Copper ferrite superparamagnetic nanoparticles as a heterogeneous catalyst for directed phenol/formamide coupling

The copper ferrite-catalyzed, directed coupling of ortho-arylated phenols and dialkylformamides in the presence of a peroxide oxidant is described. Acyclic and cyclic amides were compatible with the reaction conditions. The copper ferrite catalyst is heterogeneous since substantial leaching was not detected and re-use of the catalyst for 9 consecutive reactions proceeded without a significant decrease in yield. To the best of our knowledge, this transformation has not been previously performed under heterogeneous catalysis conditions.     

Highly sensitive and selective assay method for iodide ion determination based on gold nanoparticles conjugated with glycol chitosan

A sensitive colorimetric method for the determination of iodide ions was developed using gold nanoparticles (AuNPs) functionalised with glycol chitosan (GCS). The iodide ions were at the centre of the O–I^––O coordination structure, formed with the GCS-AuNPs, reducing their interparticle distance and inducing aggregation. Time-of-flight secondary ion mass spectrometry analyses showed that the bound iodide ions were coordinated to the oxygen atoms of the ethylene glycol in GCS, with this aggregation leading to a considerable variation in colour from light red to dark violet. Using this GCS-AuNP probe, the iodide ion concentration in environmental, biological and pharmaceutical samples could be determined by both the naked eye and UV-Vis spectroscopy. Additionally, the sensitivity of the detection was found to be markedly enhanced at pH 6, where a more pronounced colour change was observed. The absorption ratio A₇₀₀/A₅₂₁ of the functionalised AuNP solution correlated linearly with the iodide ion concentration within the range 0.0–10.0 mg/L, and the limits of detection in tap water, pond water, and bovine serum solution were 3.5, 3.6, and 3.4 μg/L, respectively. The present assay method can thus be utilised to rapidly measure the concentration of iodide ions in aqueous samples.     

Hydrogen bonding nature between calix[6]arene and piperidine/triethylamine

We investigated the binding nature of the 1,2,3-alternate calix[6]arene with one piperidine, two piperidines, and two triethyl amines with a special emphasis on the hydrogen bonding networks by density functional theory calculations. The 1,2,3-alternate calix[6]arene strongly binds with piperidines and triethylamines at two different binding sites, exo and endo sites. In the two binding sites, the hydrogen bonding nature shows a characteristic difference. In the exo site, there formed only one hydrogen bond, while in the endo site, two hydrogen bonds except for the triethylamine. The proton transfer within the hydrogen bonding and the hydrogen bonding types, normal hydrogen bonding (NHB), short strong hydrogen bond (SSHB), and low barrier hydrogen bonding (LBHB), will be discussed in detail.     

F− Preference of Polyamide Cryptand to Cl−

The variations in geometry structure, IR spectra, as well as the molecular orbitals upon anion recognition for polyamide cryptand are explored with the hybrid density functional theory. The cavity generated by six amide NH groups shrinks upon F ^? recognition because of the strong hydrogen bonds between the amide protons and F ^? , while the cavity expands upon Cl ^? binding because of the strong electron repulsion between the p electron of Cl ^? and the lone pair electrons of the nitrogen atom of the pyridine moieties. The “electropositive field space” …Cl ^? coupling exists when Cl ^? is recognized. The strong anion binding energy with F ^? indicates that the polyamide cryptand prefers F ^? to Cl ^? .     

Tuning the band-gap energy of TiO2-xCx nanoparticle for high performance photo-catalyst

We describe a method tuning the band-gap energy (E_g) of visible light sensitive TiO_2-xC_x nanoparticle. E_g tends to become smaller with the increase in the amount of carbon dopant in TiO_2-xC_x nanoparticle due to the increase in excess electrons. Photo-catalytic oxidative activity, however, did not depend on only the value of E_g, but also the energy level of valence band. TiO_1.96C_0.04 nanoparticle having E_g of 2.6 eV showed outstanding performance in oxidative decomposition of phenol under the irradiation of visible light.     

Rapid method for the determination of capsaicin and dihydrocapsaicin in Gochujang using ultra-high-performance liquid chromatography

A sensitive and specific heating block method coupled with ultra-HPLC (u-HPLC) was developed for the analysis of capsaicin in Gochujang and validated by comparing with a conventional HPLC (AOAC Method 995.03). The method validation parameters yielded good results, including linearity, precision, accuracy, and recovery. The u-HPLC separation was performed on a reversed C18 column (50 x 2 mm id, particle size 2 microm), followed by fluorescence detection (excitation 280 nm, emission 325 nm). Methanol was used as the extracting solvent, and the amount of sample taken was approximately 0.2 g; the optimum amount of extraction solvent and extraction time were 15 mL and 1 h, respectively. The recovery of capsaicin in Gochujang was more than 93%, and the LOD and LOQ of the u-HPLC analysis were 0.05 and 0.16 microg/g for capsaicin and 0.05 and 0.16 microg/g for dihydrocapsaicin. The calibration graphs for capsaicin and dihydrocapsaicin were linear from 0.2 to 10.0 microg/mL for u-HPLC. The interday and intraday precisions (RSD values) were < 6.27%.     

A near-infrared fluorescent sensor for detection of cyanide in aqueous solution and its application for bioimaging

A new NIR fluorescent sensor based on an amine-substituted heptamethine cyanine dye displayed a highly selective fluorescence enhancement with cyanide in aqueous solutions, and was applied for the imaging of anthropogenic and biogenic cyanide.     

Radiolysis of 1-naphthol in aqueous solutions

The effects of absorbed doses, initial pH and 1-naphthol concentration onto its radiolysis in aqueous sulphuric and hydrochloric acids by gamma rays from ⁶⁰Co were investigated. Under the experimental conditions, 1-naphthol degradation yields increased with increasing the absorbed doses (0.3–3.0 kGy) and with decreasing the initial 1-naphthol concentration (20–1 ppm). It was found out that the hydrated electrons did not play any significant roles in 1-naphthol radiolysis, as the degradation yields were higher at pH₀ ~ 0.46 compared to those at pH₀ ~ 2.0–5.0. The corresponding radiolytic yields G(−1-naphthol) were (6.13 ± 1.00)) × 10⁻² and (5.11 ± 0.22) × 10⁻² μmol/J in sulphuric acids, (15.61 ± 3.85) × 10⁻² and (4.76 ± 0.48) × 10⁻² μmol/J in hydrochloric acids. 1-Naphthol degradation rates could be described by the kinetic equations of pseudo-first-order reactions. An empirical relation between the observed reaction constants k _D and the initial 1-naphthol concentrations was established, enabling to predict the absorbed doses required for a given treatment efficiency. Three products of 1-naphthol degradation were revealed using an HPLC/UV procedure.     

Determination of microelement distribution in different components of soil-plant systems

The leaves, stem, and roots of two types of shrubs (tea (Camellia sinensis) and sweet leaf (Sauropus androgynus)) and two types of herbs (vetiver grass (Vetiveria zizanioides L. Nash) and maize (Zea mays L)) and the Thucuc soil where the plants were growing were collected to be studied. The contents of 22 elements in the samples were determined by three methods: X-Ray fluorescence analysis (XRFA), gamma activation analysis (GAA), and the tracking method to study the distribution of these elements in plants and the soil-plant relationship. This study was carried out at the Flerov Laboratory of Nuclear Reactions (FLNR), Joint Institute for Nuclear Research (JINR), Dubna, Russia. The distribution of the elements in the soil-plant system was studied.