence of the ZMW on the FRET process. Here, we quantify the FRET rates and efficiencies between individual donor–acceptor fluorophore pairs that diffuse into aluminum zero‐mode waveguides. Aluminum ZMWs are important structures thanks to their commercial availability and the large amount of literature that describe their use for single‐molecule fluorescence spectroscopy. We also compared the results between ZMWs milled in gold and aluminum, and found that although gold has a stronger influence on the decay rates, the lower losses of aluminum in the green spectral region provide larger fluorescence brightness enhancement factors. For both aluminum and gold ZMWs, we observed that the FRET rate scales linearly with the isolated donor decay rate and the local density of optical states. Detailed information about FRET in ZMWs unlocks their application as new devices for enhanced single‐molecule FRET at physiological concentrations.     

Stochastic Analysis of Macrodispersion in a Semi‐Confined Aquifer

In this paper, the macroscopic dispersion resulting from one and twodimensional flows through a semiconfined aquifer with spatially variable hydraulic conductivity K which is represented by a stationary (statistically homogeneous) random process is analyzed using the spectral representation technique. Stochastic fluctuation equations of the steady flow and solute transport are solved to construct the macroscopic dispersive flux and evaluate the resulting macrodispersivity tensor in terms of the leakage factor and input covariances describing the hydraulic conductivity in a semiconfined aquifer bounded by a leaky layer above and an impervious stratum below. The macrodispersivity tensor is studied using some convenient forms of the log hydraulic conductivity process. The sensitivity of the resulting macrodispersivity to the input covariances is discussed along with the influence of the leakage factor for both one and twodimensional flows. It is found that the longitudinal macrodispersivities are increased due to the presence of leakage, while the transverse macrodispersivities are reduced due to leakage.