Chemical triple-mutant boxes for quantifying cooperativity in intermolecular interactions

Chemical double-mutant cycles have been used to quantify intermolecular functional-group interactions in H-bonded zipper complexes in chloroform. If the same interaction is measured in zippers of different overall stability, the double-mutant cycles can be combined to produce a triple-mutant box. This construct quantifies cooperativity between the functional group interaction of interest and the other interactions that are used to change the overall stability of the complexes. The sum of two edge-to-face aromatic interactions (-2.9 +/- 0.5 kJ mol-1) is shown to be insensitive to changes of up to 13.7 +/- 0.2 kJ mol-1 in the overall stability of the complex. In principle, enthalpic cooperative effects caused by entropy-enthalpy compensation could perturb the measurement of intermolecular interactions when using the double-mutant cycle approach, but these experiments show that, for this system, the magnitude of the effect lies within the error of the measurements.     

Carbon composite electrodes: surface and electrochemical properties

Electrodes based on particulate carbon-epoxy or silicone composites have been formed and characterised using electrochemical methods, scanning electron microscopy and scanning electrochemical microscopy. These composites are rigid, exhibit high electrical conductivity and are stable in organic solvents for prolonged periods. The bulk resistance of the Araldite-M and Araldite-CW2215 based electrodes is low, 130+/-12 and 185+/-15 ohms, respectively. In contrast, the bulk resistance of the silicone based electrodes is 1480+/-112 ohms. The uncompensated resistance of electrochemical cells where the composites act as working electrodes is significantly larger than that expected on the basis of solution resistance alone, i.e., up to 7.5 kohms in the case of the silicone composites. These results are interpreted in terms of the presence of pores within the composite material. The response times of the composite electrodes to changes in the applied potential is between 3.1 and 7.2 ms which, although almost an order of magnitude longer than a comparable glassy carbon electrode, is sufficiently rapid to give useful voltammetric data for scan rates of several V s(-1). Close to ideal reversible cyclic voltammetry is observed for ferrocene under semi-infinite diffusion control for scan rates between 0.01 and 0.1 V s(-1) at the Araldite composites. In contrast, the large resistance associated with the silicone based materials causes quasi-reversible responses to be observed over this range of scan rate. Scan rate dependent cyclic voltammetry and time resolved chronoamperometry responses observed for ferrocene in solution are consistent with those expected for a random array of microelectrodes. Scanning electron microscopy and scanning electrochemical microscopy has been used to image the shape, size and electrochemical activity of the electroactive zones. In the case of Araldite-M, the quality of the electrode surface has been probed by comparing the rate of heterogeneous electron transfer at a composite microelectrode with that found for a carbon fibre electrode. The standard heterogeneous electron transfer rate constant, k degrees , is 6.0+/-0.1 x 10(-3) cm s(-1) for the composite compared to 1.5+/-0.1 x 10(-1) cm s(-1) for the carbon fibre electrode. While the smaller rate constant found for the composite suggests a less pristine surface, k degrees is sufficiently large to support reversible, electron transfer under typical electroanalytical conditions. These fundamental measurements will underpin the development of enzyme based biosensors for use in organic solvents.     

Combined protocol for the analysis of polycyclic aromatic hydrocarbons (PAHs) and polychlorobiphenyls (PCBx) from sediments using focussed microwave assisted (FMW) extraction at atmospheric pressure

A microwave-assisted protocol has been developed using focussed microwaves at atmospheric pressure for the extraction of PAHs and PCBs from sediments. It combines extraction and purification assisted by microwaves. This protocol has been applied to the quantification of 12 individual PAHs, 8 individual PCBs and 8 PCB coeluted mixtures from two Standard Reference Materials and one natural sediment. The results for both classes of compounds (PAHs and PCBs) are good in terms of recoveries, which are always greater than 70% and in most cases around 100%. The reproducibility is also good with coefficients of variation below 10% in most cases. This protocol has the great advantage of saving time, the time dedicated to the preparation / extraction assisted by microwaves being reduced to less than half an hour.     

Chromium speciation in liquid matrices: a survey of the literature

A thorough review of the literature published (1983 - March 1999) on chromium speciation in liquid samples is presented, and analytical techniques used in the 404 articles are summarized. The discussion focuses on atomic spectrometric techniques, which are mainly employed for chromium speciation in liquid matrices (134 articles). Details on the type of pretreatment, species, samples, techniques and analytical features of the methodologies proposed are given.     

Chemistry of the phenoxathiins and isosterically related heterocycles. XXV . Synthesis of 1,6-diazathianthrene from 3-mercaptopyridin-2(1H)-thione via a novel dehydrothiolation reaction in the presence of triethylamine

The generation of the dianion of 3-mercaptopyridin-2(1H)-thione with triethylamine in N,N-dimethylform-amide followed by reaction in the presence of 2-chloronitrobenzene fails to give 1-azathianthrene which is formed in good yield when sodium hydride was employed as the base. The principle product isolated from the reaction was instead 1,6-diazathianthrene. Mechanistic considerations are discussed.     

Makroskonische Diffusion von Methanol in einen Natrium-und einen dekationisierten Y-Zeolith

Ohne Zusammenfassung     

Bassianolone: an antimicrobial precursor of cephalosporolides E and F from the entomoparasitic fungus Beauveria bassiana

We have established the chemical structure of (+)-bassianolone (3), the antimicrobial compound precursor of cephalosporolides E and F, and that of the furan metabolite 4 from the entomopathogenic fungus Beauveria bassiana.     

A multicommutated flow system for determination of bismuth in milk shakes by hydride generation atomic fluorescence spectrometry incorporating on-line neutralization of waste effluent

A highly sensitive method was developed for determination of bismuth in milk shakes by multicommutation hydride generation atomic fluorescence spectrometry (HG-AFS) based on off-line sonication for 10 min with aqua regia 8% (v/v) and on-line waste treatment. The instrumentation and chemistry variables were studied in order to provide the best performance. The limit of detection in the original samples, established for a probability level of 99.6% (k = 3), was 1.67 ng/g Bi. The method provides a fast alternative in control analysis with a sampling throughput of 72 h as compared with 31 h obtained by the classical continuous measurement. Additionally, multicommutation reduces waste generation by a factor of 2.6. The consumption of sample, reductant, and blank, as compared with continuous mode HG-AFS, was reduced 9.6, 4.5, and 13.3 times, respectively. To confirm the accuracy of the method, recovery studies were performed, and excellent agreement between multicommutation and continuous measurement-based values was obtained. Application of the developed methodology for bismuth determination in milk shake samples from the Spanish market provided concentrations ranging from 4.2 to 15.0 ng/mL, and good comparability with data obtained by continuous measurements after microwave-assisted total digestion of samples for a 95% probability level and 12 degrees of freedom was found.     

Complexation behavior of a highly preorganized 7,7-diphenylnorbornane-derived macrocycle: towards the design of molecular clocks

The syntheses of two new cyclophane hosts, 4 and 6, are described. The main difference between them is the higher degree of preorganization of 4 as a consequence of the inclusion of the 7,7-diphenylnorbornane (DPN) subunit. The inner cavity of 4 adopts a belt-shaped structure, while 6 has a twisted geometry. In the solid state, the molecules of macrocycle 6 are stacked along an axis to form nanotubular structures. Compounds 4 and 6 form two of the strongest complexes between arene cyclophanes and Ag(+) reported up to date. The silver cation is located inside the cavity of the macrocycles. The stability of 4.Ag(+) is considerably higher than that of 6.Ag(+). The additional stabilization of 4.Ag(+) is attributed to higher preorganization of macrocycle 4. DNMR experiments as well as theoretical calculations carried out with 4.Ag(+) show evidence of Ag(+)-hopping between two different binding sites inside the macrocycle. This phenomenon could be the basis for the design of molecular clocks.