Carbon monoxide isotope enrichment and separation by pressure swing adsorption

Simulations of three different 3-bed 3-step pressure swing adsorption (PSA) cycles were carried out to study the enrichment and recovery of ¹⁴CO from an isotopic mixture of ¹⁴CO, ¹³CO and ¹²CO using NaX zeolite. Each PSA cycle included feed pressurization/feed (FP/P), heavy reflux (HR) and countercurrent depressurization (CnD) steps; they differed only in the way the CnD step was carried out: PSA Cycle I was carried out under total reflux (i.e., with no ¹⁴CO heavy product production); PSA Cycle II was carried out with discontinuous ¹⁴CO heavy product production; and PSA Cycle III was carried out with continuous ¹⁴CO heavy product production. The effects of the CnD step valve coefficient (c _v ), heavy reflux ratio (R _R ), and cycle time (t _cyc ) on the PSA process performance were determined in terms of the ¹⁴CO enrichment, ¹⁴CO recovery and CO feed throughput. The results showed that there was essentially no limit to the extent of the ¹⁴CO enrichment, despite the inherently low ¹⁴CO/¹²CO (1.05) and ¹⁴CO/¹³CO (1.12) separation factors for these isotopes on NaX zeolite. Under total reflux an optimum c _v was found for the CnD step and ¹⁴CO enrichments as high as 152 were obtained. Using the optimum c _v under finite reflux, a ¹⁴CO enrichment approaching 20 and a ¹⁴CO recovery approaching 100 % were easily achieved with discontinuous (PSA Cycle II) or continuous (PSA Cycle III) ¹⁴CO heavy product production. There was essentially no difference in the performance of PSA Cycles II and III, a counterintuitive result. The ¹⁴CO enrichment and the ¹⁴CO recovery both increased with decreasing CO feed throughputs and higher R _R , which were always very close to unity.     

Mismatches Improve the Performance of Strand‐Displacement Nucleic Acid Circuits

Catalytic hairpin assembly (CHA) has previously proven useful as a transduction and amplification method for nucleic acid detection. However, the two hairpin substrates in a CHA circuit can potentially react non‐specifically even in the absence of a single‐stranded catalyst, and this non‐specific background degrades the signal‐to‐noise ratio. The introduction of mismatched base pairs that impede uncatalyzed strand exchange reactions led to a significant decrease of the background signal, while only partially damping the signal in the presence of a catalyst. Various types and lengths of mismatches were assayed by fluorimetry, and in many instances, our MismatCHA designs yielded 100‐fold increased signal‐to‐background ratios compared to a ratio of 4:1 with the perfectly matched substrates. These observations could be of general utility for the design of non‐enzymatic nucleic acid circuits.     

Theoretical investigation of the molecular structure,vibrational spectra,and molecular docking of tramadol using density functional theory

The optimized molecular structures, harmonic vibrational wavenumbers, and the corresponding vibrational assignments of (1S,2S)-tramadol and (1R,2R)-tramadol are computationally examined using the B3LYP density functional theory method together with the standard 6–311++G(d,p) and def2-TVZP basis sets. The optimized structures show that phenolic rings of both 1R,2R and 1S,2S tramadol adopt planar geometry, which are slightly distorted due to the substitution at the meta-position; and the six-membered cyclohexane adopts a slightly distorted chair conformation. The 1S,2S enantiomer is energetically more favorable than 1R,2R with the energy differences of 1.32 and 1.03 kcal/mol obtained at B3LYP/6–311++G(d,p) and B3LYP/Def2-TVZP levels, respectively. The analysis of the binding pocket in the silico molecular docking with the m-opioid receptor shows that it originated two clusters with the 1S,2S enantiomer and one cluster with the 1R,2R enantiomer of tramadol. The results point to a more stable complex of the m-opioid receptor with the 1R,2R enantiomer of tramadol.     

Low temperature survival of slender naiad (Najas flexilis) seeds

The response to drying and storage at -20 degrees C or in liquid nitrogen was studied in seeds of the freshwater aquatic plant Najas flexilis. The seeds of this species show some desiccation sensitivity, although post-harvest storage in water at 16 degrees C resulted in improvements in desiccation tolerance. There was 63% germination of seeds dried to 9.5% moisture content (30% RH) following this maturation period. Optimum moisture contents for seeds stored at -20 degrees C for 3 months and in liquid nitrogen for 1 week were ~11% and ~15%, respectively.     

Study of gain flatness for multi-channel amplification in single stage EDFA for WDM applications

In this paper, gain flatness is studied for simultaneous 16-ITU-T channel amplifications at C-band (1,532–1,558 nm) in a single stage EDFA for WDM application at different average inversion levels. The inversion levels are varied due to the change of the input signal levels from the targeted operating point and also for dropping few numbers of channels. Specially designed gain flattening filter (GFF) is used in order to get the flat gain with gain variation ±0.5 dB for −20 dBm/ch input signal power (total input signal power is −8.0 dBm) at a fixed average inversion level which is maintained by proper selection of optimum fibre length and pump power. A specific loss spectrum of GFF is obtained by writing a chirped fibre Bragg grating of length 20 mm. Gain variations are studied by changing the total input signal levels from −8.0 dBm to −20.0 dBm and maintained within 20.0 ± 0.5 dB by using automatic gain control (AGC) circuit. About 15 out of 16 channels are dropped and observed ± 0.5 dB gain-variation which is an important parameter in optical network system.     

Investigation into the rotational bands of ~(185)Pt with the particle-rotor model

Theoretical calculations have been performed for the ν9/2+[624](i13/2) and ν7/2-[503](f7/2) bands of 185Pt in the framework of particle-rotor model. The band properties of signature splitting and configuration mixing have been analyzed. The level energy and signature splitting before the band crossing can be well interpreted by introducing triaxiality. The positive-parity yrast band is pro posed to be dominated by the ν9/2+[624](i13/2) component, while the negative-parity band shows strong mixing of ν7/2-[5...     

HBF4·OEt2 as a versatile reagent for the Hosomi-Sakurai allylation and Prins cyclization: one-pot synthesis of symmetrical 4-fluorotetrahydropyrans

The synthesis of symmetrical 2,6-disubstituted 4-fluorotetrahydropyran derivatives has been achieved using HBF₄·OEt₂ via a tandem allylation and Prins cyclization. This is a highly efficient and diastereoselective approach for the preparation of 4-fluorotetrahydropyrans in a single step. The use of readily available and easy to handle reagent HBF₄·OEt₂ makes this method simple, convenient and practical.     

Efficient and general asymmetric syntheses of (R)-chroman-4-amine salts

Starting from a variety of substituted chroman-4-ones, a highly enantioselective CBS reduction using in situ-generated B-H catalyst gave (S)-chroman-4-ols. Azide inversion and reduction gave crude (R)-chroman-4-amines, which could be purified without chromatography by isolation as the (R)-mandelic or d-tartaric acid salts with good yields and excellent ee.     

Patterning of sol gel thin films by capillary force assisted soft lithographic technique

Patterning of sol gel based silica and silica–titania films has been developed at room temperature by soft lithographic technique. Corresponding metal alkoxides have been utilized for the preparation of precursor sols. Elastomeric stamps of polydimethylsiloxane (PDMS) are used to emboss patterns of a master grating on the as-prepared silica and silica–titania films obtained by sol gel process. Pressure-less capillary force lithography has been used to fabricate both 1-D and 2-D ordered structures of simple stripe patterns. A modified solvent assisted lithography and micro-molding in capillaries yielded stable and high fidelity 1-D structures for silica and silica–titania films over a large area.