Real‐Time Measurement of the Size Distribution of Diesel Exhaust Particles using a Portable 4‐stage Electrical Low Pressure Impactor

For this study, a 4 stage electrical low pressure impactor was designed to measure the real‐time size distribution of diesel particulate matter (DPM). For the performance evaluation, sodium chloride (NaCl) particles and dioctyl sebacate (DOS) particles were used. After evaluating the collection efficiency of each stage of the impactor, the size distributions of test particles were estimated using electrical current data and their inversion algorithm, and this was found to agree with the results obtained by a scanning mobility particle sizer (SMPS). For measurement of DPM, a common‐rail direct injection (CRDI) diesel engine, for engine speeds of 1,200 rpm and 1,500 rpm at 2.7 kgf·m, was used. Therefore, it was found that the size distribution of the DPM could be easily obtained, with the currents measured by the impactor and the data inversion algorithm, in less than 5 seconds. Furthermore, the effective density of the DPM could be obtained using the calculated results and the SMPS data.     

Synthesis and crystal structures of two zinc(II) complexes derived from N-isopropyl-N′-[1-(2-methoxyphenyl)methylidene]ethane-1,2-diamine

Two isostructural mononuclear zinc(II) complexes, [ZnLBr₂] (I) and [ZnLI₂] (II), derived from the Schiff base N-isopropyl-N′-[1-(2-methoxyphenyl)methylidene]ethane-1,2-diamine (L), have been synthesized and characterized by elemental analysis, IR spectra, and X-ray single-crystal diffraction. The crystal of I is monoclinic: space group P2₁/n, a = 14.476(1) Å, b = 7.327(1) Å, c = 17.528(1) Å, β = 101.153(1)°, V = 1824.0(3) ų, Z = 4. The crystal of II is monoclinic: space group P2₁/n, a = 14.482(1), b = 7.329(1), c = 17.528(1)Å, β = 101.195(2)°, V = 1825.0(3)ų, Z = 4. The Zn atom in each complex is four-coordinated in a tetrahedral coordination, with one imine N and one amine N atoms of L, and two halide atoms. Both complexes and the Schiff base were tested in vitro for their antibacterial activities.     

The application of an in situ karyotyping technique for mesenchymal stromal cells: a validation and comparison study with classical G-banding

The cytogenetic analysis of mesenchymal stromal cells (MSCs) is essential for verifying the safety and stability of MSCs. An in situ technique, which uses cells grown on coverslips for karyotyping and minimizes cell manipulation, is the standard protocol for the chromosome analysis of amniotic fluids. Therefore, we applied the in situ karyotyping technique in MSCs and compared the quality of metaphases and karyotyping results with classical G-banding and chromosomal abnormalities with fluorescence in situ hybridization (FISH). Human adipose- and umbilical cord-derived MSC cell lines (American Type Culture Collection PCS-500-011, PCS-500-010) were used for evaluation. The quality of metaphases was assessed by analyzing the chromosome numbers in each metaphase, the overlaps of chromosomes and the mean length of chromosome 1. FISH was performed in the interphase nuclei of MSCs for 6q, 7q and 17q abnormalities and for the enumeration of chromosomes via oligo-FISH in adipose-derived MSCs. The number of chromosomes in each metaphase was more variable in classical G-banding. The overlap of chromosomes and the mean length of chromosome 1 as observed via in situ karyotyping were comparable to those of classical G-banding (P=0.218 and 0.674, respectively). Classical G-banding and in situ karyotyping by two personnel showed normal karyotypes for both cell lines in five passages. No numerical or structural chromosomal abnormalities were found by the interphase-FISH. In situ karyotyping showed equivalent karyotype results, and the quality of the metaphases was not inferior to classical G-banding. Thus, in situ karyotyping with minimized cell manipulation and the use of less cells would be useful for karyotyping MSCs.     

The immune-stimulating peptide WKYMVm has therapeutic effects against ulcerative colitis

In this study, we examined the therapeutic effects of an immune-stimulating peptide, WKYMVm, in ulcerative colitis. The administration of WKYMVm to dextran sodium sulfate (DSS)-treated mice reversed decreases in body weight, bleeding score and stool score in addition to reversing DSS-induced mucosa destruction and shortened colon. The WKYMVm-induced therapeutic effect against ulcerative colitis was strongly inhibited by a formyl peptide receptor (FPR) 2 antagonist, WRWWWW, indicating the crucial role of FPR2 in this effect. Mechanistically, WKYMVm effectively decreases intestinal permeability by stimulating colon epithelial cell proliferation. WKYMVm also strongly decreases interleukin-23 and transforming growth factor-β production in the colon of DSS-treated mice. We suggest that the potent immune-modulating peptide WKYMVm and its receptor FPR2 may be useful in the development of efficient therapeutic agents against chronic intestinal inflammatory diseases.     

Negative-pressure wound therapy induces endothelial progenitor cell mobilization in diabetic patients with foot infection or skin defects

Non healing chronic wounds are difficult to treat in patients with diabetes and can result in severe medical problems for these patients and for society. Negative-pressure wound therapy (NPWT) has been adopted to treat intractable chronic wounds and has been reported to be effective. However, the mechanisms underlying the effects of this treatment have not been elucidated. To assess the vasculogenic effect of NPWT, we evaluated the systemic mobilization of endothelial progenitor cells (EPCs) during NPWT. Twenty-two of 29 consecutive patients who presented at the clinic of Seoul National Universty Hospital between December 2009 and November 2010 who underwent NPWT for diabetic foot infections or skin ulcers were included in this study. Peripheral blood samples were taken before NPWT (pre-NPWT) and 7–14 days after the initiation of NPWT (during-NPWT). Fluorescence-activated cell sorting (FACS) analysis showed that the number of cells in EPC-enriched fractions increased after NPWT, and the numbers of EPC colony forming units (CFUs) significantly increased during NPWT. We believe that NPWT is useful for treating patients with diabetic foot infections and skin ulcers, especially when these conditions are accompanied by peripheral arterial insufficiency. The systemic mobilization of EPCs during NPWT may be a mechanism for healing intractable wounds in diabetic patients with foot infections or skin defects via the formation of increased granulation tissue with numerous small blood vessels.     

Agar-based heat-sensitive gel with linear thermal response over 65–80 °C

A nontoxic heat-sensitive gel containing 1.5 % (w/v) agar and 25 % (w/v) bovine serum albumin (BSA) was fabricated in this study. Optical density measurements with 808 nm near-infrared (NIR) laser indicated that, in spite of its BSA content, the current agar + BSA gel remained similar to agar only gel in terms of its optical response to NIR laser. The thermal response of the current agar + BSA gel to high temperatures was quantified using magnetic resonance imaging (MRI). According to the MRI measurements of T2 relaxation rate as a function of heating temperature, the current agar + BSA gel showed a linear response to heating temperatures between 65 and 80 °C, while it remained thermally stable at temperatures up to 80 °C. Therefore, the current agar + BSA gel can be used as thermal dosimeters or volumetric heat-sensitive gel phantoms in typical thermal therapy regime.     

Synthesis of Bi-doped TiO2 Nanotubes and Enhanced Photocatalytic Activity for Hydrogen Evolution from Glycerol Solution

Bi‐doped TiO₂ nanotubes with variable Bi/Ti ratios were synthesized by hydrothermal treatment in 10 mol·L^?1 NaOH (aq.) through using Bi‐doped TiO₂ particles derived from conventional sol‐gel method as starting materials. The effects of Bi content on the morphology, textural properties, photo absorption and photocatalytic activity of TiO₂ nanotubes were investigated. The scanning electron microscopy (SEM), transmission electron microscopy (TEM), X‐ray diffraction (XRD) and X‐ray photoelectron spectroscopy (XPS) observations of the obtained samples revealed the formation of titanate nanotube structure doped with Bi, which exists as a higher oxidation state than Bi³⁺. Bi‐doping TiO₂ nanotubes exhibited an extension of light absorption into the visible region and improved photocatalytic activities for hydrogen production from a glycerol/water mixed solution as compared with pure TiO₂ nanotubes. There was an optimal Bi‐doped content for the photocatalytic hydrogen production, and high content of Bi would retard the phase transition of titanate to anatase and result in morphology change from nanotube to nanobelt, which in turn decreases the photocatlytic activity for hydrogen evolution.     

Facile Fabrication of Multi‐targeted and Stable Biochemical SERS Sensors

The direct transfer of single‐crystalline Au nanowires (NWs) onto Au substrates was achieved by a simple attachment and detachment process. In the presence of a lubricant, Au NWs grown vertically on a sapphire substrate were efficiently moved to an Au substrate through van der Waals interactions. We demonstrate that the transferred Au NWs on the Au substrate can act as sensitive, reproducible, and long‐term‐stable surface‐enhanced Raman scattering (SERS) sensors by detecting human α‐thrombin as well as Pb²⁺ and Hg²⁺ ions. These three biochemically and/or environmentally important analytes were successfully detected with high sensitivity and selectivity by Au NW‐SERS sensors bound by a thrombin‐binding aptamer. Furthermore, the as‐prepared sensors remained in working order after being stored under ambient conditions at room temperature for 80 days. Because Au NWs can be routinely transferred onto Au substrates and because the resultant Au NW‐SERS sensors are highly stable and provide with high sensitivity and reproducibility of detection, these sensors hold potential for practical use in biochemical sensing.