Different apolipoproteins impact nanolipoprotein particle formation

Spontaneous interaction of purified apolipoproteins and phospholipids results in formation of lipoprotein particles with nanometer-sized dimensions; we refer to these assemblies as nanolipoprotein particles or NLPs. These bilayer constructs can serve as suitable mimetics of biological membranes and are fully soluble in aqueous environments. We made NLPs from dimyristoylphospatidylcholine (DMPC) in combination with each of four different apolipoproteins: apoA-I, Delta-apoA-I fragment, apoE4 fragment, and apolipophorin III (apoLp-III) from the silk moth B. mori. Predominately discoidal in shape, these particles have diameters between 10 and 20 nm, share uniform heights between 4.5 and 5 nm, and can be produced in yields ranging between 40 and 60%. The particular lipoprotein, the lipid to lipoprotein ratio, and the assembly parameters determine the size and homogeneity of nanolipoprotein particles and indicate that apoA-I NLP preparations are smaller than the larger apoE422K and apoLp-III NLP preparations.     

The effect of step height on the performance of three-dimensional ac electro-osmotic microfluidic pumps

Recent numerical and experimental studies have investigated the increase in efficiency of microfluidic ac electro-osmotic pumps by introducing nonplanar geometries with raised steps on the electrodes. In this study, we analyze the effect of the step height on ac electro-osmotic pump performance. AC electro-osmotic pumps with three-dimensional electroplated steps are fabricated on glass substrates and pumping velocities of low ionic strength electrolyte solutions are measured systematically using a custom microfluidic device. Numerical simulations predict an improvement in pump performance with increasing step height, at a given frequency and voltage, up to an optimal step height, which qualitatively matches the trend observed in experiment. For a broad range of step heights near the optimum, the observed flow is much faster than with existing planar pumps (at the same voltage and minimum feature size) and in the theoretically predicted direction of the "fluid conveyor belt" mechanism. For small step heights, the experiments also exhibit significant flow reversal at the optimal frequency, which cannot be explained by the theory, although the simulations predict weak flow reversal at higher frequencies due to incomplete charging. These results provide insight to an important parameter for the design of nonplanar electro-osmotic pumps and clues to improve the fundamental theory of ACEO.     

Multisite modification of neomycin B: combined Mitsunobu and click chemistry approach

The aminoglycoside antibiotic neomycin B has been converted into several novel building blocks that can be used for the specific modification of three of the four ring systems. Under carefully controlled conditions, the Mitsunobu reaction can be used to selectively dehydrate the ido ring to give the talo epoxide. Subsequently however, under more forcing conditions, the 2-deoxy streptamine ring undergoes Mitsunobu dehydration to give an aziridine. An unusual remote neighboring group effect was observed. When the primary hydroxyl of the ribose ring was blocked, aziridine formation on the deoxystreptamine ring did not occur. Both the epoxide and epoxide-aziridine neomycin building blocks can be ring-opened with azide and subjected to "click" type chemistry with terminal alkynes to generate a series of new neomycin analogues. These reactions can all be carried out without recourse to O-protecting groups. A detailed conformational analysis by NMR revealed some unexpected conformer preferences in these systems.     

Full but not strong dualities at the finite level: Extending the realm

The realm of natural dualities that are known to be full but not strong at the finite level is a very small one, consisting of a single example. This example, based on the three-element bounded distributive lattice, was presented by Davey, Haviar and Willard [8]. In this paper, we extend this realm to the class of all natural dualities based on a finite non-boolean bounded distributive lattice. Received June 15, 2005; accepted in final form November 26, 2005.     

Nanoporous microbead supported bilayers: stability, physical characterization, and incorporation of functional transmembrane proteins

The introduction of functional transmembrane proteins into supported bilayer-based biomimetic systems presents a significant challenge for biophysics. Among the various methods for producing supported bilayers, liposomal fusion offers a versatile method for the introduction of membrane proteins into supported bilayers on a variety of substrates. In this study, the properties of protein containing unilamellar phosphocholine lipid bilayers on nanoporous silica microspheres are investigated. The effects of the silica substrate, pore structure, and the substrate curvature on the stability of the membrane and the functionality of the membrane protein are determined. Supported bilayers on porous silica microspheres show a significant increase in surface area on surfaces with structures in excess of 10 nm as well as an overall decrease in stability resulting from increasing pore size and curvature. Comparison of the liposomal and detergent-mediated introduction of purified bacteriorhodopsin (bR) and the human type 3 serotonin receptor (5HT3R) are investigated focusing on the resulting protein function, diffusion, orientation, and incorporation efficiency. In both cases, functional proteins are observed; however, the reconstitution efficiency and orientation selectivity are significantly enhanced through detergent-mediated protein reconstitution. The results of these experiments provide a basis for bulk ionic and fluorescent dye-based compartmentalization assays as well as single-molecule optical and single-channel electrochemical interrogation of transmembrane proteins in a biomimetic platform.     

Ordered CdSe nanoparticles within self-assembled block copolymer domains on surfaces

Hierarchical, high-density, ordered patterns were fabricated on Si substrates by self-assembly of CdSe nanoparticles within approximately 20-nm-thick diblock copolymer films in a controlled manner. Surface-modified CdSe nanoparticles formed well-defined structures within microphase-separated polystyrene-b-poly(2-vinylpyridine) (PS-b-P2VP) domains. Trioctylphosphine oxide (TOPO)-coated CdSe nanoparticles were incorporated into PS domains and polyethylene glycol-coated CdSe nanoparticles were located primarily in the P2VP domains. Nearly close-packed CdSe nanoparticles were clearly identified within the highly ordered patterns on Si substrates by scanning electron microscopy (SEM). Contact angle measurements together with SEM results indicate that TOPO-CdSe nanoparticles were partially placed at the air/copolymer interface.     

Reversible wetting-dewetting transitions on electrically tunable superhydrophobic nanostructured surfaces

In this work, electrically controlled fully reversible wetting-dewetting transitions on superhydrophobic nanostructured surfaces have been demonstrated. Droplet behavior can be reversibly switched between the superhydrophobic Cassie-Baxter state and the hydrophilic Wenzel state by the application of electrical voltage and current. The nature of the reversibility mechanism was studied both experimentally and theoretically. The reported results can provide a new method of dynamically controlling liquid-solid interactions.     

Design of concise, scalable route to a cholecystokinin 1 (CCK 1) receptor antagonist

Development of efficient, scalable routes for the synthesis of (S)-3-[5-(3,4-dichlorophenyl)-1-(4-methoxyphenyl)-1H-pyrazol-3-yl]-2-m-tolyl propionic acid, a selective cholecystokinin 1 (CCK 1) receptor antagonist, is described. A key feature of the scale-up route is a concise construction of the complete pyrazole framework in a single step by reacting an aryl hydrazine with an elaborated acetylenic ketone. This route was then further refined incorporating efficient enantioselective strategies to obtain the desired S-enantiomer in high optical purity. The first strategy involved an efficient, recyclable, kinetic resolution by enzyme-catalyzed hydrolysis of the racemic ester. In the second-generation route, the requisite stereochemistry at the chiral center was generated at an early stage in the synthesis involving a remarkable diastereoselective addition of inexpensive (S)-(-)-ethyl lactate to an alkylaryl ketene. Both methods furnished optically pure (>99% ee) final drug substance as its crystalline sodium salt.     

Reactions of the titanium-carbide species CpTi(μ-Me)(μ-NPi-Pr3)(μ-C)(AlMe2)3

The reaction of CpTi(μ²-Me)(μ²-NPi-Pr₃)(μ⁴-C)(AlMe₂)₃ with ClSnMe₃ and MeO₃SCF₃ affords the species CpTi(μ²-Cl)(μ²-NPi-Pr₃)(μ⁴-C)(μ²-Cl)(AlMe)(AlMe₂)₂1 and CpTi(μ²-Me)(μ²-NPi-Pr₃)(μ⁴-C)(μ²-O₃SCF₃)(AlMe)(AlMe₂)₂2, respectively. Both 1 and 2 have been structurally characterized.     

Immiscible displacement in vertically fractured reservoirs

A dual-porosity model is defined for saturated, two-phase, compressible, immiscible flow in a vertically fractured reservoir or aquifer. This model allows detailed simulation of the matrix-fracture interaction as well as the matrix flow itself. This is accomplished by directly coupling the matrix and fracture systems along the vertical faces of the matrix blocks, incorporating gravitational effects directly, and simulating flow inside the block. Thus fluid segregation due to gravitational effects and heterogeneities can be simulated. We show that our model can be derived via homogenization techniques. The model (in incompressible form for simplicity of exposition) is then approximated by a computationally efficient finite difference scheme. Calculations are presented to show the convergence of the scheme and to indicate the behavior of the model as a function of several parameters.