Simple and Efficient One-Pot Synthesis of 2-Substituted Benzoxazole and Benzothiazole

2-Substituted benzoxazole and benzothiazole were synthesized from condensation of aldehyde and 2-aminophenol or 2-aminothiophenol via a one-pot process using diethyl bromo phoshonate and tert-butyl hypochlorite.     

Synthesis and Antimicrobial Screening of Some Novel Chromones and Pyrazoles with Incorporated Isoxazole Moieties

The title compounds 5a , 5b , 5c , 5d , 5e , 5f , 5g , 5h and 6a , 6b , 6c , 6d , 6e , 6f , 6g , 6h have been synthesized from β‐diketones and chromones, respectively, having 5‐methyl‐3‐phenylisoxazole moiety. Substituted 2‐acetylphenyl 5‐methyl‐3‐phenylisoxazole‐4‐carboxylate 3a , 3b , 3c , 3d , 3e , 3f , 3g , 3h were converted into 1‐(2‐hydroxyphenyl)‐3‐(5‐methyl‐3‐phenylisoxazole‐4‐yl)propane‐1,3‐dione 4a , 4b , 4c , 4d , 4e , 4f , 4g , 4h by Baker–Venketaraman transformation. Further, the cyclodehydration of diketone 4a , 4b , 4c , 4d , 4e , 4f , 4g , 4h with glacial acetic acid in conc. HCl at reflux gave corresponding substituted 2‐(5‐methyl‐3‐phenylisoxazole‐4‐yl)‐4H‐chromen‐4‐one 5a , 5b , 5c , 5d , 5e , 5f , 5g , 5h . The corresponding 5a , 5b , 5c , 5d , 5e , 5f , 5g , 5h react with hydrazine hydrate in presence of glacial acetic acid in ethanol at reflux to furnish 2‐(5‐5(5‐methyl‐3‐phenylisoxazole‐4‐yl)‐1H‐pyrazole‐3‐yl)phenol 6a , 6b , 6c , 6d , 6e , 6f , 6g , 6h . The structures of all newly synthesized compounds have been confirmed by IR, ¹H NMR, mass spectral data, as well as elemental analysis. The synthesized compounds have been screened for their antimicrobial activity. Some of the compounds show better antimicrobial activity as compared with the reference drugs Streptomycin, Ampicillin, Gentamycin, Cefixime, and Ketoconazole.     

Solvent-Free Esterification of Carboxylic Acids and Alcohols in the Presence of Silphos [PCl3-n(SiO2)n] as a Heterogeneous Phosphine Reagent

An efficient solvent-free method for the preparation of esters from various aromatic and aliphatic acids with primary, secondary, and tertiary alcohols using a heterogeneous phosphine reagent, silphos [PCl_3-n(SiO₂)_n], in good yields is reported.     

Practical and Chemoselective Reduction of Acyl Chloride to Alcohol by Borohydride in Aqueous Dichloromethane

A simple methodology for the reduction of acid chlorides to their corresponding alcohols has been developed. Various carboxylic acids were converted to alcohols in excellent yields using NaBH₄-K₂CO₃ in a mixed solvent system of dichloromethane and water (1:1) in the presence of a phase-transfer catalyst at low temperature. The importance of the work is its simplicity, selectivity, excellent yield, and very short reaction time. This new reduction condition has proved to be an excellent chemoselective method for a range of acid chlorides in the presence of various functional groups.     

ZrOCl2·8H2O: An Efficient Catalyst for One-Pot Synthesis of α-Amino Phosphonates Under Solvent-Free Conditions

A highly efficient protocol has been developed for the three-component reaction of an amine, an aldehyde, and diethyl phopshite catalyzed by ZrOCl₂·8H₂O, an environmentally friendly catalyst, at ambient temperature. The catalyst exhibited remarkable activity and tolerated a wide variety of functional groups, providing the desired amino phosphonates in excellent yields under solvent-free conditions. Alternatively, the reaction rate can be significantly enhanced by carrying out the reaction in a monomode microwave reactor as a promoter.     

Preparation of porous titania–silica microspheres for treatment of radioactive waste

Titania–silica microspheres have been prepared by sol–gel process. Internal gelation route, which use hexamethylenetetramine as the source of ammonia was used for the preparation spherical gel particles. A cationic surfactant, cetrimide was added in the feed broth for introducing meso-porosity in the gel network. Further paraffin oil emulsion was incorporated in the feed broth before gelation for the formation of larger pores in the gel network. The spherical gel particles thus obtained were washed and heat treated under controlled conditions to remove the entrapped surfactant, paraffin oil and other organic compounds resulting in highly porous intact titania–silica microspheres. The material was characterized by surface area, porosity and by SEM photomicrographs. The ion exchange property of this material was studied using the sorption of plutonium on this material from carbonate medium by distribution coefficient studies and ion exchange column loading and elution experiments.     

Determination of trace concentrations of thorium in uranium oxide matrix by epithermal instrumental neutron activation analysis

An epithermal instrumental neutron activation analysis (EINAA) method using cadmium filter was standardized to determine trace concentrations of thorium in four samples of uranium oxide (U₃O₈) samples. Samples and thorium standards, wrapped with cadmium foil, were irradiated at a reactor neutron flux of about 10¹² cm^?2 s^?1. Radioactive assay was carried out using a Compton suppressed anticoincidence gamma ray spectrometer consisting of HPGe-BGO detectors coupled to MCA. Concentrations of thorium in these samples were found to be in the range of 15–72 mg kg^?1. EINAA results were validated by determining thorium concentrations in uranium matrix by standard addition method. EINAA results were compared with those obtained by two wet chemical methods namely ion chromatography (IC) and inductively coupled plasma atomic emission spectrometry (ICP-AES). The results obtained by the three methods were found to be in good agreement, indicating further validity of the proposed EINAA method.     

Synthesis,characterisation and mesomorphic properties of ester containing aroylhydrazones and their nickel(II) complexes

A new series of mesogenic aroylhydrazone-based ligands, N-[4-(4′-alkoxy)benzoyloxybenzylidene]-N′-[4″-alkoxybenzoyl]hydrazine with either the same or different peripheral alkyl chains, and nickel(II) complexes of some of them have been synthesised. They were characterised by elemental analyses, Fourier transform infrared, proton and carbon nuclear magnetic resonance and ultraviolet-visible spectroscopy. The mesomorphic properties of these compounds were investigated by differential scanning calorimetry and polarising optical microscopy. All the aroylhydrazones, except those with no lateral chains on either end of the molecule and where m?=?n?=?14, 16, exhibit a monotropic or enantiotropic smectic C mesophase, which are almost insensitive to the peripheral alkoxy chain length. The square planar nickel(II) complexes of the ligands show only an isotropic phase at higher temperature (>175°C) and no mesogenic nature is observed. Density functional theory calculations have been performed using the GAUSSIAN-03 program at the Becke, three-parameter, Lee–Yang–Parr level to obtain the stable electronic structure of the ligand.     

Nucleoside and oligonucleotide pyrene conjugates with 1,2,3-triazolyl or ethynyl linkers: synthesis,duplex stability,and fluorescence changes generated by the DNA-dye connector

Fluorescent nucleosides and oligonucleotides functionalized with pyrene were synthesized using ‘click’ chemistry or the Sonogashira cross-coupling reaction. The dye was connected to position-7 of 7-deaza-2′-deoxyguanosine or to the 2′-deoxyribofuranose moiety. Four different DNA-dye connectors with 1,2,3-triazolyl residues or triple bonds were constructed. Phosphoramidites of the pyrene conjugates (9, 14, 25) were prepared and used in solid-phase synthesis. Short linkers (2, 4) destabilize DNA, while long linkers (1) increased duplex stability. Nucleosides and oligonucleotides with single dye incorporations show linker dependent fluorescence. Linker dependent excimer emission with pyrenes in proximal positions was also observed. A ‘superchromophore’ formed by the 7-deaza-2′-deoxyguanosine ethynylpyrene conjugate shows strong red shifted fluorescence emission at 495 nm.     

Solid phase extraction studies on cellulose based chelating resin for separation,pre-concentration and estimation of Cu2+and Ni2+

Chelating resins based on biopolymers, specifically cellulose, offers a green analytical method for determination of metal ions at trace levels present in various samples. It offers a fast, accurate and simple method for separation and pre-concentration of metal ions at low concentrations, prior to their determination by instrumental method. Cellulose based chelating resin (CELL-GLY) has been synthesised by immobilising glycine on it. CELL-GLY was used for the determination of trace amounts of Cu²⁺ and Ni²⁺ from aqueous solutions before their determination by FAAS. The preparation of CELL-GLY involves simple steps, based on natural and easily available biopolymer cellulose, which makes its use as chelating resin is a green method. The Cu²⁺ and Ni²⁺ can be quantitatively recovered from the CELL-GLY in the pH range 4.8–6.9 and 6.9-7.8 respectively with a recovery of more than 95% for each of these metal ions. Recovery of these metal ions using CELL-GLY was quantitative up to 35 °C. The detection limits for copper and nickel by FAAS were 1.20 ppb and 1.40 ppb, respectively. The method was successfully employed for the determination of trace amounts of Cu²⁺ and Ni²⁺ in various samples.