Analysis of heterojunction resonant cavity-enhanced Schottky photodiodes by using two-valley transport model

The article concerns heterojunction resonant cavity-enhanced (RCE) Schottky photodiodes with GaAs in the absorption layer. The quantum efficiency and linear pulse response have thoroughly been analysed. For the first time, the response of a heterojunction photodiode has been modelled by the phenomenological model for a two-valley semiconductor. The results obtained have shown that the satellite valleys, as well as the parasitic time constant, significantly influence the response and, accordingly, have to be taken into account when analysing and optimizing RCE photodetectors.     

Features of polystyrene synthesis in the presence of (diphenylbutadiene)tricarbonylchromium

Features of radical polymerization of styrene in the presence of (diphenylbutadiene)tricarbonylchromium were studied.     

Effect of residual stresses on the inelastic properties of metallic composites

The stressed state of in metallic composite systems is analyzed. It is analytically shown that the temperature dependences of the internal friction in the composites may have extrema that are caused by internal stresses. The analytical results are supported by the experimental temperature dependences of the internal friction in (Cu-13% Sn)-30% Nb and Cu-1.3% Cr composites.     

Lanthanum nitrate decomposition by both temperature programmed heating and citrate gel combustion

Thermal decomposition of lanthanum nitrate to lanthanum oxide was carried out by both temperature programmed heating (TPH) and citrate-gel combustion. The temperature programmed heating was carried out under flow of oxidizing (air), neutral (nitrogen) and reducing (25 vol.% hydrogen+argone mixture) gases, and the processes were controlled by simultaneous thermogravimetry and differential thermal analysis. It was shown that hydrogen atmosphere helps to reduce temperatures of all decomposition steps. The results of TPH were utilized to check the nature of residues in the products of lanthanum nitrate-to-oxide conversion performed via citrate-gel combustion technique.     

Investigating laser rapid manufacturing for Inconel-625 components

This paper presents an investigation of laser rapid manufacturing (LRM) for Inconel-625 components. LRM is an upcoming rapid manufacturing technology, it is similar to laser cladding at process level with different end applications. In general, laser-cladding technique is used to deposit materials on the substrate either to improve the surface properties or to refurbish the worn out parts, while LRM is capable of near-net shaping the components by layer-by-layer deposition of the material directly from CAD model. In the present study, a high-power continuous wave (CW) CO₂ laser system, integrated with a co-axial powder-feeding system and a three-axis workstation were used. The effect of processing parameters during LRM of Inconel-625 was studied and the optimum set of parameters for the maximum deposition rate was established employing Orthogonal L9 array of Taguchi technique. Results indicated that the powder feed rate and the scan speed contributed about 56% and 26%, respectively to the deposition rate, while the influence of laser power was limited to 10% only. Fabricated components were subjected to non-destructive testing (like—ultrasonic testing, dye-penetrant testing), tensile testing, impact testing, metallographic examinations and micro-hardness measurement. The test results revealed defect-free material deposition with improved mechanical strength without sacrificing the ductility.     

Recovery of Butadiene-Styrene Rubber from Latex at Low Temperature with Various Coagulants

The influence of the charge of a metal cation and the nature of a coagulant on the recovery of butadiene-styrene rubber and properties of rubber stocks and vulcanizates was examined.     

Intermolecular interactions of p-nitrophenol with butyl acetate,according to IR spectroscopic data

Infrared difference spectroscopy has been used to study the association of p-nitrophenol (NP) with butyl acetate (BA) in CCl₄ and in undiluted BA. It has been shown that in CCl₄, an associate is formed, [NP·BA] ·BA (Ia), in which one molecule of BA is linked to the NP by a hydrogen bond, and the second BA molecule is linked to the H-complex NP·BA by outer-sphere (dipole-dipole) interaction. In undiluted BA with low concentrations of NP, (Ia) is formed; with high concentrations of NP, an associate [(NP)₂BA] ·mBA is formed, in which two molecules of NP are bonded successively to each other and with a BA molecule; and the number of outer-sphere BA molecules may depend on the concentration of free BA molecules in the solutions.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 3, pp. 593–599, March, 1991.     

An implicit characteristic-flux-averaging method for the euler equations for real gases

A formulation of an implicit characteristic-flux-averaging method for the unsteady Euler equations with real gas effects is presented. Incorporation of a real gas into a general equation of state is achieved by considering the pressure as a function of density and specific internal energy. The Ricmann solver as well as the flux-split algorithm are modified by introducing the pressure derivatives with respect to density and internal energy. Expressions for calculating the values of the flow variables for a real gas at the cell faces are derived. The Jacobian matrices and the eigenvectors are defined for a general equation of state. The solution of the system of equations is obtained by using a mesh-sequencing method for acceleration of the convergence. Finally, a test case for a simple form of equation of state displays the differences from the corresponding solution for an ideal gas.     

The effect of the external lateral electric field on the luminescence intensity of InAs/GaAs quantum dots

We report on low-temperature microphotoluminescence (μ-PL) measurements of InAs/GaAs quantum dots (QDs) exposed to a lateral external electric field. It is demonstrated that the QDs’ PL signal could be increased severalfold by altering the external and/or the internal electric field, which could be changed by an additional infrared laser. A model which accounts for a substantially faster lateral transport of the photoexcited carriers achieved in an external electric field is employed to explain the observed effects. The results obtained suggest that the lateral electric fields play a major role for the dot luminescence intensity measured in our experiment—a finding which could be used to tailor the properties of QD-based optoelectronic applications. The text was submitted by the authors in English.